IkenVape Help Center

[warlike36]

Also, I did e-mail cs because I have a problem with an order. I was shorted some fusions I ordered but obviously can't prove that. Do you think they will honor it?

Isaac is the best, I may have a man crush on him...lol...just playin Isaac.. If you were honestly shorted, Isaac will make it right. Please don't take offense to that, its just Isaac is such a nice guy, some do try to take advantage. In NO WAY am I saying you are Mookie

 

[evilfrog]

Well, had an i06 die. Those silhouette drip tips are just murder! I tried heating it up first, but the poor i06 still came apart. Down to one 3.5Ohm now. Why couldn't this happen to one of the 1.8ohm? Arg.
I don't think I'm going to use the silhouette on my remaining io6s until I ream out it's insides a little. Anyone have a good method to do this? Should I just use some sandpaper or a file?

Other then my failure to properly remove drip tips, I've had a great time with these attys. I never thought I'd be a dripper until I tried IKV gear. Simply a beautiful vape.
But tomorrow all my attys get to rest when the mega fusions arrive

 

[ukeman]

evil,
1. you can get a black delrin i06 d/t... they are pretty loose; because they are too narrow inside, you can just slide it off and drip right on the wick, put it back on and vape.
2. rig up what was posted a while ago... snip the black delrin on the mouth end, turn it over and slide it on the barrel that has a little teflon tape on it, then slide a 510 d/t on that.
3. get a gratefulvapers.com ss i06 sleeve. it works like a charm!

Well, had an i06 die. Those silhouette drip tips are just murder! I tried heating it up first, but the poor i06 still came apart. Down to one 3.5Ohm now. Why couldn't this happen to one of the 1.8ohm? Arg.
I don't think I'm going to use the silhouette on my remaining io6s until I ream out it's insides a little. Anyone have a good method to do this? Should I just use some sandpaper or a file?

Other then my failure to properly remove drip tips, I've had a great time with these attys. I never thought I'd be a dripper until I tried IKV gear. Simply a beautiful vape.
But tomorrow all my attys get to rest when the mega fusions arrive

 

[evilfrog]

Yeah I have a couple of the delrin ones. They actually work ok for me - I just blow a tiny bit into them if I can't hear the sizzle after dripping. And sometimes I use a needle tipped bottle that usually gets the liquid past the choke point. I got the Silhouette so I could tell the different Ohm attys apart. A small dot from a silver sharpie is what I'm using now.

I probably will pick up a sleeve at some point, or just wait for the DCA.

 

[Electricnut]

Just got the sleeve and it solves the problem.

 

[Zag]

Didn't work out for me. I had sent him several emails then pm's here when I had a problem. Got one response that he was replacing a doa atty but never received anything. Now i am back to no response. Just figured he would get back to me when he had time but it has been a while now. gave up.

 

[Switched]

Not defending Isaac here but he receives in the vacinity of 75-100 emails a day, not to mention as many orders. Often one will fall in the cracks. Email him again you will be looked after.

 

[loft]

Not defending Isaac here but he receives in the vacinity of 75-100 emails a day, not to mention as many orders. Often one will fall in the cracks. Email him again you will be looked after.

Agreeing with Switcher here. Isaac isn't the type to ignore people and he may have honestly missed it. I know he spent a couple hours last night catching up on emails too.

 

[markfm]

I'd give him another shot, he's been catching up on something, been in contact with me on an order error. It took a while for him to chase down what happened, a burp in processing.

 

[Mookie]

Shout out for great cs! I had a problem with an order and sent an e-mail. Isaac didn't even question me about it. He quickly e-mailed me and fixed the problem. Thanks so much!

 

[Zag]

I am sure he is very busy. He has some great products. I might send him another but it's been 3 emails and 4 pm's. Totally understand stuff falling through the cracks. I run a biz too but don't have to deal with the quantity of comunication he does.
I had ordered 2 1.5 atty's that came highly recommended. the first one measured 2.2 and lasted 3 days and the other was doa. I only mentioned the doa atty in my messages. After not getting a response through the emails I pm'd him here and he responding saying he was putting another one in the mail. That was 3-4 weeks ago. Since then I have sent 3 pm's and haven't gotten a response.
I know from reading these posts and from others who have dealt with him that my situation is not typical. He is pretty on top of things.

