Do we have any idea when the final run of the JGG (specifically the brass version) will be? I can't buy the BJGG from vaperev right now, but I'm hoping I don't miss my chance.
Just GG
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
This run is the final run of the complete unit. Imeo has a few he will be sending to sellers as they order them it sounds like (around 300) but otherwise he has stated no more complete units. However at some point you will be able to piece one together from parts if you are patient.
Worst case scenario if you don't have the funds in time hopefully you can pick one up on the classies. People are pretty honest on there and you can normally find a gg for retail or just under retail on there. That is how I got a few of my gg's...
I wouldn't mind being the first to buy the best electronic APV ever made. There are very, very few great high-end APV's. Where do I send my check, and when should I expect to receive "it"?
I am working on it Bill and be sure that it will be better than any other electronic part you know.
These new devices, will they be incorporating all sizes of batteries? Will they be longer/shorter, thinner/wider?
I cant say more poppa. If I say "good morning" then someone else will say it before me. I really hate this silly situation. We are surrounded by thieves.
I am shaking my head
I am shaking my head
Last edited:
Just to inform Ithaka get better air flow and taste better on the new JGG CT.
The other thing is this new airflow ring,very easy to make fine adjustments,
after you get use to it.
just a touch always in the same direction make different.
Now I see that we could never was able to put it 100% in the correct place.
even small move of the old
Screw ring was to much for real fine tuning,
For those that do look for it.
I know that to those of us that use AR all the way open it's doesn't matter,but there are others member that do
Prefers a bit of resistance in there draw like me.
Also the air flow without the brass nut of the Ithaka (just center post on the CT post) provide more consistent air flow.
As maybe some do know it from the GGTS connection(for me it's new).
I really like the performance of the Ithaka on the JGG it's vape better.
The other thing is this new airflow ring,very easy to make fine adjustments,
after you get use to it.
just a touch always in the same direction make different.
Now I see that we could never was able to put it 100% in the correct place.
even small move of the old
Screw ring was to much for real fine tuning,
For those that do look for it.
I know that to those of us that use AR all the way open it's doesn't matter,but there are others member that do
Prefers a bit of resistance in there draw like me.
Also the air flow without the brass nut of the Ithaka (just center post on the CT post) provide more consistent air flow.
As maybe some do know it from the GGTS connection(for me it's new).
I really like the performance of the Ithaka on the JGG it's vape better.
I also like the new air control ring because of the 4 flat areas for grip. These flat spots allow me to lay the JGG down without worrying about it rolling and without using the button to keep it from rolling.
Ok, because some people were interested, here is my documentation over the last 3 hours regarding the tarnishing of the Brass. I will continue to document the changes, however the most drastic changes happen very quickly.
I am not sure how to attach larger pictures, so if anyone would let me know I will do that. Otherwise, PM me your email and I will send you the full size images.
The body of the JGG has not been polished since I received it on October 11, 2013 (12 days). The Stealth Cap on the SS GG is about 1 month since I polished it. The Brass extension tube was polished with Mother's Metal Polish and waxed with Meguiar's Gold Class Carnauba Plus at 8:30 am 10-23-2013 and not handled until tests began at 9:00 am
I documented Baseline, 30 minutes, 90 minutes and 180 minutes. Three hours to match my 12 day old JGG, the only difference now is that the extension tube is shinier than the JGG.
I am not sure how to attach larger pictures, so if anyone would let me know I will do that. Otherwise, PM me your email and I will send you the full size images.
The body of the JGG has not been polished since I received it on October 11, 2013 (12 days). The Stealth Cap on the SS GG is about 1 month since I polished it. The Brass extension tube was polished with Mother's Metal Polish and waxed with Meguiar's Gold Class Carnauba Plus at 8:30 am 10-23-2013 and not handled until tests began at 9:00 am
I documented Baseline, 30 minutes, 90 minutes and 180 minutes. Three hours to match my 12 day old JGG, the only difference now is that the extension tube is shinier than the JGG.
I still haven't laid my GG on it's side unless on cloth lol.
Sent from: The Land of Tortuga!
I polished with Mother's last night does this wax give good protection?
Sent from: The Land of Tortuga!
I think Polish only, is not suppose to give any protect unless it's
Combine with some coating add-on formula.
But it keep your mod very smooth so it may be a bit more resistance to scratches.
Combine with some coating add-on formula.
But it keep your mod very smooth so it may be a bit more resistance to scratches.
To be honest, I cant tell that it adds any benefit. It makes it shinier, but as soon as I touch it the tarnish starts to go off. I think it falls into the YMMV territory (Your Mileage May Vary)
Last edited:
I definitely agree with this, however there are times when out and about or what have you that I would rather lay it down than risk standing it up and it getting knocked over...
I apply this :
And it's hold full day, and before night again,and this keep it shine like new.
It's seconds to apply 1minute to dry seconds to rub off.
I hear ya! I just haven't yet had to be in one of these situations and am glad to know that the design will keep it from rolling.
Sent from: The Land of Tortuga!
- Status
