Kanger EVOD

[josho]

Doh.....

I think the dry hits were completely operator error. I didn't really like the juice i had in it so I took it apart to clean... and realized I hadn't screwed the coil down all the way. After I did that and refilled, not a single dry hit.

 

[mayamason]

I just got two in today and so far I'm really liking them. Plus they look sharp as a smaller setup for taking out.

 

[James Tank]

I just got two in today and so far I'm really liking them. Plus they look sharp as a smaller setup for taking out.

View attachment 178800

Yup...it does looks nice and handy

 

[vaprpunk1987]

Secondly, I noticed the coil head on one of the EVOD's was only screwed into the base half way. I only noticed this when I felt a rattle while unsrewing the base from the EVOD. Glad I noticed this before I filled it up with juice or it might have leaked. The second EVOD had the coil head screwed on all the way. This is something you may want to check before filling for the first time.

yep, that happened to me. i didnt notice at first and over tightened my tank to the base to get it flush. then i had to try to take it off with pliers and a towel. and... it crapped out on me. i must have squished the base that goes on the ego because i get zero airflow now. i have more on order if ivape.net would get off their .... and get it here.

yeah im calling them out 2nd time priority was slower than 1st class.

 

[rebar]

These things rock! My hornet rba is collecting dust.

Id be interested in trying to use hemp wick on one. Anyone rebuilt one without just replacing the head?

 

[Koman]

I just got two in today and so far I'm really liking them. Plus they look sharp as a smaller setup for taking out.

View attachment 178800

Looks nice and handy!

 

[MF DOOM]

Just got one, I love it!
That FLAVOR!!!

One question though, how to get to the coil? On the coil assembly it looks like that grooved post has a seam, meaning it can be removed to expose the coil? I want to slip a wick in there, how to get it off?
Thanks.

 

[mayamason]

Just got one, I love it!
That FLAVOR!!!

One question though, how to get to the coil? On the coil assembly it looks like that grooved post has a seam, meaning it can be removed to expose the coil? I want to slip a wick in there, how to get it off?
Thanks.

Yep! Raise or remove the little silicone cap at the base of that grooved post, then pull the post up and you'll see the two flavor wicks. Pull those off (gently if you want to reuse them) and you'll see the coil.

Since my last post I've bought 5 more of these. I absolutely love them. I had become so accustomed to the T3 letting me know when it was getting low *gurgle*gurgle*gurgle*.... the EVOD is so quiet, it happily let me vape every single drop out of it, until I got a burnt taste and realized it was bone dry!

 

[MF DOOM]

These EVOD's are GREAT!
No leaks, probably because I made sure to tighten the coil base to the actual base.
I put the same juice in a boge LR as the EVOD...the sweetness only come through on the EVOD...so you boge guys...I don't knoooooooooow!
You guys won't be disappointed by these. Do get one!

 

[CloudZ]

These things rock! My hornet rba is collecting dust.

Id be interested in trying to use hemp wick on one. Anyone rebuilt one without just replacing the head?

Yes. They are 10x easier to rebuild than the T3 and even a little easier than the vivi nova due to the additional room to work. I have only used cotton and it works great.

Sent from my Incredible 4G LTE using Tapatalk 2

 

[Blackbeard]

I'm kinda testing the waters here as far as clearos go. All replies seem to be optimistic here, so I might try one. It's been recommended to me to use a LR coil because I use eGo non-adjustable 3.3V batteries, so do all of these come as 2.5 ohm originally. I'm also finding it hard to find anyone that has the 1.8 ohm replacement coils. What's the minimum PG recommended in one of these? I typically mix 75/25 but have started mixing 60/40 Pg/VG. Are both of those thick enough to prevent leaks and any of the other problems?

 

[mayamason]

I'm kinda testing the waters here as far as clearos go. All replies seem to be optimistic here, so I might try one. It's been recommended to me to use a LR coil because I use eGo non-adjustable 3.3V batteries, so do all of these come as 2.5 ohm originally. I'm also finding it hard to find anyone that has the 1.8 ohm replacement coils. What's the minimum PG recommended in one of these? I typically mix 75/25 but have started mixing 60/40 Pg/VG. Are both of those thick enough to prevent leaks and any of the other problems?

I ordered my second batch from smoke-evolution.com, those came standard with a 1.8ohm head. The website says they are out of stock but expect another shipment in tomorrow. They work well on my standard 3.3V batteries.

As far as minumum PG, I don't know for sure as most of the juice I've run through them is around 70/30. I think you'll be fine at 60/40, or even thicker, as they have the same wicking principle as the T3 (which runs high VG juices quite well, IMO).

 

[tmoore]

What's the minimum PG recommended in one of these? I typically mix 75/25 but have started mixing 60/40 Pg/VG. Are both of those thick enough to prevent leaks and any of the other problems?

I've run as thin as 80/20 in two different evods, and as thick as 35/65 in several with no problems.

 

[tmoore]

I ordered my second batch from smoke-evolution.com, those came standard with a 1.8ohm head.

Good find. I've been shopping the heck out of these since they came on the scene, trying to find certain colors at best prices. All a I saw anywhere were the 2.5ohm. ivapes was one of the few that had replacement coils, and they had both 1.8 and 2.5 in coils but not the whole evod.

 

[mayamason]

Not to sound like a walking commercial, but...

MyVaporStore has the EVODs in stock with the 2.5 ohm head, and the replacement coils in 1.8ohm (but not 2.5 at the moment - they must be temporarily out, because this is where I bought my first ones, plus I got 2.5ohm replacement heads).

 

[stashbldr]

I use my EVOD's with 60PG 40VG. They are super simple to rebuild and they work great.

 

[Lahme]

Is the evod ego-threaded?

 

[tmoore]

Yep, ego threaded.

 

[Lahme]

I just ordered two of them from myvapor, lets see what the hype is about

 

[Lahme]

Anyone have any feedback on how these work with ego twists?

How many ohms should work perfectly with them?