Kanger protank ohms / volts

[MesaMitch]

Hey guys I lost my directions already to my protank and I just bought it today, I think I actually left them inside the vapor store.

Well anyways my question is the suggested use on the protank I have a 2.5 ohm.
it was claiming I think to use ???? 4.2? volts I don't remember

But what is the wattage I am suppose to use on it because my vamo is set on watts not volts and I don't wanna burn out the coil/head really fast

I kinda like my protank on 8.0 watts I don't know if that's too many or not because I was enjoying 6.0 watts on my iclear 30

Thanks for anyone who replies back

I appreciate any help thanks guys

 

[Crocky]

Will depend a lot on the juice as well and your sweet spot and taste. I used 8 watts for most juices in the protank but I have to go down a tad with my ice fire elixir or it will punch my throat out....LOL

 

[john_at_large]

Here's a good power chart (you'll find a bunch of versions searching for "safe vaping chart."

Bonus points if you learn Ohm's Law (if you do, you might as well study for and get an amateur radio license while you're at it. Think you like to tinker now? Just wait...).

Hope it helps.

 

[Nev NYC]

Hmmm.. I would say fiddle with your settings a bit.. With a 2.5ohm head I'll start at 7.5w and adjust to taste.. I rarely go over 10w.. Some juices vape different.. For example, with me, sweet and fruity vapes taste burnt if I raise my power to high even with the correct power to ohm setting.. Tobacco juices seem to hold up better to power.. I prefer to keep my ohms under 2 with whatever atty or carto I use.. Adjust to taste if your using a VV or VW device.. If you're using a mech, then u need something with low resistance to get good performance.. Batteries also play a factor.. Fresh batteries are going to give you a better vape but depending on your device can also affect your flavor.. Just another thing is that Protanks heads usually have a bit of a break in period so if you're not getting good flavor on a juice you're used to, give it a few before u start chain vaping.. Make sure u take primer puffs once u fill with a new head..

 

[Leithan]

not much luck with the power chart but its a good start. I adjust to the juice and my taste. It should be easy to adjust your power settings with a Vamo, play around with it till you get the taste you want. I have been using nothing but my protank for the last week. I noticed the vape changed as I put more time on the head and needed me to up the power to get the same vape. It's a lot better now that I rebuild my own heads but the coil still gets crudded up and needs a bit more power to get the vape I want.

 

[MBX5]

7-8w seem best for me on most juice in the protank my stock coils all came in at 2.5-2.6ohm Above 8 I start to get a burnt/metal taste or harsh hits.

 

[MesaMitch]

Wow didn't think that many people would reply so fast!

Thanks guys and yeah 7-8 watts is pretty much where I like it
So I guess I'm doing the right thing then

I appreciate everyone's input
And yeah I bought this tank just for cinnamon because I love cinnamon vape so much and it was cracking my other tank.

Does anyone know where I can buy replacement heads at for really cheap?? Because my vapor store doesn't carry them.

I remember him saying that they use the same evod coil / head and just replace the post from the protank with the evod coil

Did anyone ever try this so I don't have to order heads for the protank online?

 

[Leithan]

try your hand at rebuilding them, I use 5 wraps of 32 guage Kanthal and a cotton wick. Plenty of tutorials on here and way easeyer than it looks. I havnt had the problems of my wick crapping out after a day like some others, I have one going strong after a week of heavy vaping. If you need some more help let me know and I'll post up my method.....wich I think is pretty close to what everyone else is doing

 

[MBX5]

Also building my own but http://www.kidneypuncher.com/kanger-pro-tank-atomizer-heads-5pk-2-5-ohms/ has a good price on stock ones if you want. Seems like most are around 7.00 for 5. I'm sure if you search you can find a deal every now and then.

 

[Discord]

I tend to run my ProTank on a VAMO around 7.5-8 watts. Some juices a little lower, some juices a little higher, wherever it tastes the best

 

[Devvon Collins]

Using the wattage on the vamo is easy. All wattage is, is a way for the device to calculate the resistance and change the voltage according. I usually set everything between 8.5 and 12.5