Kayfun LITE - Part 2
- Thread starter Dusty_D
- Start date
- th_trl_thread_readers 0
- Status
Hi 
Boiling my KFL+ now and going to fill it with a coconut liquid. Would like to use the plastic tank, but will it withstand coconut?
Coconut got a PH of 5.5 - 7.8 I read while lemon got below 3, so I guess it will be ok.
Boiling my KFL+ now and going to fill it with a coconut liquid. Would like to use the plastic tank, but will it withstand coconut?
Coconut got a PH of 5.5 - 7.8 I read while lemon got below 3, so I guess it will be ok.
Last edited:
I believe it does. I think they fit everything from the 3.1 on to be honest. I have a bunch of the cheap FT poly tanks and they fit every Kayfun I have except the V4.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Fasttech has a bunch of stuff that fits the Kayfun. Cheap too, some made cheaply but most of them are OK. After all how expensive can it be to make a poly tank?
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
https://www.fasttech.com/p/1663600
https://www.fasttech.com/p/1662304
I bought 5 of each at that price.
They actually sell 5 and 10 packs of them now. Just need to look around a bit in their site. They also have a pretty good mobile app for Android now at the Play Store.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
You know who has those too.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Hello everyone, My KayfunLite is consuming too much juice compared to other tanks. Is that the nature of the tank, or is there something I can do. Reducing the air hole helps a bit, but not by that much. I am using the nano version at 2 ohms and 4 volts, wicked with minimum amount of cotton.
Your other tanks are not working right. If it's wicking well, you will use juice. That is what it's supposed to do. Enjoy!
Are you saying then that I am unlikely to affect the juice consumption by going from a large diameter to a smaller one while keeping the ohms the same? What about the effect of using more wick? I suppose I could find the answers for myself, but we are all lazy creatures hoping someone may already have the answers ...
Last edited:
You're using a Nano at 8W. How long does it last you? Your wick size etc does not necessarily come into play.
I go through almost a fullsize tank in a day if that's the only juice I'm using. I run it at 10W.
Normal..
Heck, I go through a couple or three tanks per day. Vaping 12mg in either a Kayfun Lite V2+ or my new V4. 9 wraps of 28ga kanthal on a 2.25mm drill bit. 1.5 ohms at 14+ watts. Great vape. I am a chain vapor so I guess you might say I haven't gotten over my nic addiction! I post this pretty much to tell you that no matter how you vape and how much all that really matters is you like it and your not smoking. Enjoy my friend.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
I go through 2.5 ml in half a day where the same amount would last a minimum of one day in a carto tank. The upside is, I am now getting more flavor and a better vape. Thank you guys both for the heads up.
You did not just compare a Kayfun to a Carto tank..
I'm kidding. You're doing just fine bud. The "more flavour and a better vape" is because you're now providing the right amount of juice to the wick/coil.
Hey Mr dusty, thanks for shooting me that email and concerns. Anyways I'm back and feel so out of touch, need to catch up on things for sure.
We're not talking about clones and authentics anymore. They're all just KFL's.. and that is the biggest bit of news since you left. Right guys?!!
Welcome back, Divrr.
Wow! I'm vaping 12mg on my KFL at 1.6 ohms and 9-10 watts and after a few puffs I already get a bit of a dizzy feeling. I've been wondering if 12mg is too much and if I should drop down to 6 so I can keep up the vaping more often without that dizziness. It may be because I went from a poor hitting Protank2 (lots of gurgling and popping issues) to a KFL that has been really solid so far now that I've worked out the leaking issue.
hi guys! I don't know if this is the proper thread to ask for but I'm using my kfl+for 9 months already. i love it and i never replaced it with any other atty. now i'm ready to try other rta (take note, "try"not to replace my beloved kfl+ ) and i'm thinking of getting a kanger subtank mini, with the rba base. does anyone here used the kanger subtank mini rba base? how is't compared to kfl+? thanks in advanced guys!
) and i'm thinking of getting a kanger subtank mini, with the rba base. does anyone here used the kanger subtank mini rba base? how is't compared to kfl+? thanks in advanced guys!- Status
Similar threads
