juice in mouth what could cause this?

[DUBBER6D9]

So I recently have been getting a few drops every time I hit it in the beginning then it stops as I pull always shoots right to the top of my mouth I run a kooper plus 200w with a tfv4 tank a quad coil atomizer run it at .14ohms 430° to 450° at 85w to 100w tried changing temp an wattage even messed with air flow tried leaving a gap on the mouth piece for air tried to not take hard lung hits an tried easy pulling longer hits an same checked all seals even replaced them an still the same??? I've tried a variety of ejuices from black hat, the clown, Beantown an even the shops blend all same do though have less drops coming up with thicker juice like from Beantown (soul custard cake flavor)

 

[OhTheAgony]

Not sure if this is helpful at all, but when it happens to me it usually means that I haven't used enough wicking material.

 

[DUBBER6D9]

I'm using a smok quad coil atomizer so no building

 

[Hitmetwice]

You could try inhaling a couple seconds longer after letting off the fire button to remove all the vapour.
At 100 watts that coil will still vapourize liquid till it cools. Drawing longer will cool it quicker and there should be less build-up in the coil/chimney area. hth, cheers.

 

[DUBBER6D9]

I tried that to an at even 85w it still does it never happened till last night an into today using black hat ejuices right now

 

[morningdew]

Many things can cause this...slightly flooded atomiser, a drip tip that is too narrow bore for your style of vaping - the narrower the bore the more focussed the suction - seriously I have cured the odd bit of juice in mouth by simply switching drip tips!!!...can also be an atomiser that suits higher vg juices - kanger sub coils spring to mind from m experience. As suggested too low a wattage.

Also sometimes over priming a coil can cause this.

If you're not using a wider bore drip tip and you have one try that.

 

[DUBBER6D9]

The tip is big like a dripper bien it's a tfv4 tank an the only other tips I have won't fit the tank bien there too narrow in diameter an the atomizer is really open an has a lot of cotton in it with a lot of air flow cause this started half way threw the day after I switched out the triple coil atomizer to the quad coil one witch has 4 holes on the bottom then then cotton all the way around the walls of the tank from bottom to top then a spiral claptop coil from top to bottom might try to find a picture online of it an post it that's probly my problem don't kno

 

[DUBBER6D9]

One on left is what I have in now on right is the one I had in before

 

[Imfallen_Angel]

Could be the liquid's formulation that simply wicks more (too much). From liquid to liquid I see a huge difference at times.

As you're already checked the seals... hmm.. bad coil? (as in the wick is flawed)...

if it doesn't do it at all with other liquids, then it's the wick and formulation of the liquid, if it does it with other liquids, then it's got to be the coil/wick (or a seal that you might have missed, or maybe a flaw in the threading so you'd be screwing it at a off angle causing some overflowing?)

 

[DUBBER6D9]

I know I screwed it on right but will strip it back down check seals again an replace ato with another of the same one cause besides the juice drops in the beginning of the hit I like this atomizer/ coil design a lot more then the other

 

[Hitmetwice]

Just guessing here... with all the heat the 3 and 4 coil atties generate even 100 vg juices will flow like water. No?

 

[DUBBER6D9]

An might be cause black hat is a watery juice but the thicker juice like Beantown an the clown is more like a light syrup

 

[DUBBER6D9]

Yea at 85w an 420° even the thicker juices are doin it just less then the watery ones

 

[Imfallen_Angel]

Just guessing here... with all the heat the 3 and 4 coil atties generate even 100 vg juices will flow like water. No?

My co-worker got some "cheap" liquid at some store, he noticed right away that he blew through the bottle 3x faster than his usual stuff from other stores.

Got to wonder if some places water the VG/PG in their liquids down.

 

[Hitmetwice]

My co-worker got some "cheap" liquid at some store, he noticed right away that he blew through the bottle 3x faster than his usual stuff from other stores.

Got to wonder if some places water the VG/PG in their liquids down.

I believe alcohol(or an equivalent) is used in some juices or flavours as well. Got some small tester bottles from a well respected vendor with highly praised juice in these parts years ago. Left the caps off for 24hrs. or so to let steep and ended up with a couple bottles only half full. My guess is alcohol evaporated off. Real nice juice though.

Only hunching and guessing here so take it with a grain of salt.
(this is my usual modus operandi)
Cheers.

 

[Imfallen_Angel]

I believe alcohol(or an equivalent) is used in some juices or flavours as well. Got some small tester bottles from a well respected vendor with highly praised juice in these parts years ago. Left the caps off for 24hrs. or so to let steep and ended up with a couple bottles only half full. My guess is alcohol evaporated off. Real nice juice though.

Only hunching and guessing here so take it with a grain of salt.
(this is my usual modus operandi)
Cheers.

Actually, I was at a store the other day, (sadly, is going under thanks to the new draconian laws that passed here, destroying their client base) and she had heard of another store that did just that (used a lot of cheap alcohol in their liquids).

But I've heard of this other store too from other people, I wouldn't go there, plus the fact that my daughter (at the time) did buy her original kit at this store and it was a mess and they were nasty about it.

 

[jacob bonilla]

not sure If your using a dripper I assume not if your not building but this usually happens to me when juice well is flooded. I never had this happen with atomizers as the ones I used had horrible wicking even when primed. usually when vaping at a high temp it will get rid of this fast but in your case not so sure. I also have a mini rda and rta in the rda this would happen a lot I mean it was super tiny and sucking in too hard would easily cause this where as the rta it was harder because it's harder to suck in at least mine was

 

[speedy_r6]

Is that the tf-q4 coil? If so, that coil is not made for temp control. Run it in wattage mode.

 

[DUBBER6D9]

I run my modes in wattage mode but it's also a tc mod don't know how I'd turn that off the mod an tank are made by the same company an was rated in the top ten mod an tank combos this year well the kooper plus an the xcube with the tfv4 tank but I never had this problem with the triple coil atomizer till I switched to the quad coil one an on side note how good are the .5 ohm beast atomizers for the tfv4?

 

[Chasperk]

Is that the tf-q4 coil? If so, that coil is not made for temp control. Run it in wattage mode.

This. You can go to kooper.com and find a .pdf of the manual for your mod. That should tell you how to change to only wattage mode.

I don't think it's a juice issue as I have the same tank and quad coil, and use a lot of different juices and ratios with no problems. As others said it could be a bad coil or an o-ring too.