Second V2 started shorting the pos post, no visible tubing in the hole so I cut 1/4 inch of 2mm teflon tubing, pressed it over the wire and down into the hole. Temp fix but it is working again.
How to fix a leaking Line, Complete Disassembly and fix
- Thread starter Scubabatdan
- Start date
- th_trl_thread_readers 0
-
- Tags
- madvapes
- Status
The one I have that broke, I was also noticing the PTFE tubing dropping down and getting closer and closer to the holes. Definitely going to replace mine when I pull it apart!
Any of you guys have found a stronger 510 connection or know where to buy ? im thinking about changing my lines connection and been thinking abotu using the boge cartos connections but i doubt they are any stronger.
roxxette, I am going to use a CE2 connection... if it will press in OK. I have no idea if it is stronger, but I hope so... and hopefully it never gets tested 
Had a hard time finding a connector that fits, regular 510 atty connecter was too loose, ce2 too big, finally found one in my junk box but don't know what it came off, it was longer and had a mini O ring and I had to cut it to make it shorter.
Last edited:
Well that is not good news. That mini o-ring indicates it came from some sort of clear cartomizer of some sort ... most likely...
Line #270 up and running again with new posts, new ptfe, and new 510 connecter. Long post is now the positive. 8 wraps 32 kanthal 3ohms.
Correct..... 18 gauge half hard silver wire and 18 gauge ptfe
And I would recommend making the positive post the taller one.
Last edited:
Has anyone found a replacement 510 connecter that fits the line? I had a hard time finding one, ended up using one that had a little oring, I think it came off a ce2, had to modify it cutting off the part with the oring. This connecter has side air hole and makes the line sit higher.
Last edited:
Still no luck but theres a guy in the UK that started offering repair services , im gonna ask him what/where he get the conector plus he say he have 2 types , one is the same used in original design and the other a "much" stronger one.
Sent from my iPad using Tapatalk
Connector: http://www.madvapes.com/510-Atomizer-Connector-Silver_p_3710.html
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
finally read through all 12 pages...again..lol
i have a different problem...i need to replace the poly...i bought one off the classies and they neglected to tell me that the tube was horrible in it..they had left some nasty liquid in it that turned to tube into a mess
any idea what tube to use in these or where to get it?
or if Jolly wants to do another repair for me??..lmao
i got a bottle of Boba's here with your name on it..lol
i have a different problem...i need to replace the poly...i bought one off the classies and they neglected to tell me that the tube was horrible in it..they had left some nasty liquid in it that turned to tube into a mess
any idea what tube to use in these or where to get it?
or if Jolly wants to do another repair for me??..lmao
i got a bottle of Boba's here with your name on it..lol
Hi!
my Line is leaking from the bottom because when i put it upright and the tank is half full, it leaks, bad. so i had dissembled it but doesnt want to risk breaking the bottom connector, so i left it intact. my question is, can i just apply silicone without taking out the bottom connector and the tank? As in wiping silicone at the bottom of the tank? will it seal the leak?
thanks in advance...
my Line is leaking from the bottom because when i put it upright and the tank is half full, it leaks, bad. so i had dissembled it but doesnt want to risk breaking the bottom connector, so i left it intact. my question is, can i just apply silicone without taking out the bottom connector and the tank? As in wiping silicone at the bottom of the tank? will it seal the leak?
thanks in advance...
- Status
Similar threads
