How many people???

[Wraith504]

anything below .16 for me there is really no flavor left for an enjoyable vape.

 

[invisiblehand13]

THE LOWEST coil I've ever vaped is a .7 ohm coil on Efest 3100 mH 20 mpa sitting on a Nemesis clone.

But, I am an Electronics tech and I repair schtuff all day that released its magic smoke.


I don't see the point of running that low. but I'm not a cloud chaser and until I bought this mod I thought the Mechanic folks were professional Russian Roulette'ers.

Life gets easy once you get old and no long give a rats petuety what others think.


Build your coils....Vape your Vape.

Agreed, although being only 29 I find myself susceptible to criticism lol

 

[Fuzzy Bruce]

I do not have the equipment to go much below .7 but I do enjoy this range.

 

[invisiblehand13]

Sub ohm is awesome. Sub ohm gave me the best vaping experience I ever tried. I still use one variable device for when I have to go places where I cannot pull out a mech mod and blow vapor like a locomotive, but otherwise only dripping sub ohm. Depend on the mood anywhere from .9 to .2 dripping is king for me.

Agreed on sweet spot if we are talking single battery mech mods, but my parallel box mods have made my mechs dusty... lol and venturing down is always more exciting (within certain boundaries)

 

[Norrin]

I did state that you hadn't said what you are running, your still breaking the continuous rating which I would never do for several reasons but your build isn't as stupid as you want people to think.

 

[WillyZee]

Well...put it this way, {Moderated}lol, that being said I myself can get through a 30ml within 2 days or less (depending on chain vaping or trying to outdo customers in mini cloud comps lol

I make my own ADVs, therefore good quality juice costs me next to nothing ... however, I'm not sure I would want to go through 30ml in 2 days.

seems like a lot to me.

 

[invisiblehand13]

Just out of curiosity, what does a .06 build look like and what does it run on?

Well I do not have any pics, but they are generally on dual parallel battery box mods (mechanical) with nichrome 80 (it has 20% less resistance than kanthal so it is easier to get lower ohms out of it) in either 20 or 22 gauge with four wraps (dual coils btw) also this may just be my speculation but I do believe that royal wire is really just nichrome 80 (IMO) and nichrome 80 is my go to wire for pretty much everything these days

 

[Wraith504]

I use ss 316l for my sub builds. It has lower resistance than both kanthal and nichrome.

 

[invisiblehand13]

I did state that you hadn't said what you are running, your still breaking the continuous rating which I would never do for several reasons but your build isn't as stupid as you want people to think.

Well, if you refer to some previous postings I am really just repeating what has been previously stated by others, I will admit the sarcasm in this posting title was thick....lol

 

[Kevin littell]

Well I do not have any pics, but they are generally on dual parallel battery box mods (mechanical) with nichrome 80 (it has 20% less resistance than kanthal so it is easier to get lower ohms out of it) in either 20 or 22 gauge with four wraps (dual coils btw) also this may just be my speculation but I do believe that royal wire is really just nichrome 80 (IMO) and nichrome 80 is my go to wire for pretty much everything these days

I prefer the Nichrome 80 myself....Dont have to preheat!!! ;>)

 

[invisiblehand13]

I use ss 316l for my sub builds. It has lower resistance than both kanthal and nichrome.

316l??? What is this you speak of and where do I find it??? If it has lower resistance my gears are already turning lol

 

[invisiblehand13]

I prefer the Nichrome 80 myself....Dont have to preheat!!! ;>)

Couple that with how pliable it is, it is so smooth to wrap, people who do not know its not kanthal watch me build with it and remark on how good I am lol (if they only knew)

 

[Wraith504]

316l??? What is this you speak of and where do I find it??? If it has lower resistance my gears are already turning lol

You brick and mortars probably call it Gplat. But its really stainless steel wire that you were sold because you believed the hype just like the batteries that you sell as 35 amp continous!

 

[invisiblehand13]

I do not have the equipment to go much below .7 but I do enjoy this range.

So what do you run on? And what is your go to battery (I am assuming you are on a mech mod?)

 

[invisiblehand13]

You brick and mortars probably call it Gplat. But its really stainless steel wire that you were sold because you believed the hype just like the batteries that you sell as 35 amp continous!

Bah!!! I have heard good and bad about gplat so I am undecided, its just so expensive man and I do not specify if the amp limit on the battery is cont. or pulse when I sell them so if I do a build for someone I look at the battery (if I didnt know what it was previously) and just build within the stated limit so even if it is pulse I do not end up with a law suit. What does scare me is the kids who take it home and do their own and bring them in to show off to me. I had this kid bring me in a twisted 22 gauge reading at a .04!!!! I wouldnt let him leave until he let me rebuild it lol, but that is just the one that sticks out the most, alot of kids do stuff like that man

 

[invisiblehand13]

If you can conduct this with respect and if the posters will, this thread will not end the way the last one did.

No name calling will be tolerated. Respectful debate is welcome.

Thank you

But the last post was soooo much fun...jk jk

 

[Wraith504]

Bah!!! I have heard good and bad about gplat so I am undecided, its just so expensive man and I do not specify if the amp limit on the battery is cont. or pulse when I sell them so if I do a build for someone I look at the battery (if I didnt know what it was previously) and just build within the stated limit so even if it is pulse I do not end up with a law suit. What does scare me is the kids who take it home and do their own and bring them in to show off to me. I had this kid bring me in a twisted 22 gauge reading at a .04!!!! I wouldnt let him leave until he let me rebuild it lol, but that is just the one that sticks out the most, alot of kids do stuff like that man

Yes Gplat is expensive because it is packaged and branded. But it has been tested and it is Stainless Steel wire. 316L / 317L which is readily available at a cheap cost.

 

[invisiblehand13]

Sub ohm is awesome. Sub ohm gave me the best vaping experience I ever tried. I still use one variable device for when I have to go places where I cannot pull out a mech mod and blow vapor like a locomotive, but otherwise only dripping sub ohm. Depend on the mood anywhere from .9 to .2 dripping is king for me.

Agreed if we are speaking about a mech mod, what do you run and what are your go to batteries?

 

[invisiblehand13]

Yes Gplat is expensive because it is packaged and branded. But it has been tested and it is Stainless Steel wire. 316L / 317L which is readily available at a cheap cost.

Ebay? I think yes lol, unless you have a more reliable source...

 

[Kevin littell]

Bah!!! I have heard good and bad about gplat so I am undecided, its just so expensive man and I do not specify if the amp limit on the battery is cont. or pulse when I sell them so if I do a build for someone I look at the battery (if I didnt know what it was previously) and just build within the stated limit so even if it is pulse I do not end up with a law suit. What does scare me is the kids who take it home and do their own and bring them in to show off to me. I had this kid bring me in a twisted 22 gauge reading at a .04!!!! I wouldnt let him leave until he let me rebuild it lol, but that is just the one that sticks out the most, alot of kids do stuff like that man

And THATS the reason this forum and those that frequent it get all sphincteree when folks talk about such low ohm builds. I've seen several other new posters brag about .2 builds but don't know why their Mod top or bottom cap is glowing.....