Its woodvil time

[Marvin & Sennie]

I thought sub ohming was out for the Woodville' s? I'm vaping 1.6 now and I'm used to .6 dual coil. I don't want to take chances with my wood' s though because I was able to get mine only because I was paid the balance for a wedding this summer otherwise I'd just be drooling at all yours, so I REALLY don't want to mess these up at all... so what is the safety line?

 

[thinkingaboutit]

I'm staying safe personally. Not to mention my twisted 32 ga 1.2 ohm coil hits like Bruce Lee after you make fun of his mom.

 

[maf2k8]

Well i finally got my 2 Woodvils. They are VERY nice without a doubt! but to be honest i don't think Reos are for me or suit my style of vaping.

I am not sure if i just prefer more voltage or lower ohms or what it is. I have tried about 5 different builds with 2 different gauge wires and even though i get good flavor and good amounts of vapor, I just really need more kick (i guess the word is)

i never really researched the Woodvil line, The mechanical ones with the sub ohm kit coming out later this month might be more for me. It really sucks cause these are really nice mods but i have been building all night long and haven't found 1 build ( using a cyclone ) that gives me that vape i like from my mech mods or dna mods.

By no means is it the Reos fault, I guess i just need/demand more power/lower ohms.

To the classifieds they go!! If anyone missed out, Here is your chance to get one! I ll sell them for a little less then what i paid.

When the new mechanical/sub ohm ones come out, I am for sure getting one without a doubt!

 

[ltrainer]

I thought sub ohming was out for the Woodville' s? I'm vaping 1.6 now and I'm used to .6 dual coil. I don't want to take chances with my wood' s though because I was able to get mine only because I was paid the balance for a wedding this summer otherwise I'd just be drooling at all yours, so I REALLY don't want to mess these up at all... so what is the safety line?

I've been vaping mine for months at 1.1 ohm.
Do you ever have nightmares where you can't find your camera and the wedding is proceeding? Or (from the old days) you can't find your film. Or somethings happened and the wedding is happening and for some reason you are having problems getting there? And the dreams go on and on and you're just freaking out, then you wake up all crazy then slowly realize it was a dream. I have. lol

 

[maf2k8]

Just a quick question.. but can a kick be used in the Woodvils? This might be a answer to what i am looking for..

 

[nerak]

Just a quick question.. but can a kick be used in the Woodvils? This might be a answer to what i am looking for..

A kick has been used with the wood REO's before.

 

[super_X_drifter]

Mailman just dropped off both my Woodvills and they are awesome!! WOW, First time owner and these are VERY impressive! Where have i been all this time and why haven't i owned one sooner?

I have a question and hopefully it doesn't take anything off topic.

I have a Vicious Ant Cyclone i am using and its really my first time building a RDA with a bottom beed on it ( though i am experienced with building RBAs-RDAs )

I was curious if anyone could post any pics of there coil setup on there Reomizers or Cyclones? Just curious as to how they coil/wick is positioned and setup.

How's those?
Here's a three part tutorial for setting up a cyclone
http://youtu.be/kNT5-s0U5jk

http://youtu.be/Sd-ZiJel-jA

http://youtu.be/BP_iwf_gTew

 

[The Ocelot]

Well i finally got my 2 Woodvils. They are VERY nice without a doubt! but to be honest i don't think Reos are for me or suit my style of vaping.

I am not sure if i just prefer more voltage or lower ohms or what it is. I have tried about 5 different builds with 2 different gauge wires and even though i get good flavor and good amounts of vapor, I just really need more kick (i guess the word is)

i never really researched the Woodvil line, The mechanical ones with the sub ohm kit coming out later this month might be more for me. It really sucks cause these are really nice mods but i have been building all night long and haven't found 1 build ( using a cyclone ) that gives me that vape i like from my mech mods or DNA mods.

By no means is it the Reos fault, I guess i just need/demand more power/lower ohms.

To the classifieds they go!! If anyone missed out, Here is your chance to get one! I ll sell them for a little less then what i paid.

