I was going on memory... who are you to mess with my reality by posting FACTS...
Some people...
LOL!
I can hardly wait to see you this weekend!
- Status
I was going on memory... who are you to mess with my reality by posting FACTS...
Some people...
LOL!
I can hardly wait to see you this weekend!
i still have some of the wicks but i have one i made 5/8 around paper clip in now, just fired new coil (blah) , should have made sure it was wet first.
ok, lets see a picture of the oxidation... we've added a new variable that wouldn't be there with the pre-rolled pre-oxidized ones.
Are you wetting and burning the mesh a few times before wrapping the coil?
Are you wetting and burning the mesh a few times before wrapping the coil?
OMG! The PO info was wrong!!! It's here!!! Here is a crappy first impression video - I was too excited to do much more - gotta play with it, I tell you what! Squeeeeeeeeeee!!!
FINALLY a Video in 1080P. Looks great! Thanks
Just a reminder to the Marchies getting your PVs... I said this for the Febbies as well...
The mesh and coil I ship it with is setup from the start, and it was fired and tested at TWO stages in production... there is really NO NEED to toss that out if you're having trouble... learn how to get that one to work before blowing through all your supplies.
I send literally a full years worth of supplies and a completely functional setup as well. Don't get impatient and rip it out... learn how to adjust the coil that is on it, because once you have bailed, it is that much harder to learn.
ALL YOU HAVE TO DO WHEN YOU GET THE PV IS POKE THE COIL TO CLEAR THE SHORTS
The mesh and coil I ship it with is setup from the start, and it was fired and tested at TWO stages in production... there is really NO NEED to toss that out if you're having trouble... learn how to get that one to work before blowing through all your supplies.
I send literally a full years worth of supplies and a completely functional setup as well. Don't get impatient and rip it out... learn how to adjust the coil that is on it, because once you have bailed, it is that much harder to learn.
ALL YOU HAVE TO DO WHEN YOU GET THE PV IS POKE THE COIL TO CLEAR THE SHORTS
yes, i am fairly confident in my wick making as i have 7 other genesis that i have no problem with
Why... I don't wet them first to adjust the coil... watch the video! Do I wet the wick before adjusting the coil?
3.5 did help, working better now. did my test with low battery but wick was unable to glow. no hot spots. best luck so far.
i switched wicks cause i am a febuary, you said marchies would get wick 5/8 around paper clip, so thaught id give it a try
time to set it aside, try again when i have spare time. so do you recommend i go back to the febuary wick then?
The fastest way to get rid of the shorts is to get a small flat screwdriver and move the coils gently while they are glowing till you get them glowing evenly. This way you can see the shorts go away and won't have to adjust / test / adjust / etc. so much.
Also, make sure you keep the spots that are shorting well covered in juice so that the coil does not "pop" on you while adjusting. This will also help remove shorts between the mesh and coil.
Good luck and happy modding
This thing is too fng BADASS coil needed tweaking followedZens~ instructions to the letter been vapin 80/20 green apple mentho on the 400 wick no problems whatsoever the draw is perfect not one single misfire or non fire the MAWN ridgemont is BADASS also Kcos rules kisses for her pix later vapin bliss MINI #0094 at home!!!!!living room foggy!!!¡!!!
ok lorderos, been doing that but with a wood skeur, mostly done it dry though. my problem is i get it all good, vape a little, taste goes south, pop the cap, see it has shorted again, adjust, do it all over again
Totally jealous of you Zen Standard owners! Any of you want to trade that beauty for a brand new Provari with 5 tanks? hehe
Still holding out for a z-atty-pro next month. I'm sick of the taste of cartos. It's almost got me wanting to quit vaping :/
Still holding out for a z-atty-pro next month. I'm sick of the taste of cartos. It's almost got me wanting to quit vaping :/
I'm sorry there are those that are still having issue with their Zenesis.
Used to get dry hits myself, I'd hold the mini upside down, let the juice drip from the wick and then get a few good vapes before I'd hit dry again. I fixed that issue, no more dry hits, just good stuff and I did NOTHING to my mini, I changed the way I was holding it.
Before I held my mini almost vertical while vaping it. Never held a cigarette that way but during my almost 2 years of vaping, I got into the habit of holding my devices up to my mouth like it was a microphone. After pondering what I could do different without tearing everything down again, I thought about how I could keep that wick wet.
I then had a ah ha moment with my mini Zenesis and thought, keeping the wick immersed in the liquid while vaping would surely end the dry hits and it did. No more dry hits and all I had to do was change me, change the way I held it.
Now, I hold my mini straight out in front of my face, horizontal, parallel to ground. The vent hold in the cap is in line with my wick and they face the floor too. This way, my wick is totally immersed in the eliquid when I'm vaping it and it's awesome now!
I love my mini so much now, I'm kicking myself for not getting the standard as well when I ordered.
I'm glad you found a way to get it to work for you, but personally I'd rather not have to think about which way my vent hole is facing every time I take a drag - that would get old to me in very short order.
I'm sure Zen's design does not require this sort of orientation, although I haven't got mine to produce a satisfying vape yet, I have faith in the design.
- Status
Similar threads
- Locked
