Thanks nin, I will check into that. I will ask in the Canada forum as well.
Maybe someone else will have some other ideas too.
- Status
Maybe someone else will have some other ideas too.
He's very flexible. I'm sure he would be more than happy to wait for a money order, but you might want to ask him first. I don't know how that would work on his HOH checkout system. I don't remember seeing a cash option on there, but that's not to say it isn't there.
Hopefully zen~ will see your post and answer your question.
Thanks Vic
I see the comedian is still here. The crickets are waiting for him.
Hiya Mr. P
I'm taking my crickets and going home
I'm taking my crickets and going home
...those were crickets???
I put in an order last night and recieved a notice not quite 2 hours later that it had shipped already.
Saw that eh?
How come you have time to look at other threads??? lol
Hey I love my upstate NY inventor peeps (like Zen for stellar example
)
Dont you heat the wick with the flame thrower then dunk what is left of it in a cup of cold water?
Thanks! Went well. Now I just feel like I had 5 huge needles stuck into my back.
You might want to try and make sure the tip of your wick is open--like a straw.
I use a large safety pin to open mine up if it gets pinched shut. A large needle will also work.
Once you have the wick open, do the tilt and fire. With the cap off, tilt the PV so you can see the wick saturate with juice. Now pulse the fire button to sizzle the juice off. You don't want to dry burn it, you just want to fry the juice off. Now tilt and fire again. Repeat a few a times. Then give it a vape.
I had some wicking issues starting out, but once it broke in, I was good to go. If there is a chance your wick got kinked at some point you may consider replacing it, but if you're rolling with the stock set up, that is unlikely. You're best served by following your present course of trying to get it wicking
Let us know how it goes.
Hi all,
I gotta say, Since seeing a Zenesis at Vape Bash It has been the #1 thing I've wanted to try. I was lucky enough to order a Standard and a BAM on the same day. Reading this thread for the past month and a half has only fueled my desire for it. I've had high hopes reading all the praise everyone here has for the Zenesis but to tell the truth I've had low exceptions due to my failed attempts with other rebuildable genesis type mods. More then anything I wanted the Zenesis to work but I just knew it would let me down. I got my first Zen standard yesterday and my 2nd standard today. After a day with it all I can say is I was wrong. They both are working just as well as everyone here has described. The used one I got yesterday needed to have a wick put in it and a coil made for it. It took me less then 5 min for me to get it up and running. The first half tank of juice had a bit of a metal taste but that went away. The new one from Zen that came today only tasted funny for the first few hits and now both are vaping better then I had dreamed they could. For me the only down side is the bottom button. I have never liked PV's with bottom buttons. I am working through it and I'm sure the bottom button thing will grow on me. I know for sure I want to get some of the Z-atty's (P and U) so I can enjoy a Zen with a side button PV.
I gotta say, Since seeing a Zenesis at Vape Bash It has been the #1 thing I've wanted to try. I was lucky enough to order a Standard and a BAM on the same day. Reading this thread for the past month and a half has only fueled my desire for it. I've had high hopes reading all the praise everyone here has for the Zenesis but to tell the truth I've had low exceptions due to my failed attempts with other rebuildable genesis type mods. More then anything I wanted the Zenesis to work but I just knew it would let me down. I got my first Zen standard yesterday and my 2nd standard today. After a day with it all I can say is I was wrong. They both are working just as well as everyone here has described. The used one I got yesterday needed to have a wick put in it and a coil made for it. It took me less then 5 min for me to get it up and running. The first half tank of juice had a bit of a metal taste but that went away. The new one from Zen that came today only tasted funny for the first few hits and now both are vaping better then I had dreamed they could. For me the only down side is the bottom button. I have never liked PV's with bottom buttons. I am working through it and I'm sure the bottom button thing will grow on me. I know for sure I want to get some of the Z-atty's (P and U) so I can enjoy a Zen with a side button PV.
Yay Fran! I'm so glad you like them! Did you put the new one on the easiest button setting? I had a really hard time with the button (carpal tunnel) until I did that... now, no problems!
Hi all,
I gotta say, Since seeing a Zenesis at Vape Bash It has been the #1 thing I've wanted to try. I was lucky enough to order a Standard and a BAM on the same day. Reading this thread for the past month and a half has only fueled my desire for it. I've had high hopes reading all the praise everyone here has for the Zenesis but to tell the truth I've had low exceptions due to my failed attempts with other rebuildable genesis type mods. More then anything I wanted the Zenesis to work but I just knew it would let me down. I got my first Zen standard yesterday and my 2nd standard today. After a day with it all I can say is I was wrong. They both are working just as well as everyone here has described. The used one I got yesterday needed to have a wick put in it and a coil made for it. It took me less then 5 min for me to get it up and running. The first half tank of juice had a bit of a metal taste but that went away. The new one from Zen that came today only tasted funny for the first few hits and now both are vaping better then I had dreamed they could. For me the only down side is the bottom button. I have never liked PV's with bottom buttons. I am working through it and I'm sure the bottom button thing will grow on me. I know for sure I want to get some of the Z-atty's (P and U) so I can enjoy a Zen with a side button PV.
The new Standard you received today was shipped with the resistance set to MEDIUM. You can change that to LOW resistance which makes firing the switch a breeze and effortless.
Unscrew the switch, on the button end you will see a small magnet on top of a thicker magnet and there's a small magnet around the screw post. Remove the small magnet from the large magnet on the button end and screw the switch back together while pinching it together... making sure the two magnets are resisting each other. That makes pushing the switch a lot easier. I use my middle finger for firing the switch which works much better than my pinky.
- Status
Similar threads
- Locked
