Indulgence Mt-Rta

[MMW]

You're sure? I had resistance issues with the rba not making constant contact with the 510 pin in the base of the STM. The rba pin gets loose .
The pin is only threaded into the deck by catching two threads on the positive post. Any more and it doesn't make contact. Any less and it's too loose giving resistance fluctuations.

 

[zipflint]

Do you mean the base on the TFV4 has issues? Because I've been having really irritating leaking issues with mine.

I've already changed out the o-ring that is on the bottom of the single coil RBA section. But even this new one likes to bunch up and deform when screwed in to the base. I always have to fix it with some random flathead screwdriver prodding. So now it doesn't just pee EVERYTHING out the air holes after filling.

BUT. I think there's a problem with the little o-ring on the top-cap part of the chimney, because even when it's screwed in real tight and that o-ring LOOKS fine, if I fill the $(#!ing thing past that o-ring, it starts to leak again.

REALLY chapping my hide, because now that I've got a good build in the thing, it's a flavor monster!

At least I've got the Mutank worked out. I've re-wicked it the same way twice now with no leaking and it's been great on my Reuleaux rx200!

Nah the base has issues!

 

[MMW]

Sorry The subtank mini.

 

[haleysdadda]

oops

 

[haleysdadda]

You're sure? I had resistance issues with the rba not making constant contact with the 510 pin in the base of the STM. The rba pin gets loose .
The pin is only threaded into the deck by catching two threads on the positive post. Any more and it doesn't make contact. Any less and it's too loose giving resistance fluctuations.

Yep positively! Bought a second STM when I started having problems with the first & another RBA too! New bottom works perfectly with all decks & coils old bottom not!

 

[dshuld]

Ej, did u ever get the sample of their other rta?

 

[roxynoodle]

Yeah, try not to call my Boreas ugly I admit I went for a very plain look because its a larger tank. Merlin is spiffier

To my surprise at least half my mods can fit a 25mm tank with no overhang, including my petite ipv d2. Which makes me think 25mm is the future for big air and dual coil. It even fits great on my old Sig 50Ws.

 

[suprtrkr]

Having invented a new juice flavor-- I can't decide if I will call it MintMelon or WaterMint or perhaps Extreme Zombie Apocalypse Elixir With Sick Cloud, Bra-- I wanted a simple, clean tasting dripper build for testing purposes. It near to broke my heart, but I ripped the fused Clapton build out of the Wotofo Sapor and replaced it with a 9/8 wrap, 3mm, .55Ω dualie build in 28ga SS316. It should pump 27-34 watts on the Wotofo Phantom:

 

[ej1024]

Ej, did u ever get the sample of their other rta?

On its way bro...


Vape On[emoji100]

 

[dshuld]

On its way bro...


Vape On[emoji100]

Cool...curious how it stacks up to the mu. One day I'll have a vape budget again lol.

 

[ej1024]

Cool...curious how it stacks up to the mu. One day I'll have a vape budget again lol.

I'm very curious how the clear chamber will hold up to the heat of the coils... [emoji848]


Vape On[emoji100]

 

[dshuld]

I would think itd be ok. When I run my fishbone the coils are pretty close to the glass with no issue other then to hot to touch at times.

 

[ej1024]

I like the fact that it doesn't have a juice control... Just like the Mtanks


Vape On[emoji100]

 

[haleysdadda]

Does anyone know where I can get alien or fused clapton wire for TC?

 

[roxynoodle]

You could make fused. I haven't seen that flat ribbon in anything but kanthal.

 

[suprtrkr]

I've never seen any, Bill.

 

[haleysdadda]

I've never seen any, Bill.

i can't believe with all the TC devices somebody hasn't made some ss at least!

 

[suprtrkr]

i can't believe with all the TC devices somebody hasn't made some ss at least!

I have seen SS clapton wire, but not fused or aliens

 

[dshuld]

You could make fused. I haven't seen that flat ribbon in anything but kanthal.

Lightning vapes has nicr in ribbon.

 

[ej1024]

Finally found me a velocity deck for the MTANK, time to fused this deck...


Vape On[emoji100]