iPV6 pioneer4you

Status
Not open for further replies.

Hairy Cannonball

Full Member
May 28, 2015
32
97
61
It doesn't matter what tcr value I use, or what temperature I select with mine. There is absolutely zero temperature regulation in tcr mode. This is a show stopper for me as well. The only thing stopping me from returning mine right now is the possibility a firmware upgrade will repair. Or I will return for the rpp recall and hope it is fixed on the new ones. I would love to hear someone with the newest release say the tcr is working fine. Here is the question in my mind. Is this a basic hardware flaw, or is it a programming issue? The sx330 is an ok chip right?
 
  • Like
Reactions: jjatl

jjatl

Super Member
ECF Veteran
Verified Member
Nov 12, 2015
472
561
Georgia
It doesn't matter what tcr value I use, or what temperature I select with mine. There is absolutely zero temperature regulation in tcr mode. This is a show stopper for me as well. The only thing stopping me from returning mine right now is the possibility a firmware upgrade will repair. Or I will return for the rpp recall and hope it is fixed on the new ones. I would love to hear someone with the newest release say the tcr is working fine. Here is the question in my mind. Is this a basic hardware flaw, or is it a programming issue? The sx330 is an ok chip right?

DJLSB said that the chip on the IPV400 was working great. He is an extremely technical reviewer, and it seems like he is a solid source for information.
 
  • Like
Reactions: MMW

jj6404

Super Member
ECF Veteran
Jan 15, 2015
945
342
VA
Yeah I feel the same way as all here except I probably won't return mine. While I'd like a working TCR, I've got the preset working for me at a semi-satisfactory level. My vendor is asking me to return for warranty exchange but asked me to send it in now and when they get more in stock they'll send me a replacement. I may go this route but I'm still deliberating if it will yield a better unit or not. Really just wish Daniel or Phil would do a review. I contacted Daniel about it with no reply... I also let Vapin Heathen know about the issues but he can't really do anything about it.

Funny tho that my vendor is calling it a warranty exchange and not a recall replacement. They mentioned nothing of the recall even tho the unit they sold me is definitely from the bad batch.

Sent from my SM-G925T using Tapatalk
 

Hairy Cannonball

Full Member
May 28, 2015
32
97
61
Maybe we could start a google document with Batch #'s and Firmware V's to start tracking our and issues?
I do not know how to create a google doc, but here is my info:

JJATL B015625 FW1.2 No Reverse polarity/TCR not working/SS316 Preset too cold

Can anyone set this up?
2 units, Both have the number B015929 under the battery door, FW1.2, No RPP/TCR NOT working/i use ss430 coils, using the SS316 preset results in almost no vapor even when set at the highest temperature, but this is using a ss430 coil and the SS316 preset.
 
Last edited:
  • Like
Reactions: jjatl

Hairy Cannonball

Full Member
May 28, 2015
32
97
61
They hid it. It is on the inside of the battery door.
Thanks. Interestingly,both my units have exactly the same number under the battery door.
14355903_1818684731736605_1143347315_n.jpg
 
  • Like
Reactions: jjatl

GeorgeS

Ultra Member
ECF Veteran
  • May 31, 2015
    2,266
    3,534
    Oregon, USA
    I contacted my vendor and they are hoping on a firmware update to fix the issues (they say much like the IPV5 required a early FW update).

    I like the size and shape so much, I'll likely keep mine and see how P4U plays this one out. Still VERY SURPRISED that the IPV6X got out the door in this condition.
     
    • Like
    Reactions: jjatl

    Wingsfan0310

    Ultra Member
    ECF Veteran
    Oct 2, 2013
    2,366
    3,202
    Flat Rock, MI, USA
    DJLSB said that the chip on the IPV400 was working great. He is an extremely technical reviewer, and it seems like he is a solid source for information.
    From the my memory he prefers SS316. If he just tried the preset maybe it was working ok. Unless he specifically tried the TCR mode there is no way of knowing if his worked.

    I like him as a reviewer, but he's not perfect. He also seems to have companies he's harder on and one's he softer on.

    In the end I trust my own experiences more than what any YouTube reviewer says.

    PS I wouldn't hold my breath waiting for P4Y to release a firmware update if the past is any indication. They are already working on the IPV7. I long ago quit buying their mods (after the IPV3 Li and their decision not to release a firmware update for SS TC).

    Cheers,
    Steve
     
    • Like
    Reactions: KenD

    jjatl

    Super Member
    ECF Veteran
    Verified Member
    Nov 12, 2015
    472
    561
    Georgia
    From the my memory he prefers SS316. If he just tried the preset maybe it was working ok. Unless he specifically tried the TCR mode there is no way of knowing if

    The IPV400 has a SS304 preset and not one for SS316. He specifically tested the TCR and found that .00115 gave the most accurate temperatures for SS316.

    I agree with the remainder of your post, but I am hopeful that they do put out an update to fix these issues.
     

    Wingsfan0310

    Ultra Member
    ECF Veteran
    Oct 2, 2013
    2,366
    3,202
    Flat Rock, MI, USA
    The IPV400 has a SS304 preset and not one for SS316. He specifically tested the TCR and found that .00115 gave the most accurate temperatures for SS316.

    I agree with the remainder of your post, but I am hopeful that they do put out an update to fix these issues.
    My bad, I don't own the mod. I just assumed it would have a SS316 preset since that's the most popular SS in vaping.

    That TCR is pretty far off though, it should be .00092 iirc. That's even higher than SS304.

    Cheers,
    Steve
     

    z00te

    Full Member
    Sep 2, 2013
    21
    4
    United States
    Yes there's some issues wit a whole list of
    debit cards, or PayPal).


