Introducing Sgt VV (Army Tank) - Variable Volt Bottom Feeder

Status
Not open for further replies.

ukeman

PV Masher
Supporting Member
ECF Veteran
Verified Member
Aug 22, 2010
7,718
5,129
Kauai, Hawaii
great... i'm off to look for a ss liquinator....!
what Ohm DC do you like the most?

i hear the most important thing is to get a tank that doesn't leak... any probs that way?

CE2s I have dubbed "failomizers". I'll never by another product made by royalsmokers again until they refund me all the money I have spent on all 5 different revisions before I gave up. Really hate them.

As far as the liquinators, I have 2 plastic ones and one SS one: all 3ml versions. Yes, they keep a carto wet, and thats what makes them fantastic. The reason I love the dual coils is because they won't burn juice. When you slot a carto and stick it in a tank, even the non dual coils won't burn. Really surprised me how well they work, and how functional almost all brands of cartos become once you have a tank. They are very functional, but no cartomizer on the market compares to a great performing atty with either dripping or bottomfeeding.

As far as juice goes, almost all my mixes are a variation on a few different tobacco flavors. I DIY mix all my stuff, and use the money I save towards mods 8) DK tab is my favorite flavoring of choice, and I mix 2 30 ml bottles a week of it (wifey vapes it also).
My Recipe:
40/60 PG/VG 36mg nic base
8% DK tab flavoring
1 drop Tobacco Extract too 30ml

For dual coil cartos, I'll actually drop the nic level down to 16 or so. Since I vape them at around 5.2 or 5.3: they HIT LIKE A TRUCK. So even though you loose Throat Hit because of the lower nic, you get the same TH just by cranking the volts up. The dual coils I use are from that initial batch I bought from smoke tech months ago. I was so blown away after the first one I tried, I bought 200 of them. Little over halfway through my stash now. I might add that the clear ones I have tried jack up the flavor somehow imho. I prefer the steel ones.
 

Stownz

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2010
2,027
563
Guthrie, OK
great... i'm off to look for a ss liquinator....!
what Ohm DC do you like the most?

i hear the most important thing is to get a tank that doesn't leak... any probs that way?

Nope, no leaks on these.
1.5 ohm dcs are what I use because I want steel. All the other ohm ranges I have seen are clear.
 

mwa102464

Resting In Peace
ECF Veteran
Oct 14, 2009
14,447
12,564
Outside of the Philadelphia Burbs, NJ & Fla
Nope, no leaks on these.
1.5 ohm dcs are what I use because I want steel. All the other ohm ranges I have seen are clear.

I have 50 SS 2ohm DC cartos I got right from Smoktech so they make ss ones too in other ohms than just 1.5 just so you know Stownz. I also have the man making me one of his new units and I've wanted one of these Mods since the day I saw it, looking forward to this. I prefer the 2ohm DC's at the higher voltages above 4.4V they dont get quite as hot it seems to me as the 1.5 does but the 1.5 I like better from 3.4v-4.3v

I use the add 2v-2.2v trick for my ohm ratings to match stuff up, so if I'm buying a 1.5ohm I will probably be using 3.5V-3.7V 2ohm then its 4v-4.2v usually this gets me close with Attys and cartos, but with the DC Cartos you can absolutely push that envelop a bit.
 
Last edited:

Stownz

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2010
2,027
563
Guthrie, OK
I have 50 SS 2ohm DC cartos I got right from Smoktech so they make ss ones too in other ohms than just 1.5 just so you know Stownz. I also have the man making me one of his new units and I've wanted one of these Mods since the day I saw it, looking forward to this. I prefer the 2ohm DC's at the higher voltages above 4.4V they dont get quite as hot it seems to me as the 1.5 does but the 1.5 I like better from 3.4v-4.3v

I use the add 2v-2.2v trick for my ohm ratings to match stuff up, so if I'm buying a 1.5ohm I will probably be using 3.5V-3.7V 2ohm then its 4v-4.2v usually this gets me close with Attys and cartos, but with the DC Cartos you can absolutely push that envelop a bit.

Ah, good to know about the 2.0 ohm DCs in SS. Problem is I still have over 150 of the 1.5 ohm ones, hahahaha
Picture97.jpg

If they would just blow up faster or something, lol, they last too long.

Oh, and hurry and mail those scubas 8) Worked out rather well. You get a bad ... VV Army tank with switching reg, and J is gonna sell me one of the scubas soon as he gets them from you.
 

hairball

ECF Guru
ECF Veteran
Verified Member
Sep 17, 2010
13,110
7,459
Other Places
Hey Stownz, MWA, are there different lengths of DC's? like reg and XL ? what is the size that fits the liquinator ?

Regular dc's will fit the 5ml liquinator (you can use them in a 3ml but stick out quite a bit). The 3ml one takes Boge. The XL and XXL are fatter in diameter but same length.
 

ukeman

PV Masher
Supporting Member
ECF Veteran
Verified Member
Aug 22, 2010
7,718
5,129
Kauai, Hawaii
thanks hair.... what carto do you like with the liquinator? i ordered a 3ml one.... any suggestions?
Regular dc's will fit the 5ml liquinator (you can use them in a 3ml but stick out quite a bit). The 3ml one takes Boge. The XL and XXL are fatter in diameter but same length.
 

eastman

Ultra Member
ECF Veteran
Verified Member
May 10, 2011
1,038
690
48
richmond, va
I just wanted to sell to get the newer version. I'm a sucker for wanting to have the newest and best out there:)

The only things I would recommend after spending a few hours with this is maybe to have stronger magnets and a longer hole for the juice bottle(my thumb barely fits) Not really a problem or complaint I'm just picky.

Other than that I think this is a perfect around town mod and I would recommend it to anyone. I will give a full review in a week or 2.
 
Last edited:

ukeman

PV Masher
Supporting Member
ECF Veteran
Verified Member
Aug 22, 2010
7,718
5,129
Kauai, Hawaii
cool jif, me too...
heheh i haven't bought 14500's since... a year ago when the mini bottom feeders first came out
Just spoke to J on PM and am on the list for a version 2 with lanyard capability and white LED. Psyched. About 3 weeks away.
Just gotta buy bats now. :)
 

jmarkus

Ultra Member
ECF Veteran
Verified Member
Mar 3, 2011
1,387
1,126
53
CA USA
actually eastman...yours and every other mod in the last month or so has a hole up top on the battery box to attach a lanyard. look there, see it? now attach a lanyard to it! nice!! ok, ok...stupid suits and work people, i get it, but when your out and about on vacation or on the weekend it might be a nice option to snap one in.

thanks for the pic stownz!
P7040002.jpg


hahaha :)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread