Depending on your setup, you can just hold your button and let the wick catch on fire, and let the flame dejuice your wick. Then use a different flavor. Thats what i do. I like fire.
Sent from my SCH-I605 using Tapatalk 2
IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?
- Thread starter markophonic
- Start date
- th_trl_thread_readers 0
- Status
Depending on your setup, you can just hold your button and let the wick catch on fire, and let the flame dejuice your wick. Then use a different flavor. Thats what i do. I like fire.
Sent from my SCH-I605 using Tapatalk 2
sounds easy enough, a friend of mine is on his way to pick us both up a pair of igo-l from a local vape store here, cant wait to set it up tonight
Have you tried clouds of vapor dot com? My friend just picked one up this morning.
I was able to find one at a local vape shop here luckily, last one too
Have you tried clouds of vapor dot com? My friend just picked one up this morning.
I was able to find one at a local vape shop here luckily, last one too
Awesome.. It's a little spendy though. Not sure if I'll bite, but it's in stock! Thanks!
adelene, are the threads chewed up on the connector or is it free spinning?
Free spinning. It never gets tight. Haven't thoroughly examined the threads though.
I don't think I worded that so you could understand my thoughts. With the IGO off of your PV, turn it upside down and see if you can free spin the post with your fingers.
It seems that the post is slipping in the bushing. It could be because the bushing is shot, or the threads are chewed up so that when you try to screw it down it grabs and spins the connector. Maybe a moot point as either cause isn't readily repairable without the proper supplies.
It seems that the post is slipping in the bushing. It could be because the bushing is shot, or the threads are chewed up so that when you try to screw it down it grabs and spins the connector. Maybe a moot point as either cause isn't readily repairable without the proper supplies.
Just have to say this thing is amazing. I was really close to completely drift away from RBA's since I had troubles with my AGA-T. But man...
Stock air hole was alittle tight so I drilled a 1.6mm. This thing produces really big clouds. I had it set to 0.8 ohms just recently and I wish I had this before. I would've save so much from not buying cartos, tanks, etc.
Stock air hole was alittle tight so I drilled a 1.6mm. This thing produces really big clouds. I had it set to 0.8 ohms just recently and I wish I had this before. I would've save so much from not buying cartos, tanks, etc.
Nah there's just something weird going on with the threading.
It won't screw down on the evic anymore, it just spins. I can lift it straight out of the threading.
Screws down on the vmax but won't fire (ohms too low? no idea).
Screws down on the bolt but not far enough. Won't make contact to fire.
Screws down and works fine on the ProVari.
LOL. Talk about strange.
Just got my IGO-L... Love it! Definitely for any stealth Vapist out there! Mine works best with Hybrid Wick (mesh/silica). Easy to change, just pull out the silica and slip a new one right back in and your good to go. Definitely looking at purchasing another.
sorry for the double post (i hate doing it) but pictures would help if you can take a good macro shot. seems very odd
That looks nice, one of these days I'll try doing another hybrid wick again. Last one I did didnt wick as good, kept getting dry hits after just couple puffs even after 5-10 drops in there :/ might just be with the coil wrapping we'll see. How do you slide a new silica wick in there? Using a needle?
All I can say about the vmax is that the ohms is probably low, had the same problem with my zmax mini but ended up putting it on my mech...
Wow that wick set up looks flawless... Looks good on the Gus as well! Btw what ohms are you hitting it at with that?
Looks nice, but you've got an awfully strange view of "stealth vaping" compared to most
- Status
Similar threads
- Locked
