kayfun v5 with MTL reducer set (largest tube) - Airflow ring on 2 pips
2.5mm ID
UD Clapton Wire (26/32 gauge)
4/5 wraps giving about 0.6 - 0.8ohms
Dry-burn then quench about 8 times when coil is first fitted - just to clean out anything in the wire manufacture, between the clapton wraps
Cotton Bacon v2 fitting with easy movement within the coil
Tails cut to just reach the deck with an easy bend - fanned out along the juice deck
Clean easy vape for first half tank, which gets better as cotton breaks in
I have found the longer I don't touch anything - the better it gets
Best flavour is after 3-5 days - then it stays like this for another 5 days then suddenly drops off, and I re-cotton
At it's best the cotton looks pretty manky - dark and gunged - but flavour is extraordinary !!!!
My 2 regular setups - KFv5 and the Squape R(s) with the same build, using ProVape Radius around 23 watts
2.5mm ID
UD Clapton Wire (26/32 gauge)
4/5 wraps giving about 0.6 - 0.8ohms
Dry-burn then quench about 8 times when coil is first fitted - just to clean out anything in the wire manufacture, between the clapton wraps
Cotton Bacon v2 fitting with easy movement within the coil
Tails cut to just reach the deck with an easy bend - fanned out along the juice deck
Clean easy vape for first half tank, which gets better as cotton breaks in
I have found the longer I don't touch anything - the better it gets
Best flavour is after 3-5 days - then it stays like this for another 5 days then suddenly drops off, and I re-cotton
At it's best the cotton looks pretty manky - dark and gunged - but flavour is extraordinary !!!!
My 2 regular setups - KFv5 and the Squape R(s) with the same build, using ProVape Radius around 23 watts