IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?
- Thread starter markophonic
- Start date
- th_trl_thread_readers 0
- Status
IGO-L Pluid soaked fogger... wrapped ss mesh around high quality silica.. Works awesome!
I got mine just 2 days ago. Being my first rba i thought it would take a while to make something decent, but somehow i managed to make a good setup on my first try. 2.1 ohms on 3.5mm silica wick.
Of course, if my nervous shacky hands could make a good setup, i should be able to make an even better setup without that "new toy" excitement, right? Well, i did, and it's a little beast, really happy with it.
Here's a first in this thread, i think:
Of course, if my nervous shacky hands could make a good setup, i should be able to make an even better setup without that "new toy" excitement, right? Well, i did, and it's a little beast, really happy with it.
Here's a first in this thread, i think:
@Mimo.. Good work! Give an A7 rebuildable at try next! They are awesome and dont cost an arm and a leg. the iglo-L and A7 are great little devices.
I've heard better things of the Rainbow V3 than the A7, but that's all subjective i guess 
I also like the IGO-S, and looking forward to know more of the upcoming Euforia.
Damn, this RBA stuff is too addictive
I also like the IGO-S, and looking forward to know more of the upcoming Euforia.
Damn, this RBA stuff is too addictive
That Euforia looks great! Damn you, I've got a new one I want.
I have the Rainbow V3 and the A7. I like both equally. The A7 is bottom feeder friendly, I think it's the most affordable of the bottom feeding RBAs out there. I don't have such a feeder MOD so I don't use it a lot as it tends to "leak". I like it's adjustable post. Rainbow is super nice, looks great on an EGO. Vape is very good.
I have the Rainbow V3 and the A7. I like both equally. The A7 is bottom feeder friendly, I think it's the most affordable of the bottom feeding RBAs out there. I don't have such a feeder MOD so I don't use it a lot as it tends to "leak". I like it's adjustable post. Rainbow is super nice, looks great on an EGO. Vape is very good.
A7 bottom feeder is great because the air is sucked straight up and focused right on the coil.... I dont know what Euforia and rainbow 3 are but will go look....
From the looks of rainbow 3, I'd take an A7 because it has juice well and airflow is focused on coil.
Euforia looks like an oddy clone.... havent had much luck with personally but lots of folks love em.
For >$20 give an A7 from empire a try... you wont regret it.
http://www.e-cigarette-forum.com/fo...030-wick-materials-safe-vs-dangerous-431.html
Look at post 4309
Euforia looks like an oddy clone.... havent had much luck with personally but lots of folks love em.
For >$20 give an A7 from empire a try... you wont regret it.
http://www.e-cigarette-forum.com/fo...030-wick-materials-safe-vs-dangerous-431.html
Look at post 4309
Last edited:
Just got an Igo-S in. Very nice little dripper. Makes for a tiny fog machine!
Damn, I'm digging the mini iGo-L
i've tried doing this and my pin doesn't seem to budge at all, is there something i'm doing wrong?
I just got my Igo L and MAN OH MAN this thing is 10x better than the Phoenix and I LOVE the phoenix. I really like this IGO L. I think they have fixed the o ring problem my cap is TIGHT and is not coming off i have to pry it off. The airhole is very easy to align and It's even easier IMO to build a coil on than the phoenix. I built a 1.5ohm coil and installed it in less than 3 minutes. I love this thing! Very stoked to the others I have on order as well as the IGO S (minis). Great product highly recommended
I got mine today too! I wrapped 1.2ohm coil on a cotton wick, so I haven't actually vaped on it yet..
Gotta let it soak!I got my coil together quickly, but it took me a few tries to get the coil attached to the posts!! That was an adventure. I figured it out eventually. I'm really excited to see how this thing performs. I'll check back in tomorrow.. Thanks for bumping the thread!
I've been running an A7 for dripping, but I have the feeling this will be far superior -- digging the sealed post and the nice wide juice well!
I was amazed at how easily this was to setup. It seemed without the holes in the post it would be harder than my phoenix. but from the time it took me to open the package, wrap a coil, and fill it with juice to getting my first vape off of it, it was less than 5 minutes. This thing is BY FAR my favorite RBA. I'm really more into dripping RBAs than i am gennys but i figure each has their own place. But for me the IGO L is my favorite atty i've ever used. I am more than pleased with it. i can put 20+ drops out of a needle bottle into this thing and take a fair amount of rips off of it, really really happy!
I got mine today too! I wrapped 1.2ohm coil on a cotton wick, so I haven't actually vaped on it yet..
I got my coil together quickly, but it took me a few tries to get the coil attached to the posts!! That was an adventure. I figured it out eventually. I'm really excited to see how this thing performs. I'll check back in tomorrow.. Thanks for bumping the thread!
I've been running an A7 for dripping, but I have the feeling this will be far superior -- digging the sealed post and the nice wide juice well!
My first impressions when I got mine: IGO-L RBA with Hybrid wick - First Impressions - YouTube I skipped right to a hybrid wick so I could still dry burn the coil.
A quick view of my all SS wick and coil that I have been using since a week after the hybrid video was shot. Same wick and coil is in it today, super fast rinse and clean for new flavor samples. IGO-L SS Wick - YouTube
Had to to order a few these to match my agat+'s. They look amazing
Sent from my SCH-I605 using Tapatalk 2
Sent from my SCH-I605 using Tapatalk 2
Well, this thing hits like a champ! I'm impressed with the build for the price, and the amount of liquid it holds for a dripper.
Plus it looks pretty darn snazzy with the hourglass drip tip!!
Plus it looks pretty darn snazzy with the hourglass drip tip!!
- Status
Similar threads
- Locked
