if you decide to get a tobeco clone,,be sure to get the one that has the clear window,the first runs did not have the clear window and the threading is horrible in comparison to the 2nd run
kfl+=$99
ehpro kfl+ clone=$49
i'd say 1/2 price is a big difference especially when there is absolutley no difference in vape quality(yes, i have both). snapping off terminals is not the problem with the device it's the problem with the people doing the snapping. and yes, i think a lot of people don't know what they're doing... i have the real ones(kayfuns and russians) and all the clones and have never snapped a post off anything. guess i am just lucky, huh?
Is there any place that just sells replacement parts like the screws?
I was excited to receive one of the Kayfun Lite clones I've read about and picked up the Tobeco version off of eBay. Unfortunately one of the holes for the coil screws is stripped out and the screw doesn't engage at all, the screw literally just drops into the hole on that side. Anyone know if this is a common problem for these? Any fixes short of disassembling and re-tapping for a larger screw?
No. Provided the brass stock in question was certified Naval Brass (Lead Free). Most vapers don't trust brass from China. I know I don't trust Chinese brass.A question to a question: Would it pose a vaping hazard to manufacture the center post from brass stock?
snip one or more pieces of your coil wire the same length as the screw and drop them in the hole till the screw goes in tight. not a permanent fix but will make it usable.
I own the EHPro 3.1 and the HCigar 3.1 kayfun clones.
The EHPro was good out of the box but the threads are a pain to work with, especially the top cap and the cylinder that connects to the deck.
The HCigar had a horrible metallic taste that was an absolute bugger to get rid of, but the threads are absolutely fantastic and I prefer the finish. It's such a pleasure to work with in comparison to the EHPro.
I would definitely recommend the HCigar over the EHPro, provided you can get rid of the metallic taste with minimal effort
I own the EHPro 3.1 and the HCigar 3.1 kayfun clones.
The EHPro was good out of the box but the threads are a pain to work with, especially the top cap and the cylinder that connects to the deck.
The HCigar had a horrible metallic taste that was an absolute bugger to get rid of, but the threads are absolutely fantastic and I prefer the finish. It's such a pleasure to work with in comparison to the EHPro.
I would definitely recommend the HCigar over the EHPro, provided you can get rid of the metallic taste with minimal effort
After a very long wait over 1/6 of a year some vapemail came ToBreaCo KFL.
Thanks to everyone that replied to my posts, I am a noob with RBAs and need to order supplies to start coiling and configs.
What would be the recommended stuff to order Kanthal (what awg/mm), Mesh?, Steel Rope? And Ekowool (2mm, 2.5mm? Etc), Silica? (Size mm), cotton (where to get this from?)
I am hoping to try out as many configs as a noob can and would like to order supplies together.
Any help would be appreciated, going to order before midnight tonight (UK)
Vape on!
Sent from my iPhone using Tapatalk
Four days would be overstated. Most likely three for your area.The day has come. I have ordered my Kayfun clone from Luxor Vapes. it is an HCIGAR. Now the wait begins. Will let yall know how it turns out when it gets here. Hope i can get the build on it right. this will be fun. I cant wait. Hope it gets here soon.