House of Hybrids featuring the Zenesis PV

[Zen~]

Wow thats crazy! and to think I bought my lathe to attempt to build one, as Mr. Miagi once said 'you have much to learn young grasshopper' I have a feeling it might take me a month too build one

You can build one on a Mini lathe in about 5 hours.... not including polishing

It's easy....

Start with 5/8 Aluminum... Chuck it up... Bore out the battery area... Set the change gears for threading it.... do the inside thread... face off the end.... turn the OD.... part it off... turn it around and face it off... set that aside...

Pop some 3/4" stock in and turn the OD of the center post, then the O-ring grooves... then core it out... face it off... turn it around and face the other side... in a drill press drill the wick, filler and ground screw hole... tap that...

Now pop in your 5/8 stock, bore out the cap, face it off, part it off and turn it around to chamfer the top... face offf the top...

You're almost done...

Next... make the switch... 5/8 stock... bore it... turn the major thread size... thread it... build a fuxture to hold the part and turn it around and make the welll for the switch button.... part that off

Now make the button... do the post first then part it off, flip it and face off the bottom...

Now ya need some half inch delrin... make the switch bushing...

And start polishing!

 

[MissEmma]

I don't go "there" anymore. I spent so much time "there" that they gave me a key and my own mail slot.

I haven't had the opportunity to gutter hop for quite awhile. This is more like me....I like it here.

 

[tybin]

night sedge

 

[Katz123]

Zen~ I have to tell you that the Standard that I took to the local vape meet was the hit of the party. The poor thing had so many other peoples drip tips on it that it felt like a sl*t and needed a bath when she got home.

EDIT: Everyone Loved the Vape!!!!!

 

[JENerationX]

You can build one on a Mini lathe in about 5 hours.... not including polishing

It's easy....

Start with 5/8 Aluminum... Chuck it up... Bore out the battery area... Set the change gears for threading it.... do the inside thread... face off the end.... turn the OD.... part it off... turn it around and face it off... set that aside...

Pop some 3/4" stock in and turn the OD of the center post, then the O-ring grooves... then core it out... face it off... turn it around and face the other side... in a drill press drill the wick, filler and ground screw hole... tap that...

Now pop in your 5/8 stock, bore out the cap, face it off, part it off and turn it around to chamfer the top... face offf the top...

You're almost done...

Next... make the switch... 5/8 stock... bore it... turn the major thread size... thread it... build a fuxture to hold the part and turn it around and make the welll for the switch button.... part that off

Now make the button... do the post first then part it off, flip it and face off the bottom...

Now ya need some half inch delrin... make the switch bushing...

And start polishing!

Yeah...... I think I'll make myself 3 tomorrow. Sounds simple.

 

[disarstar]

Think that are the tanks and
sure they want the duty and see the bill


in best case i can pay the postman directly
in worst case i have to go to them
but everything will be ok, 19% on the Top if my order is under 150€
the real problems can start at >150

 

[Chief Thunder]

Zen~ I have to tell you that the Standard that I took to the local vape meet was the hit of the party. The poor thing had so many other peoples drip tips on it that it felt like a sl*t and needed a bath when she got home.

Are you calling me a future "hose bag" for using msemma's zen


Sent using Vaping Signals

 

[Landlord]

You can build one on a Mini lathe in about 5 hours.... not including polishing

It's easy....

Start with 5/8 Aluminum... Chuck it up... Bore out the battery area... Set the change gears for threading it.... do the inside thread... face off the end.... turn the OD.... part it off... turn it around and face it off... set that aside...

Pop some 3/4" stock in and turn the OD of the center post, then the O-ring grooves... then core it out... face it off... turn it around and face the other side... in a drill press drill the wick, filler and ground screw hole... tap that...

Now pop in your 5/8 stock, bore out the cap, face it off, part it off and turn it around to chamfer the top... face offf the top...

You're almost done...

