Juice Feeder/Shockwave/AW 10440 Buttons Update

[jimho]

Subscribed!- very much looking forward to seeing this come out....

 

[New_World]

Forced(Fuel) Anodized Vapn Equipment ©

...or....maybe the ForcedFeeder

sounds good to me!

 

[Wacky Dee]

I just dont see how any device that adds only 1/2 inch of height to a PV is going to hold 30ml of liquid ... 30ml bottles for example are huge (30ml = 1Oz)

Is this juice mod going to be leak proof ? Able to supply sufficient liquid to an LR atty during heavy vaping ? I just can't even think of a design that hasn't been done yet... I sincerely hope this doesn't turn out to be the most overhyped thing ever and doesn't deliver.

 

[ukeman]

I just dont see how any device that adds only 1/2 inch of height to a PV is going to hold 30ml of liquid ... 30ml bottles for example are huge (30ml = 1Oz)

Is this juice mod going to be leak proof ? Able to supply sufficient liquid to an LR atty during heavy vaping ? I just can't even think of a design that hasn't been done yet... I sincerely hope this doesn't turn out to be the most overhyped thing ever and doesn't deliver.

haha if this thing, this "Super T Tsunami" works, I'll surely be interested; if not, ha; I've got 4 unreal juice feeding vapor-bomb machines anyway.
Juice'ing is the only way to go.

 

[misterD]

I just dont see how any device that adds only 1/2 inch of height to a PV is going to hold 30ml of liquid ... 30ml bottles for example are huge (30ml = 1Oz)

Is this juice mod going to be leak proof ? Able to supply sufficient liquid to an LR atty during heavy vaping ? I just can't even think of a design that hasn't been done yet... I sincerely hope this doesn't turn out to be the most overhyped thing ever and doesn't deliver.

30ml? thats a lot! where did he mentioned it was going to hold this much? if 30ml is what it will be its fine but i wish it was less than that for i like to switch flavors RY4-VS/VS-VS/RY4HC/RY4bwb's/RY4fsusa/taboo/RY4awesomevapor/RY5...
i guess most of the space it takes goes around the atty.

 

[Infernal2]

I have a feeling it will actually replace the tops of our devices to accomplish some of the space but that's just my guess.

 

[Wacky Dee]

im hoping its just a short tube with a small squeeze bottle in it thats easily refilled and nonmessy ..that'd do me just fine heh

 

[jimho]

im hoping its just a short tube with a small squeeze bottle in it thats easily refilled and nonmessy ..that'd do me just fine heh

I think the 30ml was someone asking back on the first page...
do the math- an 18mm cylinder 1/2 inch high (12.7mm) is about 3.2ml if you overflow it .. I'd suspect we're talking 3ml give or take a hair...which is just fine for the better part of a day's vaping....

doubt you'll see a squeeze bottle here either- it's a feeder (i'd assume auto feed).... and there's that little discussion about using anodized aluminum ...

 

[Stu]

I think the 30ml was someone asking back on the first page...
do the math- an 18mm cylinder 1/2 inch high (12.7mm) is about 3.2ml if you overflow it .. I'd suspect we're talking 3ml give or take a hair...which is just fine for the better part of a day's vaping....

doubt you'll see a squeeze bottle here either- it's a feeder (i'd assume auto feed).... and there's that little discussion about using anodized aluminum ...

Actually this is a quote from forcedfuel from another thread, so unless it's a typo....

this is just the mod, but the battery should give you a 2,3,4 of days of vaping. I have a juice feeder coming out soon that will hold up to 30ml, so you can vape a week i on that. The juice feeded will fit most any mod with a 510, 306 or 901 atomizer.

 

[jimho]

Actually this is a quote from forcedfuel from another thread, so unless it's a typo....

this is just the mod, but the battery should give you a 2,3,4 of days of vaping. I have a juice feeder coming out soon that will hold up to 30ml, so you can vape a week i on that. The juice feeded will fit most any mod with a 510, 306 or 901 atomizer.

Ok... a cylinder 1/2 an inch high would have to have a radius of 27.4mm or 54.8mm (over two inches) across for 30ml.. if it were an inch high, it would still need to be 28mm across... internal diameter... might be a bit unwieldy on top of an 18650 or smaller device, don't ya think? .... definitely would be inconsistent with the design of most of the line...

wish you had linked back... that was a discussion on the Shockwave thread...I read through most of the threads last night after ukeman pointed me here... there was some on and off with the large dispenser ..
http://www.e-cigarette-forum.com/fo...g/122789-shockwave-26650-mod-teaser-pics.html
read a bit further down..

