I want to Build a Mod

[Kingbtheone]

any fellow ECF modders wanna help me get going in the mod world? i understand all basics in wiring, was gonna order a madvapes 5v kit to start it off but sold out. any recommendations? yes i understand this will be addicting, I NEED a hobby, and vaping is my world. I see radio shack is a popular supplier? any suggestions will be appreciated!

 

[crk0756]

Might start out with a dual mod.... 14500's in a 3AA battery box are pretty simple.....

the radshack also has 4x2x1 project boxes and 2AA battery boxes which I used to build an 14500 evercool mod.. not too advanced if you follow BigBlue's instructions, and TI will ship you a chip as a "sample" for free.....

 

[crk0756]

And yes, this will be addicting.....

 

[AttyPops]

Other solution... look at the parts list and order parts separately. Unregulated 3.7 v (easiest), Regulated 5v (easier) or vv (bit harder) depending on comfort level.

Welcome to MadVapes LLC, RS or mouser or digikey

You can scrounge old/dead batteries for connectors, and RS for parts for the easy 3.7 volt nicostick if you want to avoid mail order. Another reason never to throw any parts out

 

[Kingbtheone]

got a connector off a fried ego battery, usb cable, tube, gonna pick up a switch and see what happens!

i do want to build a 5v dual 14500 mod box...

 

[Addicted2Vap]

you could also look into making a tekk mod. regulated 5 volts + a powered usb port to charge a phone/ipod or even run a PT. it's a fairly simple modification as well.

 

[Gummy Bear]

First things first:
Start here http://www.e-cigarette-forum.com/forum/modders-forum/192284-dear-gummy.html#post3316758

Then if you still want to get into this at least you will have been warned.

And just in case,,,, it's a free clinic. We're here for you.

 

[emus]

MV VV regulator kit makes a cheap high performance mod.
Altoids tin makes an excellent box.
I recommend using a fuse.