When the new mechanical/sub ohm ones come out, I am for sure getting one without a doubt!

View attachment 312834
View attachment 312835

You can kick a Phidias. I have 2 and they very similar to the Woodvils and it probably would work the same. This is a Phiddie with a Kick: #20

 

[Big Hitter]

I wonder if I voided my warranty?

How a real man uses a new product .....

1) Open Box
2) Chuck instructions to the side
3) Assemble hastily with big grin on face
4) Use product for 5 minutes while grin fades
5) Void warranty and mod the shat out of it so grin returns larger than ever.

 

[nerak]

I want to put this here just in case some are having a problem with the new wood REO's and the door sticking.

Posted by Robert:

If your door is tight here is a simple fix . Take a little at a time and check to make sure you haven't removed to much wood . Make sure you hold the door at the same angle on the door

​

 

[Big Hitter]

I would like to add ^^^ that depending on humidity they will loosen or tighten.
I would not recommend sanding unless its been sticky for a few months ... Give it some time.

I put paraffin on all my door "edges" it helps a bit if they are too tight by providing lubrication of sort .... but it also helps if they are too loose by providing some extra friction ....

How is that possible you say ... I don't know but it works..... been doing it for years and its all ready applied on my new one.

 

[canoeist]

^^^^ Like Tim said, I use paraffin wax on mine too.

 

[debinnv]

So a plain white candle could be rubbed on it? That is paraffin right? I don't want to risk hurting it in any way so I figured I had better ask first.

^^^^ Like Tim said, I use paraffin wax on mine too.

 

[canoeist]

So a plain white candle could be rubbed on it? That is paraffin right? I don't want to risk hurting it in any way so I figured I had better ask first.

It will help but I am not sure it is actually paraffin wax. Paraffin wax is cheap and useful for a lot of things around the house, you can get it in the canning section at any store that has canning supplies.

 

[MasterofNone]

Good morning reoville

Sent from my iPhone using Tapatalk

 

[turbocad6]

How a real man uses a new product .....

1) Open Box
2) Chuck instructions to the side
3) Assemble hastily with big grin on face
4) Use product for 5 minutes while grin fades
5) Void warranty and mod the shat out of it so grin returns larger than ever.

ha, almost right, but I skipped steps 3 and 4 and went right onto 5 out of the box, this reo seen a vice grips and a soldering iron way before it has seen a battery, atty or any juice, never ran it stock

and I love my tight door, this one came out of the box so tight that it was stuck at first. I really want to tighten up my other one. it's buttery smooth but if I move it a bit it just drops to the floor thinking a few coats of crazy glue to build up the edges then maybe a light sanding if it gets too tight. either that or some sort of a bottom stop maybe. it's not that bad really but I like it tight

 

[jifjifjif]

Good morning reoville

Sent from my iPhone using Tapatalk

Your cubicle looks very similar to mine. The papers tacked on the walls and everything.

 

[Miarose]

Good morning reoville

Sent from my iPhone using Tapatalk

you got some good looking reos. I really like them

 

[MichelleOhio]

Finally got mine. Asked them to hold them at the PO instead of delivering. I checked tracking this morning and there were no updates since yesterday morning. So, I'm at the post office at 8:30 when they open and the woman goes to the back to check. She's gone for what seems like an eternity and the longer time went on the more I was thinking they weren't in yet. She finally walked around the corner with two priority boxes and said she had to sort through 70 boxes to find them as my carrier hadn't been in yet to sort his mail. She could have told me to pound sand and wait since the line was getting really long behind me, but she didn't. This woman was beyond helpful and I think that's rare when dealing with the USPS! Thank you, Darlene! You made a girl very happy this morning.

And, thank you ROB! I can't stop touching them.

 

[thinkingaboutit]

Just a quick question.. but can a kick be used in the Woodvils? This might be a answer to what i am looking for..

Also, look at coil positioning. Lower for more flavor, higher for more TH. Maybe you can fix your issue not with building more coils, but with placing them where they work best for you.