House of Hybrids featuring the Zenesis PV

[RippleInStillWater]

Morning, monty -- and titanium in hand yet?

 

[grruss]

I forgot I ordered that juice.

260 ml... I didn't forget.

Sent from my Galaxy Nexus

 

[sl_rat]

hey tybin, I used to own a Provari v1 and always got errors, are the new ones still having that problem? Everyone is raving about the ZaP and wanted to try it out.

hey BassMonkey,
the Provari V1 will work with a ZAP but you must put 6 wraps on the coil. the V2 is a little bit more forgiving so you can use less wraps. this information comes directly from the mouth of Zen. i was the beta tester for the ZAP and all i can say is YOU WANT ONE!!! i have used nothing else since May!

 

[T-Mac]

I sure hope I like all of that NLV liquid I bought. The wait is excruciating.

lol i'm waiting to i have some bh left but not a lot. i'm waiting for gold and caramel flavors if you don't like the bh let me know and we could trade some flavors

The only notice I got from them was the night I ordered. You guys gotten an email or anything else yet? I'm not in a rush just making sure I'm not missing anything.

 

[T-Mac]

hey BassMonkey,
the Provari V1 will work with a ZAP but you must put 6 wraps on the coil. the V2 is a little bit more forgiving so you can use less wraps. this information comes directly from the mouth of Zen. i was the beta tester for the ZAP and all i can say is YOU WANT ONE!!! i have used nothing else since May!

I totally agree with this, the 3 days my wife let me use mine was vape HEAVEN.

 

[stevo123]

The only notice I got from them was the night I ordered. You guys gotten an email or anything else yet? I'm not in a rush just making sure I'm not missing anything.

no the next email you will get will be your shipping notice it should be soon though

 

[grruss]

Okay, so my Standard started its tricks again last night, and today the Ti started doing it. I'm pretty sure it's a wicking problem. One thing in common between these two is that I have replaced the PTFE insulator. I had a hard time getting the insulator to slide into place on both devices. What if, when sliding the insulator into place, I "mushroomed" it, causing the insulator to pinch the wick, preventing wicking?

Sent from my Galaxy Nexus

 

[cryptodogg]

no the next email you will get will be your shipping notice it should be soon though

It seemed like a month from date order was placed, till the order shipped, on my last order from NLV.

 

[grruss]

It seemed like a month from date order was placed, till the order shipped, on my last order from NLV.

Good to know. Mines been "processing" since 7/25.

Sent from my Galaxy Nexus

 

[dearme]

Hi Zenfidels. I am back, the pool hall was a bust...

I am definitely getting a licorice note in this raspberry bacco and it is either:

1) I have shorts in my coils, or some other fault, and I am interpreting the metallic taste as licorice. It doesn't taste metallic though. I have checked for shorts, and all the coils are glowing evenly. The wick isn't touching the bottom of the tank or the top cap, I have checked for that several times. I am getting an adequate amount of vapor, although not the clouds I was expecting.
2) Some flavor somehow jumped bottles from the Black Ice that the Raspberry Bacco was stored next to. Although I don't see how that is possible, the Black Ice is in it's own ziplock baggie, as it was shipped that way.
3) Something else I am not thinking of...

It's not bad, it's just kinda strange. I am getting a really strong throat hit, but I think I just need the wick and coil to break in. Either way I am gonna Just Vape It and see what happens.

If it's not a short, it's a wicking problem. Is it a new wick and still in the break in phase?

Always make sure your air hole and wick are directly in line and always vape with them pointing down.

Vape with the APV in the 3 o'clock position or even higher. Most people vape at 4 or 5 o'clock after it's broken in.

Until it's broken in, store it upright, slightly tilting, with the wick in the juice.

You will get more vapor when the wick is broken in.

Don't have any ideas on the licorice, except that it has a stronger smell than some other juices and maybe could contaminate other juices if stored or shipped together????

 

[sl_rat]

Okay, so my Standard started its tricks again last night, and today the Ti started doing it. I'm pretty sure it's a wicking problem. One thing in common between these two is that I have replaced the PTFE insulator. I had a hard time getting the insulator to slide into place on both devices. What if, when sliding the insulator into place, I "mushroomed" it, causing the insulator to pinch the wick, preventing wicking?

Sent from my Galaxy Nexus

it's possible grruss. did you replace the original PTFE insulator? if so, why? try using a very thin syringe needle and pushing it through the center of your wick. i use the yellow ones. i think they're .22. i make sure that it stays "straw like".

 

[grruss]

it's possible grruss. did you replace the original PTFE insulator? if so, why? try using a very thin syringe needle and pushing it through the center of your wick. i use the yellow ones. i think they're .22. i make sure that it stays "straw like".

Did that with a sewing needle on both devices. Both coils light up when held vertically. Lights gradually go out from the bottom up when turned horizontal. After that they're okay for about two draws. Then they start burning. Open all the way through, but still I wonder.

Sent from my Galaxy Nexus

 

[tybin]

russ, i heard someone say you are using 325 mesh. does it still do this issue with 400?

 

[*ASH*]

Finaly Today is the day yes now am just waiting for the Notifaction mail from Zen

 

[grruss]

russ, i heard someone say tou are using 325 mesh. does it still do this issue with 400?

Doesn't seem to make any difference.

Sent from my Galaxy Nexus

 

[tybin]

psst. ash the ding dang engraver went on vacation without telling zen. next week instead.

 

[sl_rat]

Did that with a sewing needle on both devices. Both coils light up when held vertically. Lights gradually go out from the bottom up when turned horizontal. After that they're okay for about two draws. Then they start burning. Open all the way through, but still I wonder.

Sent from my Galaxy Nexus

what angle are you holding the device at when you vape?

 

[Paislia]

psst. ash the ding dang engraver went on vacation without telling zen. next week instead.

Spoil sport.

 

[grruss]

what angle are you holding the device at when you vape?

Tried them all. 2:00-6:00

Sent from my Galaxy Nexus

 

[cryptodogg]

Finaly Today is the day yes now am just waiting for the Notifaction mail from Zen

Click on Zen Alert's in my signature.