Next... make the switch... 5/8 stock... bore it... turn the major thread size... thread it... build a fuxture to hold the part and turn it around and make the welll for the switch button.... part that off

Now make the button... do the post first then part it off, flip it and face off the bottom...

Now ya need some half inch delrin... make the switch bushing...

And start polishing!

Funny thing is being a machine operator for the last umteen years, this description was like a video playing in my head. LOL

 

[JENerationX]

Zen~ I have to tell you that the Standard that I took to the local vape meet was the hit of the party. The poor thing had so many other peoples drip tips on it that it felt like a sl*t and needed a bath when she got home.

EDIT: Everyone Loved the Vape!!!!!

SO.... she was gang vaped?


Sorry..... HAD TO!

 

[Pooladdict247]

You can build one on a Mini lathe in about 5 hours.... not including polishing

It's easy....

Start with 5/8 Aluminum... Chuck it up... Bore out the battery area... Set the change gears for threading it.... do the inside thread... face off the end.... turn the OD.... part it off... turn it around and face it off... set that aside...

Pop some 3/4" stock in and turn the OD of the center post, then the O-ring grooves... then core it out... face it off... turn it around and face the other side... in a drill press drill the wick, filler and ground screw hole... tap that...

Now pop in your 5/8 stock, bore out the cap, face it off, part it off and turn it around to chamfer the top... face offf the top...

You're almost done...

Next... make the switch... 5/8 stock... bore it... turn the major thread size... thread it... build a fuxture to hold the part and turn it around and make the welll for the switch button.... part that off

Now make the button... do the post first then part it off, flip it and face off the bottom...

Now ya need some half inch delrin... make the switch bushing...

And start polishing!

Wow I couldnt get to the print button fast enough!
You make it sound really easy but I guess when you build a few thousand of them, you can do it in your sleep
Thanx Zen! Im gonna order some 7068 T6 series aluminum tomarrow!

 

[Chief Thunder]

Yeah...... I think I'll make myself 3 tomorrow. Sounds simple.

The "jenna~" is well on its way. I got first dibs


Sent using Vaping Signal

 

[Landlord]

SO.... she was gang vaped?

hahah sounds like it!

 

[Zen~]

Your work flatters yourself. I'm just reporting facts. I don't know if I'm imaging it, but this device seems to slightly out perform my other Zens~ . The tolerances on the button and cap are superior.

It's hand fitted.

Even better glad it's the best of both worlds, I never hear anyone talk about dripping in here before

Well, there's not a whole lot of point in dripping once you can have the exact same performance from a tankful!

I haven't had the opportunity to gutter hop for quite awhile. This is more like me....I like it here.

What come's from the gutter shall return to the gutter... we are ALL gutter-dwellers at the real heart of the matter... some get out for a while... like Bill Clinton... others escape entirely... Like... ummm... Well... OK.... my theory needs some work... but I digress

 

[Katz123]

OMG, that was hilariouus!!!!! Too funny!!! I laughed so hard I scared the cat again.. Good thin I iod not have a mouth full again!!!!

SO.... she was gang vaped?


Sorry..... HAD TO!

 

[adrianb10]

Zen

do you need to register for the transferable warranty on your products
Thanks

PS
Who is gingi ?

 

[JENerationX]

OMG, that was hilariouus!!!!! Too funny!!! I laughed so hard I scared the cat again.. Good thin I iod not have a mouth full again!!!!

Sorry, but she was kinda asking for it.

 

[Fox5]

 

[Chief Thunder]

I thought she was getting vaped hard and put up wet


Sent using Vaping Signals

 

[Katz123]

She as in the Standard or me the one who wrote the post??? What ever it was, that was a great come back Jen!!!!

Sorry, but she was kinda asking for it.

 

[Zen~]

Zen

do you need to register for the transferable warranty on your products
Thanks

PS
Who is gingi ?

Go to the Vape meet in the UK later this month... you'll meet him.