Innokin iClear 30, am I missing something?

[DonMac]

I have two iclear 30's. An older one and a newer one. Both work perfectly and produce clouds of vapor with no issues whatsoever. My only complaint is the non-replaceable mouthpiece. Some of my friends also have them without issues.
The iclear 30 is a large dual coil device with lots of liquid and requires specific handling to perform well. You can't stick this kind of tank on a small ego battery and expect it to work properly.
Many of the complaints voiced here are from inexperienced vapors with a device they don't understand properly. Excessive juice consumption, gurgling, consistent leaking when filled are all symptoms of improper understanding and use of the product. Metallic taste may be caused by the metal mouthpiece reacting with the vapor of certain liquid blends. Leaking may be caused by overfilling. juice consumption should twice as much as a single coil and is normal. Gurgling and so forth are caused by leaking, insufficient voltage to properly atomize the liquid, and similar issues.
There is no magic to these devices, and used properly most will perform as they are supposed to; if used improperly they will perform poorly.

 

[Garemlin]

If anyone is really in love with the iClear 30 I have three that I am getting ready to put in classifieds.

Two iClear 30 - One never used and the other filled and used once
One iClear 30s filled and used once

 

[Xaviour]

Chainvapor, my thoughts exactly. My only issue is the tight draw. Like sucking a golf ball through a garden hose. Coming from a pt2m this is a big change. Any way to loosen itup some?

 

[garyoa1]

In a word... boiling. They do seem to gunk up after a while and need to be boiled for a while to restore the draw. Still my favs. On the other hand, if you like airy, the new itaste 30 x.1 is really airy like a kanger. Bottom coil. Not a fan.

 

[Twendt]

I like my iclear30 I got with my mvp overall, vapor is a little less then I expected but taste is awesome on both flavors of juice I've tried. Any ideas on how to get more vapor? I have tried it all the way from 8 watts up to 10 and vapor production does not amaze me. But I'm new, I've only had it 4 days. But from the videos I've seen they get alot more vapor than I do

Sent from my SM-N900T using Tapatalk

 

[garyoa1]

Most of the vids you see they take multiple hits at once so it builds up a bit. That being said, in most of my juices I use 100% VG and pretty much obliterate anything in front of me when I take a hit.

 

[muth]

Just got an mvp2. Came w/iclear30. Baffled by this clearomizer. Filled it just under the 3ml full mark with Genuine#22, a 100% VG juice.
This juice is not thick and it's quite light in color. It works just fine using my old ego tank. But I just poured a mother load of juice in this
thing and I would like to use it. I usually keep my settings on 4v/8w.

Can anybody help me with this? I get nothing from the iclear 30!

 

[muth]

What does ur first sentence mean? I'm new to this.

 

[Traijan]

Yup, I'm having trouble with the iclear 30 that came with my MVP2. I've vaped about 3/4 of a tank through it now and it's got the tightest draw on it off all my tanks, I absolutely love the drip tip but it's dam near impossible to vape straight to lung with it. Don't want to throw it away as I've said I love the drip tip a lot.

But my main problem is that I can't seem to find a good voltage or wattage to use with it. It's either too light on the vapor and flavor or tastesburnt, doesn't seem to be any Inbetween for my I clear 30 any recommendations?

 

[PaulBHC]

If you take it apart and look at the bottom of the coil head, you can see the air hole in the bottom of the pin. That is where the air goes through. You are not going to get an airy draw off of it.

8 to 9 watts seems to work for me with 50/50 liquid.

When the liquid gets low you need to tilt to keep the liquid in contact with the top of the wicks.

 

[K24A3]

Not sure if this was mentioned but the iClear30S performs way better than the standard iCrear 30 imo.

They put an extra wick at the top of the coil on the removable part which seems to cause vapor production problems, pull the top off and remove the wick, problem solved.

 

[PaulBHC]

High VG 60-75, long slow draws, stop firing before I stop my draw, 8 or higher watts, no beauty ring, gives me good clouds and flavor. Clean top cap and rubber cap on coil at each refill.

 

[diceman1000]

i hate mine that came with my MVP...