Wait a minute.....you post those pics and leave yourself out??? That wasn't right! 
- Status
Wait a minute.....you post those pics and leave yourself out??? That wasn't right!
How can I take pics of myself?
I think I escaped all picture taking! 
How can I take pics of myself?
Sounds like Wifey. She's constantly clicking away, behind the camera, but nearly impossible to catch on the lens side...
I cracked my sole Zenesis quartz tank! It cracked when it tipped an fell on my wooden table. An entire vertical strip cracked and separated from the tank. So I guess I am out of Zenland for a while Seems like my Genesis journey is a long one which just got paused as my Zenesis was my only alternative to expensive atties or horrible cartos.
Does anyone know if Zen has any available spare tanks yet?
Seems like my Genesis journey is a long one which just got paused as my Zenesis was my only alternative to expensive atties or horrible cartos. Does anyone know if Zen has any available spare tanks yet?
I cracked my sole Zenesis quartz tank! It cracked when it tipped an fell on my wooden table. An entire vertical strip cracked and separated from the tank. So I guess I am out of Zenland for a while
Does anyone know if Zen has any available spare tanks yet?
I haven't seen anything about them being available in mass yet. May have missed it. It should be soon though. There have been a couple people posting fixes in the thread. If you have a 20 mil syringe it can be cut down to work until you get a proper replacement. Some have also gotten tubing online or from hardware stores. The proper dimensions were listed, will do a search in a bit and edit post with them.
post 10460 Zen
The correct tubing size is 3/4 ID and 7/8 0D
Last edited:
Thank you both for the reply. It is quite impossible to take the kick out without destroying part
of the wrap on its body, or the kick itself, with either of the tools suggested.
I shall need to think of a different remedy.
Thanks again.
of the wrap on its body, or the kick itself, with either of the tools suggested.
I shall need to think of a different remedy.
Thanks again.
The Zenesis is a one piece design so it is impossible to take apart. To remove the kick, just get a long thin needle-nose pliers and grab the kick by the positive post then pull it out
I put the kick im mine as well.. To get it out, I tapped it in my palm till it got to the bottom and used my finger nail to pop it out.. I had to take the top cap off cause it wanted to fly while i was tapping it on my palm.. I dont really know where my kick is set but it seemed to lower the performance of the coil...
someone has to have a pic of vic to post
she conveniently left herself out of them
she conveniently left herself out of them
someone has to have a pic of vic to post
she conveniently left herself out of them
...... brat ......
Just wanted to pop in and say it was a pleasure to meet Zen in person at Vapebash. He really is the all and powerful Zen! It was really a pleasure meeting the greater vaping community.
Yes you are
I can't help it. Hey...your package is in the mailbox. You should have it soon! You should have seen zen~'s face when he saw my "too big" tank.
I think his remark was, "I like what you've done with the place." I holds liquid! They will be great for emergency replacements for you.
safe flight bumpi, Welcome home vicsan! nice report and pics now i know i am in the right hands w/Zen as ceo and all of yourselfs who care about maintaing the zensis to top working order not just about the almighty $. april showers bring may Zenesis
I cracked my sole Zenesis quartz tank! It cracked when it tipped an fell on my wooden table. An entire vertical strip cracked and separated from the tank. So I guess I am out of Zenland for a while
Does anyone know if Zen has any available spare tanks yet?
If Amazon.com ships to India, this is the polycarbonate tubing I bought:
Clear Polycarbonate Tubing, 3/4" ID, 7/8" OD, 1/16" Wall, 3' Length
You will need 3/4" dowel rod to support it as you cut it:
Amazon sellers sell that too if you can't find any locally.
Here's the tubing cutter I used:
Ridgid 40617 1/4-Inch to 1-1/8-Inch Close Quarters Tubing Cutter
Cut a bunch of these and you will never be without a tank if the quartz should break.
The correct tubing size is 3/4 ID and 7/8 0D
Mini is: 1" tall (febbies are 1 1/16")
Standard is: 1 5/16" tall (so are febbies)
Thanks, zygote! Every time I read your screen name I am so tempted to change mine to Blastocyst.
The Zenfidels are a fun group...and dedicated to the Zenesis. It will be worth the wait. You WILL love it! It's a true beauty!
- Status
Similar threads
- Locked
