JonboyUSMC's Lava Tanks

Status
Not open for further replies.

Capt.Louisville

Vaping Master
ECF Veteran
Verified Member
May 4, 2011
3,658
5,474
Louisville, KY
If you want a CE2 you order that way if you want to use a punched 510 carto you order that way . There are 2 different styles CE2 no filler 510 carto uses filler
I think the next run will be all carto tanks. These are really universal cause you can cut a piece of carto tube for the top cap & run them with ce2's. I think you'll find as soon as you use the carto setup, you'll never want to see a ce2 again.
 

Capt.Louisville

Vaping Master
ECF Veteran
Verified Member
May 4, 2011
3,658
5,474
Louisville, KY
You simply punch a hole or make a cut in the carto tube above the bottom cap. When the tank is filled, the juice simply wicks into the carto. It's simple & works great. I was not much of a carto fan, but this is different. Great taste & performance + no leaking or gurgling≥
Just so I understand fully......you can either use a CE2 or a punched carto.....am I cutting the CE2 like with my MAP or does the whole CE2 get put inside the tank? Second....what's a punched carto and where do I get em? I don't know which setup is better. Thanks for all the knowledge sharing guys. Its just that I am coming in late but I want to buy one for sure. I learn quickly, I promise.
 

floridamale

Super Member
ECF Veteran
Verified Member
Aug 3, 2010
787
240
Florida
I think the next run will be all carto tanks. These are really universal cause you can cut a piece of carto tube for the top cap & run them with ce2's. I think you'll find as soon as you use the carto setup, you'll never want to see a ce2 again.

I'll stick with the CE'2 I don't like filler
 

Capt.Louisville

Vaping Master
ECF Veteran
Verified Member
May 4, 2011
3,658
5,474
Louisville, KY
Thanks, Capn. So when I order the punched cartos style tank, the tank caps will be for a 510 carto.....and people like Boge and IKV, right?

Correct. They come with an ikv regular or dual coil xl carto (your choice). As far as punching/cutting cartos, I use a dremel with metal cut-off wheel. Takes about 2 seconds to do.
 

Pete54

Ultra Member
ECF Veteran
Verified Member
Oct 30, 2009
2,637
3,412
Clearwater, Florida
I'll stick with the CE'2 I don't like filler
I felt the same way. Been using CE2's for several months but I decided to give the carto's a spin. Now that's all I use. I did take one apart after 4 refills to see if there was any burning of the filler or inner sleeve. The filler was untouched and the sleeve had very, very minor scorch marks. Much less than when I used to use carto's without a tank. The beauty of a carto tank is that it just never leaks in any position.
 

Capt.Louisville

Vaping Master
ECF Veteran
Verified Member
May 4, 2011
3,658
5,474
Louisville, KY
I'll tell you, I only use Boge Cartos. I've bever had a leak, bad carto or any problem for that matter. I use 2.0 on 3.7 volts and 3.0 at anything around 5 volts. I don't even try other because the Boges are so consistent.

Hey Swpr- Where do you get your 3.0 Boges?
 
Status
Not open for further replies.

Users who are viewing this thread