    Our mailing address for returns is:

    iPV North American Warranty Center
    4 McLaren, Suite #C
    Irvine, CA 92618-2816

    ATTENTION iPV 3, iPV 4, iPV 400, iPV 6X, & SXmini Q Class OWNERS:

    When using the manufacturer-issued charger for two battery units that allow charging in the unit, the batteries MUST have the same level of charge, be the same brand, and should usually be batteries that were purchased together WITHOUT prior use and charged together. Failing to follow these steps could result in serious damage to your mod and could cause serious personal injury! KMG, Pioneer4You, and YiHi are not responsible for any damages or injuries that result in misuse of the charger or the unit!
     

    z00te

    Full Member
    Sep 2, 2013
    21
    4
    United States
    Nothing about a recall on the web..copy,paste and send if u have it


    The following is the warranty information regarding Pioneer4You and YiHi SXmini devices sold into North America. For all other brands please contact your seller directly. If KMG is your seller for any other brand, please contact Service@KMG-Import.com with a detailed description of your issue and your proof of purchase or feel free to call our Service Center directly at 949-916-8860.

    WHOLESALERS AND RETAILERS PLEASE CONTACT OUR SERVICE CENTER DIRECTLY AT Service@KMG-Import.com or 949-916-8860

    KMG Imports, LLC, (DBA KMG Wholesales) provides limited warranty support for all Pioneer4You iPV products sold in the United States and Canada.

    This warranty does cover manufacturer’s defects in workmanship and/or materials. This warranty is valid from the date of purchase for a total period of six months, orthree months depending on your model, with original receipt. If the product fails due to a manufacturer’s defect, and is still within the warranty period from the date of purchase, we will gladly repair or replace the product for you at no charge for the repair and/or replacement services.

    This warranty does NOT cover atomizers, batteries, chargers, drip tips, or any other accessories on the device itself. The warranty does not cover misuse or improper maintenance, including but not limited to: water damage, juice damage, unauthorized modification or customization of the original device, accidental loss of or damage to the device and/or its internal components. Stripped threads and damage to the finish of the product are also not covered in the warranty.

    PLEASE NOTE: The cost of shipping the device TO AND FROM our returns center are NOT covered, and is the sole expense of the customer BOTH ways. It is recommended to use a shipping service such as USPS Priority Mail, FedEx, or UPS that provide a tracking number and delivery confirmation to ensure the shipment’s safe delivery. KMG is not responsible for any lost packages, mis-labeled addresses, or any other logistic issues due to shipping.

    Include the following documents along with your unit or we will not be able to process you repair/return:

    (1) Copy of your purchase receipt or invoice from your original purchase.
    (2) After completing the Customer Information Form below you will receive a Return Authorization email. Please add the email Service@KMG-Import.com to your trusted email addresses so that it is not rejected by your spam filter. Also, please print the RMA form you receive and include it with your return.
    (3) A return shipping label pre-purchased by the customer to be used to ship back the return either through USPS Priority Mail, FedEx, or UPS. This label should be addressed to the customer’s address and sent from the KMG returns address provided below. Failure to provide a label will result in being contacted with a request for shipping payment. Default return shipping method is USPS Priority shipping. A $7 fee will be billed via PayPal invoice to cover materials and shipping cost, (which can be paid with credit cards,
     

    jjatl

    Super Member
    ECF Veteran
    Verified Member
    Nov 12, 2015
    472
    561
    Georgia
    I figured out how to create and share a google doc. Please let me know if this works and if you think this is a good idea:

    docs.google.com/spreadsheets/d/1XaZctMcVFv9-tPfeCmNKDC66h7f1kf9iwaFyI4yt040/edit?usp=sharing



    @Hairy Cannonball , @jj6404 , @Kayvin M , @GeorgeS ,
    Please update the spreadsheet with the data for your devices
     
    Last edited:

    Priggster

    Full Member
    Verified Member
    Jun 10, 2012
    46
    37
    Berlin
    Hi @jjatl,

    you can add my stuff to spread sheet as well if you want.

    Batch#: W155932
    Firmware: V1.2
    RPP: no
    TCR working: no, only tested SS316L (0.00092) btw. It doesn't do anything!
    TC preset: accurate?, I dont really know, but at least it's works somehow.
    Button lock working: no
    other: works great in Wattage mode so far :) and I won't send it back since living in Germany..
     
    • Like
    Reactions: jjatl

    jjatl

    Super Member
    ECF Veteran
    Verified Member
    Nov 12, 2015
    472
    561
    Georgia
    Hi @jjatl,

    you can add my stuff to spread sheet as well if you want.

    Batch#: W155932
    Firmware: V1.2
    RPP: no
    TCR working: no, only tested SS316L (0.00092) btw. It doesn't do anything!
    TC preset: accurate?, I dont really know, but at least it's works somehow.
    Button lock working: no
    other: works great in Wattage mode so far :) and I won't send it back since living in Germany..

    Added! Thanks!
     

    Hairy Cannonball

    Full Member
    May 28, 2015
    32
    97
    61
    I figured out how to create and share a google doc. Please let me know if this works and if you think this is a good idea:

    docs.google.com/spreadsheets/d/1XaZctMcVFv9-tPfeCmNKDC66h7f1kf9iwaFyI4yt040/edit?usp=sharing



    @Hairy Cannonball , @jj6404 , @Kayvin M , @GeorgeS ,
    Please update the spreadsheet with the data for your devices

    I built 316 coils for my Goon to try out the TC preset. It temperature regulates but is cold. I need to set the temperature about 100 degrees F higher than my other mods for the same vape. The Button lock does not function. Both of mine behave the same way.
     
    • Like
    Reactions: jjatl
    Status
    Not open for further replies.

    Users who are viewing this thread