There is she is on top of my very limited edited antique white cerakote dipped naval brass manhattan. ( Only 40 were made ) And a tobh brass drip tip
RDA Hobo Rda
- Thread starter FatherTime
- Start date
- th_trl_thread_readers 0
- Status
There is she is on top of my very limited edited antique white cerakote dipped naval brass manhattan. ( Only 40 were made ) And a tobh brass drip tip
Mine leaks only if I take the top off to drip like that. If I drip through the drip tip it doeant happen. I notice when I take the top off, without whipping the juice off the o rings, then when I go to put the top back on it sprays juice everywhere and sometimes it sits between my hobo and mod right at the bottom. But other wise its never leaked through the holes at all.
Ok, I've seen this image a time or two here today. What am I missing here? That's a stairwell. The mod looks like it is magnetized to the wall there. What's going on?
Nice setup btw.
HaHa 8-o IDK whats going on my world is turning sideways on me.......!!!!
Nah your right that in the stairwell at my job in manhattan. And the manhattan mod is stuck to the metal railing sideways bc of the ungodly strong rare earth magnet that they use in the switch. It will stick to anything metal and hang upsidedown with out falling. Hell I even run the mod over the top of my rug and it picks up every piece of kanthal stuck in the rug. LOL many uses for this device.
Nah your right that in the stairwell at my job in manhattan. And the manhattan mod is stuck to the metal railing sideways bc of the ungodly strong rare earth magnet that they use in the switch. It will stick to anything metal and hang upsidedown with out falling. Hell I even run the mod over the top of my rug and it picks up every piece of kanthal stuck in the rug. LOL many uses for this device.
Ok, I've seen this image a time or two here today. What am I missing here? That's a stairwell. The mod looks like it is magnetized to the wall there. What's going on?
Nice setup btw.
Ok, I've seen this image a time or two here today. What am I missing here? That's a stairwell. The mod looks like it is magnetized to the wall there. What's going on?
Nice setup btw.
lol good catch. I didnt even notice
wow thats a pretty strong magnet. really like the set up
HaHa 8-o IDK whats going on my world is turning sideways on me.......!!!!
Nah your right that in the stairwell at my job in manhattan. And the manhattan mod is stuck to the metal railing sideways bc of the ungodly strong rare earth magnet that they use in the switch. It will stick to anything metal and hang upsidedown with out falling. Hell I even run the mod over the top of my rug and it picks up every piece of kanthal stuck in the rug. LOL many uses for this device.
Jesus! That is one helluva magnet.
Thanks, yea this is my new favorite setup. Its almost 2 pretty to bring out of the house to work on a daily basis.
And yes the magnet is very strong even overkill sometimes but its fun to mess with ppls head for a few seconds when they see a mod hanging sideways off a wall lol
And yes the magnet is very strong even overkill sometimes but its fun to mess with ppls head for a few seconds when they see a mod hanging sideways off a wall lol
So my replacements came in the mail today and im very happy with them. He gave me 2 stainless steel blocks and some slotted set screws. I will say this, this man stands behind his product, no questions asked, except my mail address lol and shipped it priority. Even if I didnt like this rda I would give it thumbs up just for the modder himself.
HOBO RDA V2 / SS MCR101 with recessed switch I haven't had a chance to build it yet but I love the way it looks, and very nice build quality.
I haven't had a chance to build it yet but I love the way it looks, and very nice build quality.
Hmmm, maybe I should say "weeps" rather than leak. Juice seems to gather in the air inlets before finally running down the side. Possibly it is just me, as my Odin does the same thing. Appreciate the input nonetheless.
Yeah I'm back to drippin through the top and not popping off the top section cuz it's too messy. I liked being able to put eyes on the wick and well to see how saturated and how much free flowing juice is down there or how dry it's looking to try to drip before dry hit. We're still getting each other figured out. Gunna need to lower nic though for sure. Great vape.
Does the recessed MCR switch lock? Love my papsX switch. Like the Workhorse recessed but no lock so I'm not comfy carrying it around in the pocket. Have an NZonic IV with magnets and locking mechanism but the switch is a little finicky. In my limited experience the papsX is way out front.
No, it does not.
It's one of the best switches I've ever tried (the X switch is pretty fantastic too, though).....
Awesome man thanks! I was wondering what size it was, I knew it wasnt normal and figured the only place I could go to and buy it was a hobby store. Which site did you purchase yours through?
I bought mine from wiha item no. 26309. wiha are the best tools ive ever used. extremely high quality. I buy all my pliers and precision screwdrivers from them.
Wiha Precision Hex Drivers .028 to 5/32
Hoberto(the creator) recommends doing this "go to mcmaster.com and type the part# 7043A12." Thats the one he uses/recommends .
Heres the full quote
"they are .035, go to mcmaster.com and type the part# 7043A12. this is what i use, and what i recommend, they also have replacement tips so i suggest you get a few since they are really low cost."
Wiha Precision Hex Drivers .028 to 5/32
Hoberto(the creator) recommends doing this "go to mcmaster.com and type the part# 7043A12." Thats the one he uses/recommends .
Heres the full quote
"they are .035, go to mcmaster.com and type the part# 7043A12. this is what i use, and what i recommend, they also have replacement tips so i suggest you get a few since they are really low cost."
Excellent, I will be buying some of these as a just in case scenario. Thank you for this vital information.
- Status
Similar threads
- Locked
