JOYETECH ERoll

[EricDykstra]

I am looking into stainless mesh for the atomizer wick. I have a couple of questions for those of you who are using stainless mesh.

What does the size difference do? (325,400, and 500)

What kind of stainless mesh do I want, and what do I want to stay away from?

 

[volume control]

I am looking into stainless mesh for the atomizer wick. I have a couple of questions for those of you who are using stainless mesh.

What does the size difference do? (325,400, and 500)

What kind of stainless mesh do I want, and what do I want to stay away from?

I just use 325 from OKC vapes. Wicks and burns nice.

 

[four2109]

What pg/vg ratio are you using with it?

I just use 325 from OKC vapes. Wicks and burns nice.

 

[four2109]

Anyone know how to clean the battery?? I think my atty flooded the battery and now it is not working great.
I want to clean, or dry out my battery, any tips?

I have one that the draw got tight on. I dripped some warm water in the side hole with a syringe needle, with the led pointed up, so it would drip out the connector. I haven't tried it yet to see if it helped. Didn't seem to hurt anything though. Led still lights.

 

[volume control]

What pg/vg ratio are you using with it?

Usually between 60/40 and 80/20 PG/VG. Its from wordupecig so it runs a little thick, maybe more like a 50/50 if your vendor runs thin is what youd want or maybe even more vg. The 80/20 from them is thicker than 100% VG from HHV

 

[JuniorNA]

I tried reading through 53 pages of posts but my eyes started to cross at page 20. I just bought the eRoll since my temptations are getting worse now that I'm working from home full time - in constantly thinking of an analog and I think the eRoll will help a lot

Does anyone have a free minute to post the summary of mods that were discussed for the last 50 pages?

Such as mesh for the wicking
Or pushing the wick down a bit down the spike to get more juice. Etc....


Thanks in advance - I'm sure this will help others as well who are reading this thread

 

[DC2]

The only modification anyone has made is the mesh wick, but I haven't tried it.

There is a video somewhere in this thread, but I'm not sure how to find it.
I'm sure someone will come along who can direct you to it though.

 

[JuniorNA]

Thank you ! Lol finding that video in this thread would be like finding a a unicorn in New York City

 

[volume control]

I think this video will show you how, i cant watch since im at work but i think its the right one

eGo-C ecig atomizer head tips, tricks and how to - YouTube

 

[JuniorNA]

Yes very helpful video. Thank you very much

 

[qorax]

Guys,

Won't it be nice if Joyetech released a new longer version of the eRoll tank-cartridge?

Something around 60-70mm in length and which could hold double the amount of e-juice in it. Certainly we could do with a slight length increase, as the eRoll is shorter & thinner than other cig-a-likes. But an increase in it's juice capacity would be welcoming, right?

I hope Joyetech listens.
______________________________________________________
Ps.: I know, I know, we'd then have issues with the PCC.

 

[jingai]

Won't it be nice if Joyetech released a new longer version of the eRoll tank-cartridge?

Yes, along with an alternative shorter battery so the overall length remains the same, so it can still be charged in the PCC without disassembly. I personally think it'd feel more balanced this way too (it's end-heavy now, which makes it more difficult to dangle from the lips).

 

[volume control]

Guys,

Won't it be nice if Joyetech released a new longer version of the eRoll tank-cartridge?

Something around 60-70mm in length and which could hold double the amount of e-juice in it. Certainly we could do with a slight length increase, as the eRoll is shorter & thinner than other cig-a-likes. But an increase in it's juice capacity would be welcoming, right?

I hope Joyetech listens.
______________________________________________________
Ps.: I know, I know, we'd then have issues with the PCC.

Honestly i dont know why the tank is so darn small in that cart, they could expand the fluid reservoir without increasing the size or reducing airflow. Get those Joyetech engineers!!

 

[qorax]

^^^Or a new longer PCC would do as well.

 

[DC2]

^^^Or a new longer PCC would do as well.

No! It's more than long enough as it is.
Any longer and I wouldn't be able to sit down with it in my jeans pocket.

 

[Bookworm]

I agree, I don't want a longer pcc at all. And a longer tank would take away from the main reason I got the eRoll, the small form factor. I love the size of the eRoll and the pcc. Any larger and I'd use something else.

 

[propagandax]

im sorry if this has been addressed but what is the actuall fill line of the tanks? I got all black "sigh" and dont want to overfill. Thanks.

 

[Faylool]

It's just too simply to put a loaded tank on when time. I like it the way it is. Assorted interesting see thru colors would be fun. Something iridescent! Maybe fine sparkle see thru gold to match the tip. Yes I'm a chick.

 

[junkman]

im sorry if this has been addressed but what is the actuall fill line of the tanks? I got all black "sigh" and dont want to overfill. Thanks.

I fill mine to the top

 

[propagandax]

Wow, just got my eroll and I am very impressed with the flavor and hit. Somewhere between a carto and clearomizer, but much closer to the carto. Now if I can just get me one of those pill holders and get my situation organized. Most of the bottles have blunt tips so its tricky to fill the tanks but not impossible.

edit: Just got a head rush, that hasnt happened in a while, LOL. I already use 24mg so I dont have to chain vape. So far so good