IkenVape New design
- Thread starter Iken
- Start date
- th_trl_thread_readers 0
- Status
Damn buddy, I'm sorry to hear about your friend, and I will pray for you and his family.
....This may be a bad time to say this but your sight is looking damn sexy....
Css is a great way to work with web-sights fast too....you could also use Java Script as well to help fine tune the sight. Java Script is faster than regular HTML... and is great for manually fine tuning almost any section of the sight..... the only down side is it takes forever to learn how to use it.... took me almost a month just to get half way decent with it...Edit:... I checked out your source codes on your sight, they look really good.... all you really have left to do is a little bit of alignment to do.
I think I still have the book for HTML if you want it just let me know.... I have no use for it.
Last edited:
all the best Iken...
review of a few of the Ikenvape 2.0 LR's.
I have been searching for a slightly cooler vape than the 1.5 LRs offer so of course I went to Iken site.
I got LR 2.0: 901's, 801's, 510's...
I use 3.7v mods only; both 14500 and 18650 batts.
Haven't tried the 801's yet.
the 901 is a little too cool... I have used 1.9 901's and those are better imo; not too hot but not too cool.
But the reason for this post: the 510:
YES!!!!
for my Reo Mini; Absolutely Incredibly the finest so far!!! i an so glad i got a few of these babies!
btw, i find the 18650 batts to require slightly higher resistance than what the 14500's do.
So for now, i am using a TW 510 (2.1-2.2 Ohm), but will try the Iken LR 2.0 510 as well (later).
review of a few of the Ikenvape 2.0 LR's.
I have been searching for a slightly cooler vape than the 1.5 LRs offer so of course I went to Iken site.
I got LR 2.0: 901's, 801's, 510's...
I use 3.7v mods only; both 14500 and 18650 batts.
Haven't tried the 801's yet.
the 901 is a little too cool... I have used 1.9 901's and those are better imo; not too hot but not too cool.
But the reason for this post: the 510:
YES!!!!
for my Reo Mini; Absolutely Incredibly the finest so far!!! i an so glad i got a few of these babies!
btw, i find the 18650 batts to require slightly higher resistance than what the 14500's do.
So for now, i am using a TW 510 (2.1-2.2 Ohm), but will try the Iken LR 2.0 510 as well (later).
So sorry Isaac. Hang in there, and keep your chin up. Each day we are given is a gift, a gift we can not waste.
Remember the good times, the laughs and the friendship for without it you never would have known what true friendship is like. And to have had it, even for what feels like a short time is a special gift!
Remember the good times, the laughs and the friendship for without it you never would have known what true friendship is like. And to have had it, even for what feels like a short time is a special gift!
Dang Isaac I'm sorry my friend. I can relate, most of my friends are gone. I hope and pray the family will find peace. You need and remember to take care of yourself this once and put yourself before us.
Thank you so much guys. I have to admit it, I tried to stay away from this thread a bit. Bad habit, Death is probably my biggest fear and really makes me want to run away. I'm sorry my thanks hasn't come sooner. Really, Thank you.
I'm really sorry John,truth be told he was the last of the old group and was the 1st as we grew up together.Tough times and tough choices we make in this life. The family is fine really, they never met him. We chose separate paths years ago as I left the group to settle down and get life in order, he just continued on and things kept getting more consequential. Thank you my friend.
Ok...let's continue as time keeps progressing.
What do you guys think of the site now? Any more suggestions of modifications?
I'm really sorry John,truth be told he was the last of the old group and was the 1st as we grew up together.Tough times and tough choices we make in this life. The family is fine really, they never met him. We chose separate paths years ago as I left the group to settle down and get life in order, he just continued on and things kept getting more consequential. Thank you my friend.
Ok...let's continue as time keeps progressing.
What do you guys think of the site now? Any more suggestions of modifications?
I love the new background.... your sight is really looking good. Oh if you want the HTML book just let me know, I really have no use for it and it has a lot of great information. Plus I may have a few practice text files left over on a USB drive, including Css text from a few of the chapters from that book. HTML is a good way to manually adjust or create an entire functional web sight from scratch. Plus the book may give you some ideas you didn't think of yet.
