Infinity Users

[Liv2Ski]

Got mine today. I am really digging the light weight small profile and good looks of this unit. But I do have a question. How many who have it have found themselves pushing the dial instead of the button? Man pushing the dial results in a less than stellar vape! But when I do find the button it hits like Mike Tyson

 

[5cardstud]

You'll get used to it. I still push the LED on my Buzz every once in a while.

 

[Liv2Ski]

Thanks 5CS and I was just testing voltage output w/DMM and noticed that we have a cute blue LED onboard. Can't really see it when you are vaping so I did not notice it till just now. Cool

 

[PoliticallyIncorrect]

I've never pushed the dial—so far. But like 5CS, the blind feel of my Buzz's button is a lot like the LED. I keep thinking I'll push it inside one of these days.

 

[VanderVape]

So does it have a strong TH? I don't like a big TH. Makes me cough. Does that sepend at the voltage that is set?

 

[PoliticallyIncorrect]

So does it have a strong TH? I don't like a big TH. Makes me cough. Does that sepend at the voltage that is set?

Yes—to an extent. It's a power source. The rest of the vaping equation is up to you.

 

[VanderVape]

Including the attys. Im vaping oba oba 8mg, on an ego with a regular 510 atty. If I breathe in just right sometimes I will get a kick in the back of my throat that kinda burns and I don't like it.

 

[cuseguy]

Well VV, you can set the Infinity to it's lowest setting at around 3.3V and it will be very close to your Ego's voltage, but I can venture to say that very few of us are running ours at 3.3! You could always use a higher resistance atty/carto, which will cut down TH to a degree.

 

[BuzzKill]

Including the attys. Im vaping oba oba 8mg, on an ego with a regular 510 atty. If I breathe in just right sometimes I will get a kick in the back of my throat that kinda burns and I don't like it.

That is probably because it is getting dry ! , with the ∞ just lower the dial to 3-4 and wala GONE ! no heavy TH

 

[VanderVape]

I was hoping to vape at a higher volt. I love the vapor I get, and honestly guys if the eGo works and im not going to be able to vape any higher then why buy one. Mind you I love the way it looks. I have seen many pics and they are beautiful.
And yeah it was getting a little dry. Lol I keep forgetting that.

 

[Bovinia]

Shell it also depends a lot on your juice. I hate a heavy TH too but I couldn't go back to lower voltage vaping. Start out at 4v or a little lower at first to get used to it. My normal range now is 4.2 to about 4.5, but when I first got my Buzz I had to get used to it You might want to try out some of Vapor Renu's juices...they are well known to have a very mild TH.

I haven't tried to vape with the dial but I do mash my LED bubble a lot!

 

[VanderVape]

Ok I am really going to think about it, usually vaping oba oba, ry5, and vanilla tahity. Of course I do have my other flavors. Lol oh and I run between 8mg and 12. I was floored when I got back up to that. 6 just wasn't cutting it.

 

[Wharf Rat]

Never the dial ~ sometimes the LED

 

[Bovinia]

I think you'll be fine Shell, the higher voltage will bring out your flavors better too, you'll be surprised at how much better they taste. I vape around 12mg too.

 

[BuzzKill]

Ok I am really going to think about it, usually vaping oba oba, ry5, and vanilla tahity. Of course I do have my other flavors. Lol oh and I run between 8mg and 12. I was floored when I got back up to that. 6 just wasn't cutting it.

Vander changing the voltage WILL change the taste of the juices , you can also try a slightly higher ohms atty 3.3 or so and this will cool it a bit but have more flavor, I use 901 for flavor and 510 for TH they ARE different .

 

[Liv2Ski]

Vander changing the voltage WILL change the taste of the juices , you can also try a slightly higher ohms atty 3.3 or so and this will cool it a bit but have more flavor, I use 901 for flavor and 510 for TH they ARE different .

Could also try an 801. Those atty's are so big and long that they produce nice flavor and a cooler vape. I am partial to the Cisco 2.0 ohm when I run the 801's

 

[VanderVape]

Im sorry guys for being such a pita, I have asked and contemplated so much on these and other threads. With it being my first vv device I have to make sure it will work for me and not end up being a waste of money. Im one of those people that things usually have to be modified, or I have to just deal with it, so I over really examine things.

I haven't tried 901s or 801s. We have been on the 510s and I have been just trying the different cartos and what not trying to get a handle on what best works for me. I know I like the cartos and Kat likes the atties, so as you can imagine it can get a bit expensive at times. Now with just been trying to find my be all end all carto.
I still have sinus issues. Always have and always will there's just no getting around it. Plus wyoming is crazy windy. So I need something that I can dial in to where I can really taste my juices, but not the TH.

Thanks guys for answering my questions and putting up with me.

I forgot to mention I need something that is a little wider. I have fibromyalgia and when my hands cramp up it can make using an ego painful some days.

 

[PoliticallyIncorrect]

If width is an issue, the VVPV might work out better for you.

 

[VanderVape]

That is what I am thinking. I wish the Buzz had a dial on it.

 

[cuseguy]

VV, the size issue aside, like Buzz said, a high Resistance atty/ carto will give you the ability to enjoy high voltage without the TH. Joye sells HV attys that have resistance of 4.3-5.5 ohms and it cools the vape down tremendously, while enhancing the flavor. There must be a carto like that.