There's no clones yet cause the authetics aren't even out lol. Pretty sure they are waiting to get their hands on one to compare before releasing
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
JD Mods Stingray- CLONE
- Thread starter the4thpower3
- Start date
- th_trl_thread_readers 0
- Status
Hope my FT copper nemesis machining marks aren't too deep as I plan to polish.
I see angel survived, what did you brush w/; 600 grit?
I'm a little on the fence about the FT one.
But, for half the price I paid for this one... I just couldn't help myself.
This one from Venerable vaping came polished.
Also the only one I've seen with a copper switch base
And one big silver plated spring.
I brushed it with green scouring pad.
I've brushed it a few times already.
Sorry for the bad pic - this was right out of the box and my finger prints on it.
What's the transit time with fasttech now lately? I want a black anodized tube. Also do they have the nemesis switch pins?
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
I got a copper nemmy to hold me off until I do see a clone of the LE Red Copper.
Actually I ordered two. The other is waiting - Fast Tech.
This one is from Venerable Vaping (I brushed the tubes myself - it came polished).
What's that Eazy-E Eazy Duz It juice? Can I pick some of that up or is it only for Real Muthaphu@@in G's?
LoL. Ruthless - eZ dUZ iT foo! straight gangsta shiznizzle - nahm sayin yo. if you down fo da strawburry watamelon! das how we do. lmao
I gotta git me sum of Dat... Cuz da Boyz-n-the-hood are alwayz hard!
Just noticed they make the Eazy Duz It with a splash of menthol too. I think I might try that one. Eazy Duz It on Ice!
Also since it's Ruthless too bad they don't have a Bone Thugs - n - Harmony flavor (can't think of any other ruthless artists off the top of my head)
Just noticed they make the Eazy Duz It with a splash of menthol too. I think I might try that one. Eazy Duz It on Ice!
Also since it's Ruthless too bad they don't have a Bone Thugs - n - Harmony flavor (can't think of any other ruthless artists off the top of my head)
Last edited:
I just got confirmation of my inclusion in the BC Stingray group buy through the calivaper thread. So excited!
Why? There's no mystery to it. It's a plain ol copper tube with the Stingray engraving. So they make it with copper instead of brass or SS.
Transit time depends on carrier. I've been using China Post E-packet for all my latest and have been getting them in 10 days from acceptance (to VA).
I ordered the black tube set as well - ship date says 3/18.
They do not have have Nemmy switch pins (your talking about the little keyway right?).
They need some Ice Cube juice.
Mmm 10 days better when the typical 3 weeks to a month... Guess that epacket is faster then the USPS option?
Sent from my Nexus 5 using Tapatalk
They shipped my black anodized tubes in 2 days (stated 5), been 3 since and still in China. I also used the China Post option, which served me well with Desire Ecig. On a similar note, my brass stingray was also shipped 3 days early.
As for the switch pin, you can use a small coat hanger, a large paper clip, or a 5/16 brass rod (hobby store). A toothpick also works in a pinch. Good luck!
Ace has a good selection of 1 ft brass and copper rods and tubes. Look twice because not easy to find in store.
I'm a little on the fence about the FT one.
But, for half the price I paid for this one... I just couldn't help myself.
This one from Venerable Vaping came polished.
Also the only one I've seen with a copper switch base
And one big silver plated spring.
I brushed it with green scouring pad.
I've brushed it a few times already.
Sorry for the bad pic - this was right out of the box and my finger prints on it.
Does the firing pin and hot pin from other nemmies fit Venerable vaping copper nemmy?
I ask because FT $18.50 nemmy has odd ball silver plated pin threads. My other nemmies all take standard M5-0.8 bolts.
I like polished, I like copper pins, I like copper switch body, I like mix and match compatibility w/ SS hcigar.
Any peeps have opinion on best copper nemmy. Hcigar, venerable vape, etc???
Jonesing for some copper till I can find a copper ray. Black or polished Cu, don't care so long as engravings fairly deep.
I have exactly the same questions. It's probably a good thing I can't afford even the cheap FT stuff
at the moment. Better to wait and gather data.
Still collating..... <---that's a weird word when you see it typed and not spoken
at the moment. Better to wait and gather data.
Still collating..... <---that's a weird word when you see it typed and not spoken
Yes, pins swap.
That sucks the pins aren't the same om the $18.50 FT model. I just ordered one
It seems some nemmy clones are correctly threaded as 20x0.5 and some are bigger 21x0.5 (HCigar included).
That sucks the pins aren't the same om the $18.50 FT model. I just ordered one
It seems some nemmy clones are correctly threaded as 20x0.5 and some are bigger 21x0.5 (HCigar included).
Last edited:
Don't fret on the $18.50 nemmy. It is the purdyesst 18650 nemy I have. Thanks to da beauty belt. Have not polished the "polished" button yet. I was able to tune lock ring gap w/ 2013 FT nemmy 650 extension; normally I make custom M5 pins to adjust gap. I polished switch post, magnetized and did the nemmy shim. It works great. Button fits loose like all FT nemmies.
I gave my gf my stingray clone since I'm using the authentic, the brass pin in the clone worked just fine but it was short. I sacrificed one of my nemmy clones pin to use for it since it was longer, I guess for a peace of mind lol
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
- Status
Similar threads
- Locked