Just let me know buddy, you helped me out finding the best hardware available for ecigs its the least i can do for ya.
I love the new background.... your sight is really looking good. Oh if you want the HTML book just let me know, I really have no use for it and it has a lot of great information. Plus I may have a few practice text files left over on a USB drive, including Css text from a few of the chapters from that book. HTML is a good way to manually adjust or create an entire functional web sight from scratch. Plus the book may give you some ideas you didn't think of yet.
Just let me know buddy, you helped me out finding the best hardware available for ecigs its the least i can do for ya.
Aw Thanks alot Grimmer! It's ok though, I was always good at the hands-on. The only books that I can really get into need to be written by the late Robert Jordan and Terry Goodkind
Thank you on the site too! I'm still working on it. As we speak. Finally got the borders to match up, now just need to make them both curved. It's been a good ride so far, let's just say if photobucket were to crash I'd be in trouble!
lol yea don't lose photobucket.... I noticed (looking at your source code on your page) you are using Css to link your pages .... very good idea... Keeps things clean and easy to troubleshoot. Yea your borders are looking really good now.... looks like your getting a hang of this.... it wont be long now you can do web page designing as a side job...
Isaac just finished my video review of my new Phidias and felt it only proper to state over and over that for my fave PV the only attys I use are Iken's I will be doing a review of your LR306 n LR510's in the next couple days so keep your eyes open. I will try and do them justice.
Haha Photobucket was a no-go, it made the store seem unsecure. I'm still stuck on on the information and sections bar thoughlol yea don't lose photobucket.... I noticed (looking at your source code on your page) you are using Css to link your pages .... very good idea... Keeps things clean and easy to troubleshoot. Yea your borders are looking really good now.... looks like your getting a hang of this.... it wont be long now you can do web page designing as a side job...
been at that one for days.Ahh you made the video already??? I just read your message before hopping the forum. I'll look it up right a way! Thank you!
Ahh Dean Koontz is Val all the way.She started tapping into another author of whom I cannot tell you
I can tell you that she read the 550page book in a sitting of 4 hours.
Haha Photobucket was a no-go, it made the store seem unsecure. I'm still stuck on on the information and sections bar though
Do you mean at the bottom of your page where you are having problems? Everything else on your page is almost perfect.... I noticed the alignment shifted a little uneven from the right of the page to the left of the page.... but its hardly even noticeable... I just pay to close attention to details and I remembered that from viewing the page closely from before. Honestly there is no need to change that even if you decide to throw in another border.... which you could do to compensate for the alignment.
Edit:
At the bottom of the page there seems to be an over lap of a couple of codes..... which may be why its showing the Commerce: .... hmmmmm maybe linking a JPG or placing a border will help?
Last edited:
Ugh I know, I straightened out before, but had to reset the entire theme in an attempt to get the Sections and Information tabs white. There's something stopping it. Firebug is an Amazing tool, but somehow it's not matching up with Corecommerce's tools. Ugh another late nighter on this thing. Oddly enough, I'm a bit of a perfectionist in a way. Anything crooked will never escape my mind till it's straightened out.
I just placed an order at the site. It's looking excellent, you've made a lot of progress with it Mr. Perfectionist
I fooled around a bit filling and emptying the cart, logging in and out etc. All functioned flawlessly and snappily
I fooled around a bit filling and emptying the cart, logging in and out etc. All functioned flawlessly and snappily
Thank you kindly! Loving the new avatar! It looks great!
Haha one can only try to be, Thank you very much for the indepth web search! That was really relieving to know. Some places, I cannot access unless I'm buying something and that thought has been excruciating!I just placed an order at the site. It's looking excellent, you've made a lot of progress with it Mr. Perfectionist
I fooled around a bit filling and emptying the cart, logging in and out etc. All functioned flawlessly and snappily
- Status
Similar threads
- Locked
- Locked