Not defending Isaac here but he receives in the vacinity of 75-100 emails a day, not to mention as many orders. Often one will fall in the cracks. Email him again you will be looked after.

 

[ukeman]

Not that Zag doesn't get it... but Isaac's business is the kind that one little widget is the same as a dozen widgets... sometimes i order 1 atomizer... multiply that by dozens of orders, it's hard to keep track of for him i would imagine.
I've had an order or two in a couple years that he missed responding and then if he does catch it he goes all out to call you or get you straightened out ... and then some.
Good thing he rarely misses with his product.

I am sure he is very busy. He has some great products. I might send him another but it's been 3 emails and 4 pm's. Totally understand stuff falling through the cracks. I run a biz too but don't have to deal with the quantity of comunication he does.
I had ordered 2 1.5 atty's that came highly recommended. the first one measured 2.2 and lasted 3 days and the other was doa. I only mentioned the doa atty in my messages. After not getting a response through the emails I pm'd him here and he responding saying he was putting another one in the mail. That was 3-4 weeks ago. Since then I have sent 3 pm's and haven't gotten a response.
I know from reading these posts and from others who have dealt with him that my situation is not typical. He is pretty on top of things.

 

[Zag]

gave it another shot. sent a pm and message through the site.

 

[asingh20]

I am sure he is very busy. He has some great products. I might send him another but it's been 3 emails and 4 pm's. Totally understand stuff falling through the cracks. I run a biz too but don't have to deal with the quantity of comunication he does.
I had ordered 2 1.5 atty's that came highly recommended. the first one measured 2.2 and lasted 3 days and the other was doa. I only mentioned the doa atty in my messages. After not getting a response through the emails I pm'd him here and he responding saying he was putting another one in the mail. That was 3-4 weeks ago. Since then I have sent 3 pm's and haven't gotten a response.
I know from reading these posts and from others who have dealt with him that my situation is not typical. He is pretty on top of things.

Try him on twitter. Responds to all my inquiries.

 

[Switched]

I am sure he is very busy. He has some great products. I might send him another but it's been 3 emails and 4 pm's. Totally understand stuff falling through the cracks. I run a biz too but don't have to deal with the quantity of comunication he does.
I had ordered 2 1.5 atty's that came highly recommended. the first one measured 2.2 and lasted 3 days and the other was doa. I only mentioned the doa atty in my messages. After not getting a response through the emails I pm'd him here and he responding saying he was putting another one in the mail. That was 3-4 weeks ago. Since then I have sent 3 pm's and haven't gotten a response.
I know from reading these posts and from others who have dealt with him that my situation is not typical. He is pretty on top of things.

You don't happen to live around the St Andreas fault do you good buddy? It seems you have fallen in a big crack. Like other s have sais skype or tweet him.

 

[Zag]

You don't happen to live around the St Andreas fault do you good buddy? It seems you have fallen in a big crack. Like other s have sais skype or tweet him.

not too far from it. I pm'd him here and sent a message thru the ikenvape website. don't want to appear like I am stalking. lol. Duplicating all the messages on twitter and skype is a little too much work imo.
I'll wait a few days to see if he responds

 

[Zag]

No dice for me. It's been almost a month and a half since My first message. I know he is known for great service and I am sure he is busy but I think I give up now.

 

[Iken]

Hey Zag, I have been scouring my inbox but couldn't find anything?
Heading over to the Pm box right now. I'm sorry for the delay!

 

[Iken]

Ouch 73 private messages. I'm trying to get myself back on routine with the forum, but from letting go of my packer it's been next to impossible to keep the eight arms accurate I'm sorry guys

 

[Iken]

Hey Zag,
Ok I got your order number thanks allot for including it. I definitely didn't get any emails from your registered address though.
I was actually waiting on you to let me know which atty was defective. Please let me know and you'll have a tracking number with your name on it today