Status
Not open for further replies.

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
Oh snap, yer not a hit man are ya?:D

:laugh: Those are ideas on projects I start later then sooner. I write everything down anthing that pops up in my head. Reminds me that I am not boring since everyone tells me I do the same things every week on the exact same days and time. I still need to squeeze in a few new hobbies and project.


If anyone decides to try this please post results! This is my method for getting the most consistent results. Sometimes I get a really good head I like so I vape that for couple days take it out and save it and start on a new one.
 

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
Does anyone have this problem with their vapeonly bcc? I tend to get gurgling around the 1ml mark. If my tank is above that I don't get any gurgling but once it drops down to almost 1ml and below it starts acting up.

I just built a 4x4S with a 5S feeder wick made from the strands I've pulled out of the 4 wicks. 21 strands and 5 wicks total.
 

BJ43

Vaping Master
ECF Veteran
Verified Member
Nov 27, 2008
5,896
7,212
82
Does anyone have this problem with their vapeonly bcc? I tend to get gurgling around the 1ml mark. If my tank is above that I don't get any gurgling but once it drops down to almost 1ml and below it starts acting up.

I just built a 4x4S with a 5S feeder wick made from the strands I've pulled out of the 4 wicks. 21 strands and 5 wicks total.

I finally just gave up on the vapeonly. Gurgling and constant condensation under the mouthpiece. Protank and Evod are my preference.
 

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
I finally just gave up on the vapeonly. Gurgling and constant condensation under the mouthpiece. Protank and Evod are my preference.

I notice that when I place my coil and wick into my vape only I tend to make the middle to the top of the coil sit below where the lowest section of the vapeonly head. I am going to try different coil placement position. The head I built the other day was really good in the vapeonly but not I get hemp taste. I mean I sorta like it but its messing with what I want.
 

chet

Ultra Member
ECF Veteran
Verified Member
Jul 12, 2011
1,229
944
Vancouver, Canada
Yeap, I have the same problem. When there's very little juice left in the tank the gurgling starts, and when I unscrew the tank I see a juice well in the connector part. So somehow it leaks when there's little juice left in the tank. So I usually refill before the juice level gets too low.

I'm currently using four wicks setup, with a larger coil diameter wrapped on 2.8mm screw driver. I still get a slight gurgling but juice doesn't quite make it to my mouth unless I chain-vape taking like 10 draws straight. When it starts gurgle I just put it down for a minute and when I come back on it gurgling is gone until I take about 5 vapes. I don't like that, but my vaping habbit works around the problem I guess. I wish Protank had a bigger capacity, then I would migrate to it completely.
 

Mackhaio5

Senior Member
ECF Veteran
Verified Member
Mar 27, 2013
95
46
38
Huntington Beach, CA
Yeah I do find myself refilling the protank mid day. I broke one of my protanks and I removed all the glass and glue inside the top and bottom housing. I am looking for something thats big enough to out on the outside instead of inside. I got a bunch of protank heads so I don't feel like throwing the broken one away.
 

PinoyBoy

Super Member
ECF Veteran
Verified Member
Feb 4, 2013
303
376
WA State, USA
You guys buy them from lovepedal at ebay?
Hemp Twine Cord 1mm 20 Test 5 10 or 25 Yards Color Selectable | eBay

BJ43 said that all his 2mm twines from lovepedal are 12 strands, but the link above says that "We also added 2mm 3-strand hemp twine. Please note this is not the 12 strand." Is this the correct one? I keep reading in the past few pages that we should get the 12 strand hemp twines.
 
Last edited:

BJ43

Vaping Master
ECF Veteran
Verified Member
Nov 27, 2008
5,896
7,212
82
You guys buy them from lovepedal at ebay?
Hemp Twine Cord 1mm 20 Test 5 10 or 25 Yards Color Selectable | eBay

BJ43 said that all his 2mm twines from lovepedal are 12 strands, but the link above says that "We also added 2mm 3-strand hemp twine. Please note this is not the 12 strand." Is this the correct one? I keep reading in the past few pages that we should get the 12 strand hemp twines.

No the 3 strand is not good. Send Lovepedal an email and ask for the 2mm 12 strand or buy from another source, You can also use the lovepedal 1mm 7 strand and double it.
 

Kent Brooks

Resting In Peace
ECF Veteran
Apr 24, 2013
17,678
91,969
48
Omaha, Nebraska, United States
www.nicoticket.com
No the 3 strand is not good. Send Lovepedal an email and ask for the 2mm 12 strand or buy from another source, You can also use the lovepedal 1mm 7 strand and double it.

I just noticed it say it's 3 strand right on the listing. I need to cancel that order.

(edit - she does have 12 strand)
 
Last edited:

BJ43

Vaping Master
ECF Veteran
Verified Member
Nov 27, 2008
5,896
7,212
82
One of my best setups : A protank with 1.8 30g coil with XC-116 thru the wick and 2mm hemp flavor wick. No gurgle, great vapor, noticed a few seconds after each of my double 10 second draws, I get a little bubble of air, telling me everything is working fine. Coil vapes off the juice, juice gets replaced on the coil by the wick, and air replaces juice in the tank that re-wet the coil thru the wick. I love when physics works as I expect it to and gives me a great vape. Click on pic for video.

 
Status
Not open for further replies.

Users who are viewing this thread