Ithaka new rebuildable part
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Sounds like you are referring to the "upper connection nut", right?
I thought he was speaking the the extension ring?
like here (listed as Odysseus tank Extension (Full Mode)): http://ggwiki.et.com.mx/index.php/File:OdysseusExpansionSet.jpg
I hear ya Imeo. Just not sure what to do with the insides that I might not use after getting the upgraded insides.
Chris
Originally Posted by itshak
just to be sure : The ithaka telescopic mp?
There is no other telescopic,but the rebuildble part of ody and old one of ithaka are the same thread and size?
But they are not in stock??
And they are not on the list of Items to made??
just to be sure : The ithaka telescopic mp?
There is no other telescopic,but the rebuildble part of ody and old one of ithaka are the same thread and size?
But they are not in stock??
And they are not on the list of Items to made??
I hope you will be holding them then. I have been wanting one of these as well since I missed the last 2 batches
If you miss this one, you have to organize a raid to Itshak, because I heard that he'll take 16 of them for soldiers in his chessboard
Last edited:
If you miss this one, you have to organize a raid to Itshak, because I heard that he'll take 16 of them for soldiers in his chessboard
Steliosss buddy stop worrie the guys,at this stage I can a sure all
My powns are full armed Ithakas 8 on first line with 8 SS window on 8 SS JGG's
That I will take parts off to make them 8 stealth.
So there you go,you know how my first line of Imeo banner will look
Stealth SS JGG with Ithaks + SS window!!! That's will be my GG front line soldiers.
Be ready guys for...but I can't tell everything.
Now there is a place for imagination on both lines will be interesting how
How other local GG commanders will solve this one.
I think GG gallery will be very Interesting place in near future,
Because no better then GG's capabilities for such armed maneuver.
Ha ha so no worries,all other parts will come 2 by 2 like Noa Ark saving GG's from the fluded,
Maybe a bit more here and there to ease the some of the "B.D."
Lolisianis 
ha ha 
Itshak please tell me what "Lolisianis" is, I keep reading it and have no idea what you mean
It's this :
from one who don't know a word in Greek
Hate to tell you this buddy but it doesn't mean anything in Greek. Try "Lolamos" that will work better
Ok my first simple built on new Ithaka update
2mm silica sandwich in an organic cotton,to compensate on the one channel.
There is no must for it just wanted to try it.
Make a roll like and cotton longer because only cotton
Go to the channel,silica stop at the end of the atty chamber.
Then wrap with 28 kantal 3/4 wraps
After wrap I push with tiny screwdriver more cotton to coil ( very easy to do):
Cut the rest shorter then the bottom of channel like AAL explain and put e juice:
Check resistance: 0.96 ohm bam bam (it's not in Greek Lolamos captain)
Fire the device:
It's fire ok,maybe better then ok
Now I'm vaping... Boba's 12mg..
It's vaping easy...smother..like cotton...it's wick great..
The taste is Diffrent ...like cotton.
Wet vape little less TH but we can control it know
By playing with hight of the coil above center post hole.
Next time maybe try the silica only...Hmm but I don't know this sandwitch wick better.
Will see.
It's totally different atty that only share the same Tank.
I know for sure though that the old rebuildable part is a keeper
And every one will understand now that Ithaka is simply the best device out there.
If one buy only new update he miss very important aspect of vaping experience
As it's not only different built it's different vaping experience,and for me
The 2 rebuildables old and new are must have!!!
That's it for know thanks for watching guys.
Lolamos?? Ha ha I like that
2mm silica sandwich in an organic cotton,to compensate on the one channel.
There is no must for it just wanted to try it.
Make a roll like and cotton longer because only cotton
Go to the channel,silica stop at the end of the atty chamber.
Then wrap with 28 kantal 3/4 wraps
After wrap I push with tiny screwdriver more cotton to coil ( very easy to do):
Cut the rest shorter then the bottom of channel like AAL explain and put e juice:
Check resistance: 0.96 ohm bam bam (it's not in Greek Lolamos captain)
Fire the device:
It's fire ok,maybe better then ok
Now I'm vaping... Boba's 12mg..
It's vaping easy...smother..like cotton...it's wick great..
The taste is Diffrent ...like cotton.
Wet vape little less TH but we can control it know
By playing with hight of the coil above center post hole.
Next time maybe try the silica only...Hmm but I don't know this sandwitch wick better.
Will see.
It's totally different atty that only share the same Tank.
I know for sure though that the old rebuildable part is a keeper
And every one will understand now that Ithaka is simply the best device out there.
If one buy only new update he miss very important aspect of vaping experience
As it's not only different built it's different vaping experience,and for me
The 2 rebuildables old and new are must have!!!
That's it for know thanks for watching guys.
Lolamos?? Ha ha I like that
Last edited:
Itshak if you have a problem with juice feeding (getting burnt taste) then cut the tails of your wick so they don't go down the channels. Cut them flush to the top, it feeds much better
Itahak, in my build the channels are completely empty. The cotton rests on the top tip of the channels. Nice build there but I cannot see the benefit of the silica. In my opinion, the silica will hold juice that might never go to top. Juice in the core of the coil contributes to more gunk. That is why small diameter coils are cleaner. Thick coils are needed when you don't have enough feeding and u need a reservoir. Around 2 years ago when I started with Penelope I used to use 3 strands of 3mm wick at the top. It used to hold a lot of juice. But when u remove wick from channels I realized better to let juice freely come to to the coils instead of relying on wicking action and a reservoir. It takes time to balance dry hits and flooding but it is cleaner taste and doesn't gunk up as much
Great advice,but know it wick just fine.
Maybe because only the cotton goes in channel,and
I kept it airy not stuffed a lot like AAL recommended less is more.
So it's wick ok but it's wet.
I'm missing the little dryness of the silica only setup, that come in the end of the vape.
Because of the dryness it's look the silica provide more flavore.
But maybe it's because what I'm use to.
It's like food in a way it's take time to change habit or include a new type.
So I don't want to close head on this yet.
For only silica I do what you recommended and cut the wick at the start of the channel
I can see why,after we got use to 4 channels.
And I think I try also higher resistence 1.2 ohm or 1.5ohm
Because I do prefer long easy draws.
Maybe because only the cotton goes in channel,and
I kept it airy not stuffed a lot like AAL recommended less is more.
So it's wick ok but it's wet.
I'm missing the little dryness of the silica only setup, that come in the end of the vape.
Because of the dryness it's look the silica provide more flavore.
But maybe it's because what I'm use to.
It's like food in a way it's take time to change habit or include a new type.
So I don't want to close head on this yet.
For only silica I do what you recommended and cut the wick at the start of the channel
I can see why,after we got use to 4 channels.
And I think I try also higher resistence 1.2 ohm or 1.5ohm
Because I do prefer long easy draws.
Ok.
Then next time I'll make one smaller diameter coil
And staff cotton inside.
I don't know why but the cotton make the vape dens and wet heavy like.
It's should be like so?
Less analog like?
- Status
Similar threads