..... the operative term I believe is "up to"... suggesting that there will be different configurations available...

I don't want to put words in anyone's mouth and Dave indicated there are some very good business reasons for not putting any pictures up just yet or commenting further, but i suspect we're all correct here and we'll see some different containers with the same guts.... which would be consistent with the modular designs todate....

 

[forcedfuel50]

i guess most of the space it takes goes around the atty.

I can tell you, it doesn't have any liquid surrounding and coming into contact with the atomizer exterior. Thats another big no no; ejuice is a mild corrosive and all atomizers are painted and/or clear coated. You don't want to be sucking in any fine paint particulate matter off your atomizer. This design also eliminates the juice sitting in an non-anodized aluminum tank, another big no no as the juice is slowly disolving the aluminum and you are inhaling and consuming the aluminum particulate matter. At the very minimum the aluminum should be anodized aluminum, and better yet, not have the juice sit in an aluminum holding tank period would be ideal.

Did i say 30ml? Hmm...maybe i meant more like 10;-)

 

[Wacky Dee]

with all that said I think I'm onto something as Dave hasn't either confirmed or denied my suspicion hehe .. I reckon (and hope) it's a squeeze bottle mod that sits neatly above atty and lets you "drip" with a simple squeeze or 2 prior to vaping

If it's not ... there's an idea for someone else to engineer

 

[forcedfuel50]

with all that said I think I'm onto something as Dave hasn't either confirmed or denied my suspicion hehe .. I reckon (and hope) it's a squeeze bottle mod that sits neatly above atty and lets you "drip" with a simple squeeze or 2 prior to vaping

If it's not ... there's an idea for someone else to engineer

Somone else had speculated it was that too....hmm...curious...

 

[Stu]

Ok... a cylinder 1/2 an inch high would have to have a radius of 27.4mm or 54.8mm (over two inches) across for 30ml.. if it were an inch high, it would still need to be 28mm across... internal diameter... might be a bit unwieldy on top of an 18650 or smaller device, don't ya think? .... definitely would be inconsistent with the design of most of the line...

wish you had linked back... that was a discussion on the Shockwave thread...I read through most of the threads last night after ukeman pointed me here... there was some on and off with the large dispenser ..
http://www.e-cigarette-forum.com/fo...g/122789-shockwave-26650-mod-teaser-pics.html
read a bit further down..

..... the operative term I believe is "up to"... suggesting that there will be different configurations available...

I don't want to put words in anyone's mouth and Dave indicated there are some very good business reasons for not putting any pictures up just yet or commenting further, but i suspect we're all correct here and we'll see some different containers with the same guts.... which would be consistent with the modular designs todate....

Yeah, I thought that 30ml sounded like a bit much for something that only adds 1/2 inch. And you're right, he did say that the key words were "up to" 30ml.

I can tell you, it doesn't have any liquid surrounding and coming into contact with the atomizer exterior. Thats another big no no; ejuice is a mild corrosive and all atomizers are painted and/or clear coated. You don't want to be sucking in any fine paint particulate matter off your atomizer. This design also eliminates the juice sitting in an non-anodized aluminum tank, another big no no as the juice is slowly disolving the aluminum and you are inhaling and consuming the aluminum particulate matter. At the very minimum the aluminum should be anodized aluminum, and better yet, not have the juice sit in an aluminum holding tank period would be ideal.

Did i say 30ml? Hmm...maybe i meant more like 10;-)

To be honest, I'd be happy with 3ml. Thanks for the info though!

 

[forcedfuel50]

Thanks STU! I actually am enjoying the speculation on what it is or is not. I meet with my patent attorney tomorrow and i hope i get the green light to unveil this bad boy soon. The machine shop also emailed me this morning and they are working on them as we speak Won't be too long now!

 

[stubear62]

Now, David..
This will only fit a Mod?
It won't fit an eGo?
Hmmm, looks like I have to buy a new Mod now..

 

[jimho]

I agree on the 3ml... lasts most of the day for me now with bottom feed. 10ml is more than enough.... can't wait to see it

- thanks for all the info and good luck with your patent attorney.
I'm sure as word gets around, there's going to be a big audience for this one....

 

[forcedfuel50]

It will fit most all ecigs, including the Ego. I'll be doing up a demonstration video too here shortly.

 

[CloudBurst]

I hope they're making several (hundred)! This sounds great! I've been looking for something like this for a long time now!

Sent from my Droid using Tapatalk

 

[forcedfuel50]

The 30ml version is only for those hardcore vapers who need a weeks supply as they traverse the Gobi desert. All others i suggest the 10ml version...