Kayfun LITE - Part 2

[rbrylawski]

Yes...filling from the top is easy to do, but once in a while you'll get a little messy, either way you'll always need to purge whatever flooded the chamber by inverting and blowing it clear with a tissue or napkin handy, and on those rare occasions when I need to access the coil with a full tank it's easily sucked dry with an eye dropper or plastic nipple top bottle...but hey, that's the beauty of using Kayfuns...so many options to suit our fancy.

Exactly. I didn't get much juice through the air hole to begin with. But being new to the kayfun world, I wasn't really expecting any. It was very easy to purge it quickly and just vape on.

 

[WillyZee]

I don't mind filling my KFLs from the fill screw ... however, I am also extremely content with how the Lite v2+ works.

 

[Bronze]

I've filled my KFLs from the bottom so many times I do it without even knowing I'm doing it anymore.

 

[WillyZee]

I find it inconvenient to be taking juice with me to fill on the go ... I would rather just take a couple of devices already full.

I always bring a backup ... even though I've never really needed one.

 

[AndriaD]

I find it inconvenient to be taking juice with me to fill on the go ... I would rather just take a couple of devices already full.

I always bring a backup ... even though I've never really needed one.

That's pretty much what I've started doing, now that I have 4 kayfuns and 2 iStick30's... I just take the kayfun+iStick I'm using, and another one already filled and ready to vape of the same flavor; saves a great deal of fiddling around with vape gear when you're out doing other stuff. If I was going to be out longer, I could put the other 2 kayfuns on sigelei zmax's.

Andria

 

[TruSound]

I learned my lesson the hard way, I was working out of the country for a month and brought only one Kayfun with me thinking I'd be fine with just all my rebuild necessities...WRONG, I had one of the nano tanks on it and when I went to remove the tank for a rebuild the tank split at the threads, I used it as a dripper with no tank and the chimney was the drip tip...it worked but sucked.

Needless to say I take plenty of backup on the road these days.

 

[LittleBird]

@TruSound, do you use a bell cap on a KFL+? I have it in my head that I want one because they look pretty (what can I say ... I'm a girl! ), but don't know anyone who has used them.

 

[Pinggolfer]

@TruSound, do you use a bell cap on a KFL+? I have it in my head that I want one because they look pretty (what can I say ... I'm a girl! ), but don't know anyone who has used them.

Are these what you are looking for LB?

Kayfun Bell Cap by 1Q Vape | The Vape Source

 

[TrollDragon]

Or the FT versions.
My Tapatalk didn't post the picture...

 

[Grrrr]

A couple of really neat plasma glass tanks for the Kayfun made by Trippy Tips who have their own thread in the modders part of the forum. These tanks are full glass including the chimney part, you can unscrew from the base and access your deck without loosing juice, it's also easy to fill.

Full size Plasma Tank

Medium size Plasma tank

 

[TruSound]

@TruSound, do you use a bell cap on a KFL+? I have it in my head that I want one because they look pretty (what can I say ... I'm a girl! ), but don't know anyone who has used them.

I have the two you see here, 1QVapes and a no name flat top that I can't seem to find any more of, check the link that PingGolfer posted, I believe they're on sale for 10 bucks...and they have girly colors also, they come frosted and require polishing if desired.

 

[osso1]

Deal of the Day
BLOWOUT: KAYFUN CLONE RTA - $5.37 SHIPPED FROM THE USA

VaporBeast - Vaping Supplies, Electronic Cigarettes, E-Liquid

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $5.37

 

[Pinggolfer]

Wow

 

[HDMontana]

Put of stock now. Not surprising, at that price.

HD

 

[KTMRider]

If you guys (and gals) want a deal on a clone atomizer, Vapor Range has a Tobeco KF v4 for $9.95 shipped. For those not following the KF v4 thread, the Tobeco is one of the best clone of the KF v4. I have 4 of them (7 KF v4's total), 2 ordered from VR.

Tobeco Kayfun 4 V4 RBA Rebuildable Atty

 

[rbrylawski]

If you guys (and gals) want a deal on a clone atomizer, Vapor Range has a Tobeco KF v4 for $9.95 shipped. For those not following the KF v4 thread, the Tobeco is one of the best clone of the KF v4. I have 4 of them (7 KF v4's total), 2 ordered from VR.

Tobeco Kayfun 4 V4 RBA Rebuildable Atty

I know this may not be the place for this, but I do have a significant issue with Tobeco putting SvoeMesto's logo on this clone. Make a clone, OK. Use the real manufacturers logo, not OK.

 

[TrollDragon]

Well it is not all Tobeco. Here are 610 suppliers of a Kayfun V4 style atomizer, I am not sure how many do their own machining but they all have the logo...
Kayfun 4 Suppliers - Reliable Kayfun 4 Suppliers and Manufacturers at Alibaba.com

 

[rbrylawski]

Well it is not all Tobeco. Here are 610 suppliers of a Kayfun V4 style atomizer, I am not sure how many do their own machining but they all have the logo...
Kayfun 4 Suppliers - Reliable Kayfun 4 Suppliers and Manufacturers at Alibaba.com

I don't mean to imply Tobeco is the only one. I have an issue with anyone using the SvoeMesto name on their RBA, other than of course SvoeMesto.

 

[WillyZee]

Counterfeiters love the Kayfuns

 

[Pinggolfer]

Well it is not all Tobeco. Here are 610 suppliers of a Kayfun V4 style atomizer, I am not sure how many do their own machining but they all have the logo...
Kayfun 4 Suppliers - Reliable Kayfun 4 Suppliers and Manufacturers at Alibaba.com

Is this the company who makes the Tobeco or a clone of the clone company?

http://www.alibaba.com/product-detail/2015-Tobeco-factory-lowest-price-original_60139401455.html