Just GG

[legion13]

excelent! so the #'s (20x1,5 ) stand for od, id and with?

20=?

1=?

5=?

and is the measurement in MM or inch? must be mm. sorry very confusing.

 

[Darkreign]

They are metric measurements so mm.

McMaster lists the measurements in reverse order from Imeo. So a 20x1.5 for the CR would be a 1.5x20 on Mcmaster Carr.

Also a thing of note, European annotations dictate a comma (,) where us people in the US use a period (.) It seems we just have to be different from the rest of the world.

 

[imeothanasis]

guys, I dont remember if I made a mistake on what I said about o-rings, but the 20x1,5 will make CR more loosy, so you need 2 o-rings 21x1,5 inside CR. But as I said before, if this doesnt fix the issue then ask vasillis for a new free CT

 

[julpin]

Hello everyone!

I ordered Sharkhide, is on its way. Any tips on how to use it? What do you do with the engravings, do you pass the microfiber cloth through them or tape them?

I´ve been dying to know if there is a place to buy a GGTS. I´ve done a lot of searching in the forums but no luck. I know it´s a little too late but i REALLY want one.

Thanks guys.

 

[legion13]

im so sorry, last question, i promise

so buy this?

Metric Buna-N O-Ring, 1.5 mm Width, 21 mm ID

or this

http://www.oringsandmore.com/metric-viton-orings-21-x-1-5mm-price-for-10-pcs/

thanks for all of the help to all!

 

[imeothanasis]

choose the second one legion

 

[Poppa D]

I have some orings of various sizes, but of course their all way to fat, so I tried a different approach. I took off the AC ring, cleaned all of the surfaces, then took a tissue placed it over the top of the JGG and installed the CR over it, trimmed off the tissue left protruding out, just to snug it up. The CR is supper snug now, almost to snug, but it serves as a quick fix until I round up some different orings.

 

[Electraglide1]

I just took mine completely apart and cleaned the entire device. When I reassembled I put the ac ring on with the o-rings completely dry. For right now it's tight as can be-you can move it with considerable effort. I guess it will work great until I manage to dribble juice on it.

 

[Itshak]

That's what I do also Electra.
Wiping just with paper towel only when there is already juice there will not
Be so affective.
When this happen like poppa describe I remove AR and clean with water wet paper towel,
The wipe it dry,this make it come back to it's original tightness.

 

[julpin]

Very nice Avatar Itshak

 

[Itshak]

Thanks julpin,
I'm glad you like it.

 

[tmccooljr]

Been away from the thread a little while during the holidays. Imeo do you know around when you will be making the 650 tubes for JGG, seems like you are working on allot of parts right now and was wondering if that was one of them?

 

[imeothanasis]

yes tm, I am making them together with the rest of the spares

 

[soulseek]

I assume Voltage Drop on the Brass JGG is mainly dependant on cleaning contacts right? The tubes shouldn't matter that much yes?

 

[Aal_]

I assume Voltage Drop on the Brass JGG is mainly dependant on cleaning contacts right? The tubes shouldn't matter that much yes?

In my experience yes, however clean the threads too, nothing to lose. Threads are best cleaned with a toothbrush/toothpaste

 

[tmccooljr]

The lazy mans JGG. Gotta love having that much juice and a mod always ready on the side table. Ithak like your pictures allot, gotta post a pic soon of my GG family!!

 

[imeothanasis]

it matters too seek. Threads have to be very clean

I assume Voltage Drop on the Brass JGG is mainly dependant on cleaning contacts right? The tubes shouldn't matter that much yes?

 

[kimochi-ii]

Is there any pass through available for just GG? I need one as I'm in the car most of time and a 18650 only last me 2-3 hours. If price is not a concern is there any good quality one that can be use with gg? Thank you!

Sent from my GT-N7100 using Tapatalk

 

[CaptSteve]

Is there any pass through available for just GG? I need one as I'm in the car most of time and a 18650 only last me 2-3 hours. If price is not a concern is there any good quality one that can be use with gg? Thank you!

Sent from my GT-N7100 using Tapatalk

No there isn't sadly

 

[julpin]

Hello everyone! I guess i have everyone tired of me asking questions all the time... sorry about that. Its just that i have another jGG coming my way and want my small collection to work properly. The firing buttons just keep coming apart no matter how much i tighten sooner or later becomes loose. Any tips?