Innokin U-can modded to Full Mechanical Hybrid Mod

Status
Not open for further replies.

TheRem

Senior Member
ECF Veteran
Mar 3, 2012
210
329
Philippines
Just sharing, this is not my mod... [FONT=lucida grande, tahoma, verdana, arial, sans-serif]EYNDYEL DM of Pinoy Vaper's Forum did this amazing conversion. :)[/FONT]

554024_587139647972520_2105525073_n.jpg


198937_250938651711957_632228981_n.jpg
 

LouEyez

Super Member
ECF Veteran
Verified Member
Jan 28, 2013
425
418
Geneva
So, sorry if this seems thick, but basically, here is what I would have to do to make one...please tell me if this is correct:

1) make sure that battery sits off the bottom, but that the center screw on the button touches the battery when said button is pressed.
2) make 2 holes on the top with screws, the middle one being insulated so as not to make contact with the body...that middle one needs to be in contact with the top (positive) of the battery
3) drill out the cap to fit a drip tip

Am I missing anything?

Thanks,

L
 

jasl90

Ultra Member
ECF Veteran
Verified Member
Jan 30, 2012
1,688
1,754
Jacksonville, FL
So, sorry if this seems thick, but basically, here is what I would have to do to make one...please tell me if this is correct:

1) make sure that battery sits off the bottom, but that the center screw on the button touches the battery when said button is pressed.
2) make 2 holes on the top with screws, the middle one being insulated so as not to make contact with the body...that middle one needs to be in contact with the top (positive) of the battery
3) drill out the cap to fit a drip tip

Am I missing anything?

Thanks,

L

Nope... Sounds like you got the gist of it. :D
 
Status
Not open for further replies.

Users who are viewing this thread