Kayfun LITE - Part 2

[Exchaner]

If you ordered from Provape, they will take care of you. If not, I hope whoever you bought from will help you out.

They did respond, and very promptly I might add. Thanks for pointing out my mistake. I might go for the full size because they no longer make the mini in Titanium.

Thanks for the concern Robinowitz, but it was only a small mix up. You were trying to help, and I do appreciate that.

 

[HBcorpse]

They did respond, and very promptly I might add. Thanks for pointing out my mistake. I might go for the full size because they no longer make the mini in Titanium.

Thanks for the concern Robinowitz, but it was only a small mix up. You were trying to help, and I do appreciate that.

I was gonna say just pull out of that purchase and put all that money towards a titanium P3...
It's worth the extra money...

 

[k2zs]

I'm looking for suggestions on where to find those chimney rings with graphics etched into them. Would also be interested in finding custom top caps in stock somewhere, any suggestions?

 

[TrollDragon]

I'm looking for suggestions on where to find those chimney rings with graphics etched into them. Would also be interested in finding custom top caps in stock somewhere, any suggestions?

You will find all you need on FT.
Chimney
Top Cap

Or if you are looking for some nice gear, have a look at Steam Tuners.

 

[MattB101]

What's so bad about the Nic? I hear it really isn't bad for us. When I hear that it is in fact bad for us in the amount we use, I'll use 0 nic.

I'm with you. I'm vaping 10 to 12 and have no real intentions to go lower till I have too. I have enough nic in the freezer to pretty much survive to a ripe old age without ordering any more. Might get another liter or two when MFS has it on sale and just go into "underground" sales when the nanny government steps in and outlaws it!

Sent while sitting on my busted ..... Stay off the ice if you can't skate. I can't and didn't.

 

[MattB101]

?????

The Vamo in 18350 mode is 4 1/8 inch long
The SVD 2.0 in 18350 mode is 4 1/2 inch long[emoji14]ervy:

18350 batteries last me about and hour and a half, can't use them, to many changes during the course of the day. Thinking about an istick but, really don't stealth vape so it doesn't really matter. Right now I'm using an IPV3.

Sent while sitting on my busted ..... Stay off the ice if you can't skate. I can't and didn't.

 

[MattB101]

Well, then maybe the SVD2 is for you. It has the eGo adapter built in, which of course, adds to the length, but it is there. I don't know.. It's an old piece already, made for a different market, but for that price why not. They still sell it here for over 120 bucks [emoji13]

R

The new ones come with the Ego adapter which is removable. Kind of nice.

Sent while sitting on my busted ..... Stay off the ice if you can't skate. I can't and didn't.

 

[MattB101]

Anyone see this?!

$26.70 Kayfun V6 Styled RTA Rebuildable Tank Atomizer (5ml) - stainless steel + glass / black at FastTech - Worldwide Free Shipping

It's like Sub tank, meet Kayfun!

Somebody over there is getting smarter. I like the air control. I wonder if the air hole to the build deck is bigger.

Sent while sitting on my busted ..... Stay off the ice if you can't skate. I can't and didn't.

 

[MattB101]

I think it's just a make-believe pile of garbage...
I almost want to order one, just so I can have something to laugh at! Or as a gag gift for a friend!

Just curious why you would think that? China not capable of a new idea? Normally not Fasttech but, hey even a blind squirrel finds the occasional nut.

Sent while sitting on my busted ..... Stay off the ice if you can't skate. I can't and didn't.

 

[Robinowitz]

I'm looking for suggestions on where to find those chimney rings with graphics etched into them. Would also be interested in finding custom top caps in stock somewhere, any suggestions?

Don't know if these are too simple for your taste. I really like the low profile (drop cqp) on that I got from them. (Made right there in your state even). Might be some other goodies too for you.
Rebuidable Atomizers - Kayfun Upgrades - Avid Vaper

 

[TrollDragon]

I would like to try out one of these, it would be nice to be able to dry burn and rewick the KFL without having to empty the tank.
KFL "Deck Access Kit"

 

[Exchaner]

I'm with you. I'm vaping 10 to 12 and have no real intentions to go lower till I have too. I have enough nic in the freezer to pretty much survive to a ripe old age without ordering any more. Might get another liter or two when MFS has it on sale and just go into "underground" sales when the nanny government steps in and outlaws it! ��

Sent while sitting on my busted ..... Stay off the ice if you can't skate. I can't and didn't. ��

I let my body guide me, and it's guiding me towards lower nic - the best indication that nic may not be the greatest thing. Of course YMMV.

 

[WillyZee]

I would like to try out one of these, it would be nice to be able to dry burn and rewick the KFL without having to empty the tank.
KFL "Deck Access Kit"

That company Steam Tuners out of Greece looks pretty cool

 

[HBcorpse]

I would like to try out one of these, it would be nice to be able to dry burn and rewick the KFL without having to empty the tank.
KFL "Deck Access Kit"

Yeah Steam Tuners is badass! I have some gear heading my way from them as we type!

But check this thing out!
http://www.cloud9vaping.co.uk/epage...bjectPath=/Shops/yxve46fvrnud/Products/KAYFIL
It serves dual purposes!!!
I own it, and love it!!!

 

[TrollDragon]

I totally forgot about the Kayfil, I'll have to pick one up.
Thanks!

 

[HBcorpse]

I totally forgot about the Kayfil, I'll have to pick one up.
Thanks!

For me, it has essentially turned my KFLs into KF4's...
The ability to access the deck without draining the tank was the top selling feature of the KF4 for me...followed closely by the P3 adapter. Glass tank was a close third, followed by better airflow, and "updated" build deck, tied for fourth.

 

[Pinggolfer]

For me, it has essentially turned my KFLs into KF4's...
The ability to access the deck without draining the tank was the top selling feature of the KF4 for me...followed closely by the P3 adapter. Glass tank was a close third, followed by better airflow, and "updated" build deck, tied for fourth.

Just to make sure this works on the Kayfun Lite V2?

 

[HBcorpse]

Just to make sure this works on the Kayfun Lite V2?

Works on every Kayfun but the Kayfun v4!
(It's also pictured on a Kayfun Lite in that link...)

 

[Pinggolfer]

Works on every Kayfun but the Kayfun v4!
(It's also pictured on a Kayfun Lite in that link...)

I watched the video and he said it works on all kayfuns which have the o'ring inside the top cap.

 

[LittleBird]

I watched the video and he said it works on all kayfuns which have the o'ring inside the top cap.

Very cool! With my stellar mechanical ability, I think I could make it work ....