Maybe that's why they use gold plated contacts for the ego one tc coils
Joyetech Evic VT 60 Watt
- Thread starter jstrong
- Start date
- th_trl_thread_readers 0
- Status
So my vape shop really gave me an evic today took my ipv4 due to resistance issues they wanted to give me a replacemebt ipv4 which i vaped on for a hour hanging at the shop still wasnt completely satisfied my buddy looks at me and says evic n ipv4 are practically the same price i have a few black and reds do you want that instead so of course i now have an evic and gave back my black ipv4 which couldnt read resistance at all tellin me a .11 nickel build was .27 but the evic was reading at .11 3 ohms tester and a sx mini and a new ipv4 so obviously mine had a defect but have had it for about 6 hours now and completely love it the coils suck but vapenw.com has the rebuidables clr for $14.95 U.S. a lil pricey but cheaper than a 5 pack of coils so id rather build to suit my taste than these .2 prebuilts o yea and joyetech msrp for rebuidable is $22 U.S.
I have 26awg Ti in my Lemo 2, 8/9 wraps 2.5mm I.D and it's great.
470°F, 32watts, 0.41Ω with a bamboo rayon wick.
It's been in for a few days and works as it should.
I'm not sure what you expect it to do, the TC kicks in if I press the fire button without vaping on it, as it should.
When I vape it produces good tasting thick clouds of vapor, what more can I ask for, no dry hits and clouds.
Vaping nirvana.
I got it from here, you only need a small amount.
The strands are all in the same direction and silky smooth, so it makes threading the wick easy.
Spinning Fibre | Ecoyarns - Organic and Eco Friendly Yarns and Fibres
If your VT is working fine I would say love it and enjoy it
what I expect it to do or maybe better what I don't expect it to do;
dropping out TC mode (I can still taste and feel this extremely hot horrible vape in my mouth)
reading the wrong resistance at start
calculating the wrong temp in Ti mode ( I need to set it much higher)
keep asking the same/new coil question at some occasions (mostly outside in the garden or car)
changes to the resistance even when it's locked
giving a inconsistent vape (not always)
showing his firmware version without being upgradable
But when the VT does his job like it should it's a very nice mod, I still like it, it's powerful, good battery life, nice touch and looks but it's the only mod I don't use before watching the screen and taking a carefully test-vape, I just don't trust it anymore. Maybe somewhere a bad connection, this inconsistency in behaviour could point at this but I don't want to open it yet for the sake of warranty and return.
So yes if it was more reliable (in my case) and also upgradable I would be much more positive about this.
Maybe others don't have any problem with it but I do have, I still like mine cheaper Waidea Vapor Flask more.
After having tried out too many builds this only happened once to me. After heating up it caused a short and changed to VW. Maybe this is what happens with all of you.
I still have a hard time setting this up at it should. After a while i loose the flavour and tried almost anything. I revised the wick several times, changed cotton inumerous times, even used silica to see if that whas the problem. Now i have a 0.12 build with awg30 Ni200 and it seems to hold.... have to crank up the temp. to a respectable 270ºC and keep the W low. I checked the "coil building section" and tried a few but for some reason kanthal satisfies me better then Ni. When i take out the build it looks like kanthal with 2 weeks of heavy usage..... Still can't figure out what i'm doing wrong, time to get another TC device and compare them i think or just put this one on hold and go back to my beloved SX mini S-class....
beco
hmm, could that actually be a fail safe? I mean, if the build is under .15 it won't fire in power mode right?
Mine is still working perfectly, but it does sound scary if that would ever happen. What was the power set at when it changed? Was it at your power settings or was it the same as in vt mode?
As I mentioned before, that dropping out of tc mode is a good reason to build below .15 so it won't fire if it does happen
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
Anyone tried the clr heads for the ego one yet? There's a 5 pack for under $10 on slowtech. Would love to hear a review of them on the VT before I order them
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
They do wick better, but its still the same tank..its ok, but can't really compare it to better tanks imo
Sent from my ALCATEL ONE TOUCH 6033X using Tapatalk
If your VT is working fine I would say love it and enjoy it
what I expect it to do or maybe better what I don't expect it to do
What firmware version is yours on? (twenty clicks).
Thanks.
Somewhere I saw that you can display the devices internal temp with a certain number of clicks.... do you happen to know how to do this?
Thanks in advance!
Mine still shows "processing." Geez, I hate Chinese holidays...
If you press it 291 times, you get a secret pacman game
Regards
Tony
Sent from my keyboard through my phone or something like that.
If you press up, up, down, down, fire, fire you will see something amazing.If you press it 291 times, you get a secret pacman game
Regards
Tony
Sent from my keyboard through my phone or something like that.
- Status
