House of Hybrids featuring the Zenesis PV

[Zen~]

taken from the article:

"Shallow Stones are Fragile!

Not only do Spread Stones lose beauty and light, but they also become more fragile!

When Diamonds get shallow and thin, they become vulnerable, especially around the outer edge of the Diamond, which is called the Girdle. This edge can chip or break more easily because the Crown Facets (top of the Diamond) and Pavilion Facets meet at more of a sharp angle.

In fact, the entire Diamond becomes more prone to breaking since the stone gets so narrow. The odds of damage are greatly escalated!

Not only do YOU have to be more careful when wearing a Spread Diamond, but even Jewelers have to be more careful when setting them into heads or mountings."

This is a Zenesis you REALLY don't wanna drop!

Nah... put the diamond in a bezel setting to protect the girdle and it will be fine. LOL... the first diamond encrusted Hybrid and now we gotta have people complaining about the type of diamond... what the heck is wrong with some people... sorry... but sheeesh... Anything POSITIVE to add?

Oh, this might be a good question for the FAQ if Zen~ has an answer for me. With the Z-Atty-Pro - do we just set it to 3.7 and vape? Or is there a voltage to avoid (5v and up maybe?)

Honestly, Mine is set at 3.9volts all the time.

Everything has been at a standstill until the eCommerce thing was sorted out. ZA payment requests should be going out soon to the people on the list. After all that is settled, the ZAs will be put on the HOH site, probably in a week or two.

Yep...

SO... good news and bad news...

The eCommerce is fully approved, gateway settings generated... everything I need to move forward...

EXCEPT...

Zen Cart 1.5.0 is not compatible with eProccessing Network. I spent 3 hours with the tech support people, and the the reality is there is no payment module that bridges the two.

Sooooo....

Not tonight folks... I'm going to find a QUICK solution for a new cart, and get this baby running by the weekend.

THE BAD PART IS OVER...

The next part is all in my hands, and I can get stuff done, since I do not sleep!

Stay tuned!

 

[zygote]

Nah... put the diamond in a bezel setting to protect the girdle and it will be fine. LOL... the first diamond encrusted Hybrid and now we gotta have people complaining about the type of diamond... what the heck is wrong with some people... sorry... but sheeesh... Anything POSITIVE to add?



Honestly, Mine is set at 3.9volts all the time.



Yep...

SO... good news and bad news...

The eCommerce is fully approved, gateway settings generated... everything I need to move forward...

EXCEPT...

Zen Cart 1.5.0 is not compatible with eProccessing Network. I spent 3 hours with the tech support people, and the the reality is there is no payment module that bridges the two.

Sooooo....

Not tonight folks... I'm going to find a QUICK solution for a new cart, and get this baby running by the weekend.

THE BAD PART IS OVER...

The next part is all in my hands, and I can get stuff done, since I do not sleep!

Stay tuned!

For scenes from are next upcoming debut......2016....LOLOLOLOLOLOL...take your time we'll be waiting.

 

[spw11]

I don't think anyone was complaining... In fact I'm sure of it. We just got into a discussion about the unusual cut. If I'm not mistaken, that was a clip from an artical on the subject of shallow cut diamonds. Perhaps you didn't see all of verbal drooling over the pictures.... It's a STUNNING, STUNNING piece Zen~. As I said before... You are an artist sir.

Nah... put the diamond in a bezel setting to protect the girdle and it will be fine. LOL... the first diamond encrusted Hybrid and now we gotta have people complaining about the type of diamond... what the heck is wrong with some people... sorry... but sheeesh... Anything POSITIVE to add?

 

[emonty]

Good news Zen, thank you very much for the update!!

 

[BluSwatch]

I know ASH and I were drooling. LOL

 

[krnxguhj33]

Zen~,

Thank you for all of your hard work! :]

I can not do the whole no sleep thing and as such, I shall be taking a nap.

 

[zygote]

I don't think anyone was complaining... In fact I'm sure of it. We just got into a discussion about the unusual cut. If I'm not mistaken, that was a clip from an artical on the subject of shallow cut diamonds. Perhaps you didn't see all of verbal drooling over the pictures.... It's a STUNNING, STUNNING piece Zen~. As I said before... You are an artist sir.

I'll take one.....pleeeeease.

 

[zygote]

No WE don't...........YOU want it

You are soooooo right, want it, gotta have, mabye don't need it, but i luuuuuuv it!

 

[Filibuster]

Go Zen! Looks like you're just about set. Can't wait to see how far your Zenpire spreads! I'm thinking it'll be like the old timey Romans... Without the whole over extending and collapsing part, of course.

 

[*ASH*]

Thanks for the update Zen now I think I can sleep and wait more 1 - 2 days all what I hope just that will inform us before like 1 day so we can just be online.

My best regards for you bro

 

[zygote]

Thanks.... good to be home, though it will be short lived.

Got called to another high priority job, will be heading out Saturday or Sunday to be at the plant on Monday morning. I use to think being a part of an elite group was awesome..... now is just a pain. Ready to be a regular Joe again. I'm just glad I have an amazing woman at my side that understands and supports me, and tolerates my travels.

Take while you can brother, when it rains it pours, being away from home does give one an empty feeling althoug knowing you are coming home feels real good, and seeing other peoples and cultures is fascinating.

 

[the ob]

Did any body see the ss don and a kick for 350 in the classie. That singapore $. How much is that equal to U S.
OB Did you see that. I know you was looking for one.

thanks. I saw it. That is more than I want to spend on that.

 

[zygote]

You'll fry your coils not to mention your throat. Do yourself a favor and get some 18650's before you get your Z.

Just got an ego twist and did just that fried my coil at 4.8,damb the vape was hot! Waiting for my standard so i don't have to waste any more $ on this junk.

 

[zygote]

Wait nipples? And I missed it? Damn it, I miss all the fun stuff.

I'll say it again....we....excuse me....I want bush!

 

[lexi60]

Zen, are the titaniums still shipping tomorrow?

 

[dearme]

Go Zen! Looks like you're just about set. Can't wait to see how far your Zenpire spreads! I'm thinking it'll be like the old timey Romans... Without the whole over extending and collapsing part, of course.

I think we are safe. I don't think Zen will play a fiddle, or a lyre........LOL

 

[zygote]

<------- Well hey, looky there. My ECF Veteran status popped in, yeah!

CONGRATS, MY GOOD MAN.

 

[Pega]

If anybody has some information or at leas a "the site won't go live till tomorrow afternoon". This is the third time I am waiting up for this, and would like to know cause I need to get away from the pc (it's 2 am here)

 

[pounder]

I'll say it again....we....excuse me....I want bush!

Well move to Crawford Tx. and you can have all the Bush you can handle.

 

[spw11]

On the page just before this one...

Posted by Zen~

SO... good news and bad news...

The eCommerce is fully approved, gateway settings generated... everything I need to move forward...

EXCEPT...

Zen Cart 1.5.0 is not compatible with eProccessing Network. I spent 3 hours with the tech support people, and the the reality is there is no payment module that bridges the two.

Sooooo....

Not tonight folks... I'm going to find a QUICK solution for a new cart, and get this baby running by the weekend.

THE BAD PART IS OVER...

The next part is all in my hands, and I can get stuff done, since I do not sleep!

Stay tuned!

If anybody has some information or at leas a "the site won't go live till tomorrow afternoon". This is the third time I am waiting up for this, and would like to know cause I need to get away from the pc (it's 2 am here)