good vid, but i dont like the electronics on top if ever i get juice or condensation leaking into it
Joyetech Evic VT 60 Watt
- Thread starter jstrong
- Start date
- th_trl_thread_readers 0
- Status
Looks nice and clean and they really used all the space inside on a clever way, the housing is thicker then I suspected.
Does a full size Subtank fit without hanging over the sides? That would be just tooooo sweet!
....
I think your just having an off day
My juice consumption has at least doubled since switching to TP
Mostly I blame Titanium .... the juice just tastes so much better now
I think your just having an off day
My juice consumption has at least doubled since switching to TP
Mostly I blame Titanium .... the juice just tastes so much better now
I sort of agree. It seems like i am using much less juice with this TC Ego One Mega, but i've never used this tank before, so I have no good comparison.
This first day with the eVic and Ego One, Ive only used half a tank. I would normally be almost on my third tank with my Cthulhu and iStick 50.
Last edited:
talking about sexy vaperettes, i didnt go to the ECC 2014 EXPO and this is what i missed, dang!
To go out in public like that you have to have some serious nuggets....er...ugh...you know what I mean.
ya, but i'd buy what ever shes selling.
sex does sell, old but true.
WOW is all I can say..... As i posted, after reading all you rave about it on Monday, I pulled the trigger and ordered it monday night and MVS does it again. What great service. I ordered it on the 8th, was shipped out on the 9th, and I have it in my hands on the 10th. Who can ask for more.
As for the eVic, it is unbelievable.. It has some weight behind it, (which I like) but it is almost the same size of the iStick 50 and it does so much more. After hitting it in VW mode for a bit (seems to hit harder at same wattage) I had to jump in and try out the Nickel/TC.... So I threw in the Kanger Ni OCC coils to try it out quick (no time to build, gotta try it lol) and honestly it's the Best hits I have ever had out of my kanger tank.
I slowly ramped it up, right now I'm up to 35w 450F, and its such a flavorful vape, and I can actually draw longer then ever before on OCC and I get no dead/dry/nasty/burnt hit..
I Absolutely LOVE it. I would type more, but it slowing down my vaping lol
As for the eVic, it is unbelievable.. It has some weight behind it, (which I like) but it is almost the same size of the iStick 50 and it does so much more. After hitting it in VW mode for a bit (seems to hit harder at same wattage) I had to jump in and try out the Nickel/TC.... So I threw in the Kanger Ni OCC coils to try it out quick (no time to build, gotta try it lol) and honestly it's the Best hits I have ever had out of my kanger tank.
I slowly ramped it up, right now I'm up to 35w 450F, and its such a flavorful vape, and I can actually draw longer then ever before on OCC and I get no dead/dry/nasty/burnt hit..
I Absolutely LOVE it. I would type more, but it slowing down my vaping lol
I odered mine from Vape NW on Saturday afternoon, and recieved it Monday. Not bad, especially considering they're in Washington and I'm in Kentucky.
I've used them a bunch also.. They do right also...
I did notice that issue with the Kanger NiOCC coils with the ohm changing.. Mine started at 0.14ohm now settled in at 0.12ohm. I'm hitting it at 500F now and I'm actually chain vaping a Kanger OCC coil... That never happens (for me) with my thick juices I always left that to my Starre or VCT Pro lol..
I also noticed it seems to use less power just fine also.. You don't need to much wattage. I can set it at 35w/500F and it works fine, if I do 45w/500F it just regulates the wattage down just a hair quicker, so why even bother is what I'm thinking.. Why make the mod work more (and use more battery) when it is giving me great flavor lol
Gunna be a fun night with my new toy
I had to do the same thing with a dual-coil Ti dripper. Even when I locked it, it dropped the resistance by .02ohms and I had to crank it up to 500degrees to get the same vape. (this happened 3 times after sitting idle for a few minutes) Not sure what to make of that. My Kayfun4 with a single Ni coil has been rock solid for 2 days, and that's without locking the res.I've used them a bunch also.. They do right also...
I did notice that issue with the Kanger NiOCC coils with the ohm changing.. Mine started at 0.14ohm now settled in at 0.12ohm. I'm hitting it at 500F now and I'm actually chain vaping a Kanger OCC coil... That never happens (for me) with my thick juices I always left that to my Starre or VCT Pro lol..
I also noticed it seems to use less power just fine also.. You don't need to much wattage. I can set it at 35w/500F and it works fine, if I do 45w/500F it just regulates the wattage down just a hair quicker, so why even bother is what I'm thinking.. Why make the mod work more (and use more battery) when it is giving me great flavor lol
Gunna be a fun night with my new toy
I heard others talking about this and figured it had something to do with the questionable store bought coils. I'm going to build a single coil of similar resistance for that dripper and see if still does it.
4-5 pages back I posted a video, search insides. *edit it was reposted..
IMO you won't need to for a few years.. And if people think putting in two 3000mah imrs is going to last longer, its not..
The lipo has a flat discharge curve. With imrs your output power would drop considerably after they were half drained.. So the lipo will provide the real power for longer, all the way to the end.
Glad your enjoying it! Its actually normal for premade coils to jump ever so slightly from the heating and cooling from vaping on it. Although we learn that our ohms should stay solid from coiling ni200 for best performance. So nothing to worry about as its normal behavior!I've used them a bunch also.. They do right also...
I did notice that issue with the Kanger NiOCC coils with the ohm changing.. Mine started at 0.14ohm now settled in at 0.12ohm. I'm hitting it at 500F now and I'm actually chain vaping a Kanger OCC coil... That never happens (for me) with my thick juices I always left that to my Starre or VCT Pro lol..
I also noticed it seems to use less power just fine also.. You don't need to much wattage. I can set it at 35w/500F and it works fine, if I do 45w/500F it just regulates the wattage down just a hair quicker, so why even bother is what I'm thinking.. Why make the mod work more (and use more battery) when it is giving me great flavor lol
Gunna be a fun night with my new toy
Last edited:
I was going to mention this, that every mod I've used that has li-po packs gets almost double the life of comparable mah imr batteries
Thanks, good to know, I've never owned a lipo mod. You guys are making it difficult for me not to buy a VT. My local b&m is getting VT kits in this Friday. All three colors and ti and ni heads. They're telling me the sale price is $80.00. A little more than web stores but I like supporting my local community. I really shouldn't get one....yeah, whatever, I'll probably be the first in line!
Last edited:
- Status
