You could try raising the connection inside the CT by turning the slot counter-clockwise to raise it (id you haven't already). it might be enough to get a connection.
Just GG
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
My first GG because my bro bought me one ask an early xmas present. Got SN: 0091 and my bro has 0057 I believe.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Have you tried to unscrew the connector pin? I had same issue with Ody but once I unscrewed it, it was working just fine
Im thinking of getting a polished kayfun 3.1 to slap on top.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
an Ithaka would be much better gad. Only Ithaka has all the options you need
I'm so ....... My kayfun lite was threaded so tight onto the gg collection tank that I spent 2 hours trying to get it off. Then I was so mad that I took 2 pairs of vice grips and stuck one straight on the kayfun and the other straight on the collection tank and it still wouldn't budge and scratched both pieces all up. I then stuck the gg collection tank straight on a table vice and used vice grips on the kayfun and it finally came off. Needless to say there is now a kayfun lite in Tampa's Bay and a gg collection tank that I'm going to have to sand for a day. Sorry imeo
I decided to sand it down and polish it back up. I started with 220 grit and moved on to 400 then 600, 1000 and finally 1500 grit. I could of moved on to 2000, 2500, and 3000 but find it not necessary with stainless steel. I finally polished it with mothers mag and aluminum polish. Here are the results. There is something that looks like a mark on the right of the collector tank in the final picture but it is something off of the reflection...
This is the picture of the damage. There is semi deep circular scratches all the way around from putting it onto a table vice which was a last resort
Here is a picture of it evened out with 220 grit. I actually liked the brush look of 220 and also when it was at 400 grit. I might have another project now
This is a picture of the brass top cap evened out with 220 grit. Brass is a lot softer so it was very easy to even out the semi deep scratches in the lid. If I were to brush the brass though it looked best when it was at 400 or 600 grit.
And finally the finished product. I already had some light scratches before so now it is in better condition and looks good as new
Last edited:
I decided to sand it down and polish it back up. I started with 220 grit and moved on to 400 then 600, 1000 and finally 1500 grit. I could of moved on to 2000, 2500, and 3000 but find it not necessary with stainless steel. Here are the results. There is something that looks like a mark on the right of the collector tank in the final picture but it is something off of the reflection...
This is the picture of the damage. There is semi deep circular scratches all the way around from putting it onto a table vice which was a last resort
Here is a picture of it evened out with 220 grit. I actually liked the brush look of 220 and also when it was at 400 grit. I might have another project now
This is a picture of the brass top cap evened out with 220 grit. Brass is a lot softer so it was very easy to even out the semi deep scratches in the lid. If I were to brush the brass though it looked best when it was at 400 or 600 grit.
And finally the finished product. I already had some light scratches before so now it is in better condition and looks good as new
WOW very nice work dusty!!
Sent from: The Land of Tortuga!
imeo, I would pay full price for a brass collector tank, if you decided it was safe to go that route. I don't think it is impossible, seeing how the brass stealth cap I have is brass for looks but with a sheath for the 510 in SS.
Perhaps there should be a poll to see how many of us would want on of these for our brass justGG? This way, you could sell some and make a profit, which would defray some of the cost of replacing the other CTs for free.
Everybody wins. The Kobayashi Maru can suck it.
Perhaps there should be a poll to see how many of us would want on of these for our brass justGG? This way, you could sell some and make a profit, which would defray some of the cost of replacing the other CTs for free.
Everybody wins. The Kobayashi Maru can suck it.
Last edited:
Ithaka is so much better than kayfun, I got rid of my kayfun, but Ody is even better lol......sorry ithaka lovers....even though you can do so much more on ithaka.
I'm in for the brass CT, but I'd rather have it instead of another SS CT, I hope it can be done...
if you know me kata, I am not on profit but on satisfaction of my customers. As for the brass CT, I think that its not a bad idea because liquid that comes in touch with it, is unvapable. It becomes vapable only if we have a gurgling. But if we have a gurgling we just empty the CT.
I would love a brass collector tank!! That's exactly the look I want. Example:
Sent from: The Land of Tortuga!
Of course, but we want you to make profits. You can have both!
Another idea: for those with older GGs and Ithakas, a new Ithaka base with the justGG AC ring. I think a lot of customers would pay good money for that, too. The Ithaka on the justGG using the native connection and the justGG AC looks insane. It made me start using my 18650 batteries again!
Another idea: for those with older GGs and Ithakas, a new Ithaka base with the justGG AC ring. I think a lot of customers would pay good money for that, too. The Ithaka on the justGG using the native connection and the justGG AC looks insane. It made me start using my 18650 batteries again!
Brass collector tank is a must... Imeo you can simply put a warning on it of the dangers you feel this implies.. seriously 90% of us don't care. I have used a brass control tank before and have 2 from another modder.. nothing compared to your quality and it was perfectly fine. Even with atomizers that did leak. It didn't bother me. The look was awesome.
Good thing is you have already given everyone a proper SS so this is a demand but you have the back up that you are against it BUT if you all insist then it's at your own risk... If you don't make them Imeo someone else will and that someone else shouldn't be able to benefit from this.
This will be the last time for mechanicals and the JustGG is the last so why not let us have a brass control tank that we will all treasure
and have all wanted for soooo long.
Good thing is you have already given everyone a proper SS so this is a demand but you have the back up that you are against it BUT if you all insist then it's at your own risk... If you don't make them Imeo someone else will and that someone else shouldn't be able to benefit from this.
This will be the last time for mechanicals and the JustGG is the last so why not let us have a brass control tank that we will all treasure
and have all wanted for soooo long.
I will sell justGG parts soon kata, so all people that want this look they can have it for sure. Its a very nice idea and I will do it for sure
- Status
