Kayfun LITE - Part 2
- Thread starter Dusty_D
- Start date
- th_trl_thread_readers 0
- Status
I notice the center post in that replacement base does not come out to form a ridge on the deck. Doesn't that cause a leak by making it easier for juice to go down the hole? I had this problem with my Magma RDA.
Hey Matt!
The Kayfun Mini 2.1 is where I got the long piece of 5mm SS tubing from. Cut the chimney top off and smooth the rough edges with some emery cloth. The Long chimney on the Mini allows all three tank sections to be used, I ran with that setup quite a few times but ended up liking and using the regular two section chimney more.
The Kayfun Mini 2.1 is a nice little tank if you don't have one in your collection. (Warning! Tiny Build Deck
)
$17.32 Kayfun Mini V2.1 ES Styled Rebuildable Tank Atomizer Kit (1.6-4.0ml) - stainless steel at FastTech - Worldwide Free Shipping
This is a nano chimney top for the demonstration as all my regular ones are in use.
The attachment tube is a small piece of hard opaque PTFE tubing that is sold in most hardware stores. I believe it is a piece with a 3/16" ID that fits nice and snug.
Here is a long chimney top if you don't have any spares.
$1.41 Kayfun Nano RTA Replacement Stainless Steel Long Chimney - 20.2mm at FastTech - Worldwide Free Shipping
The Bell Cap
$1.69 Acrylic Kayfun Bell Cap at FastTech - Worldwide Free Shipping
The bottom tank, you can use the shorter Kayfun V4 version or a 5 Pawns one.
$1.28 Replacement Acrylic Tank for Kayfun V4 - translucent at FastTech - Worldwide Free Shipping
M Tanks can be used but I like to keep the chimney top and tubing butted up together and you might have to use a longer piece of tubing with the M Tank. You can run the tubing right from the chimney top up and out the bell cap hole if you want but I didn't like the look of it.
Depending on your tank configuration there could be a section of the chimney tube sticking out of the bell cap. Kayfun drip tips that have the 5mm+ bottom bore will fit over that perfectly.
The tank joiner is just a SS middle section that I put a FT Vapeband on and it hides the PTFE tubing section.
With a little tinkering and depending on your stock of assorted Kayfun parts, it should prove to be a nice easy conversion.
Very well met my fellow traveler, there is always help for the window sun!
The Kayfun Mini 2.1 is where I got the long piece of 5mm SS tubing from. Cut the chimney top off and smooth the rough edges with some emery cloth. The Long chimney on the Mini allows all three tank sections to be used, I ran with that setup quite a few times but ended up liking and using the regular two section chimney more.
The Kayfun Mini 2.1 is a nice little tank if you don't have one in your collection. (Warning! Tiny Build Deck
)$17.32 Kayfun Mini V2.1 ES Styled Rebuildable Tank Atomizer Kit (1.6-4.0ml) - stainless steel at FastTech - Worldwide Free Shipping
This is a nano chimney top for the demonstration as all my regular ones are in use.
The attachment tube is a small piece of hard opaque PTFE tubing that is sold in most hardware stores. I believe it is a piece with a 3/16" ID that fits nice and snug.
Here is a long chimney top if you don't have any spares.
$1.41 Kayfun Nano RTA Replacement Stainless Steel Long Chimney - 20.2mm at FastTech - Worldwide Free Shipping
The Bell Cap
$1.69 Acrylic Kayfun Bell Cap at FastTech - Worldwide Free Shipping
The bottom tank, you can use the shorter Kayfun V4 version or a 5 Pawns one.
$1.28 Replacement Acrylic Tank for Kayfun V4 - translucent at FastTech - Worldwide Free Shipping
M Tanks can be used but I like to keep the chimney top and tubing butted up together and you might have to use a longer piece of tubing with the M Tank. You can run the tubing right from the chimney top up and out the bell cap hole if you want but I didn't like the look of it.
Depending on your tank configuration there could be a section of the chimney tube sticking out of the bell cap. Kayfun drip tips that have the 5mm+ bottom bore will fit over that perfectly.
The tank joiner is just a SS middle section that I put a FT Vapeband on and it hides the PTFE tubing section.
With a little tinkering and depending on your stock of assorted Kayfun parts, it should prove to be a nice easy conversion.
Very well met my fellow traveler, there is always help for the window sun!
Last edited:
I realize you're in Canada... but where on earth does one find emery cloth? I've looked at Home Depot, they don't carry it.
Andria
In the plumbing area has some Emery cloth.
I realize you're in Canada... but where on earth does one find emery cloth? I've looked at Home Depot, they don't carry it.
Andria
Thx! I've had a couple of things that could really have benefitted from emery cloth, but never could find any.
Andria
Ask one of the 10,000 employees who ask if you need any help every 30 seconds.I realize you're in Canada... but where on earth does one find emery cloth? I've looked at Home Depot, they don't carry it.
Andria
That never happens to us... but then, my husband looks like a cross between Willie Nelson and Charles Manson on a bad hair day, so maybe that's why...
Andria
Lol, Got any pics of that look???That never happens to us... but then, my husband looks like a cross between Willie Nelson and Charles Manson on a bad hair day, so maybe that's why...
Andria
I couldn't find any really good pics in my collection... so I went into his room and said "Hey!" and got him to look at me.
My better half.
Andria
My better half.
Andria
He does... LMAO too funny AndriaI couldn't find any really good pics in my collection... so I went into his room and said "Hey!" and got him to look at me.
View attachment 504930
My better half.
Andria
Yep.. about 28 yrs ago, in a bar, someone walked up to him and said "uhh.. are you Charles Manson?" Swear to god! I told him he should have said YES! But just a few months ago, someone walked up to him in a Hardees and asked if he could take a selfie with my husband, to show his friends he'd met Willie Nelson.. or least someone who looks just like him!
I call him "Willie Manson".
A few years after we got together, when he was still in his 30s, I watched "Helter Skelter"... and Steve Railsback doesn't look anything like Manson, next to my husband! He's got those "crazy eyes." Andria
Ace Hardware has a complete assortment in their sandpaper section. Normally on the bottom shelf of course.I realize you're in Canada... but where on earth does one find emery cloth? I've looked at Home Depot, they don't carry it.
Andria
Ace Hardware has a complete assortment in their sandpaper section. Normally on the bottom shelf of course.
Thx, that's good to know! I think my husband knows where the nearest one of those is!
Andria
Every time I see your picture Andrea, it reminds me the one you posted of your husband. it makes me double over laughing
Funny part is, Manson would not be such a bad looking guy if he wasn't so evil. I'm sure your hubby is quite different though.
Funny part is, Manson would not be such a bad looking guy if he wasn't so evil. I'm sure your hubby is quite different though.
Every time I see your picture Andrea, it reminds me the one you posted of your husband. it makes me double over laughing
Funny part is, Manson would not be such a bad looking guy if he wasn't so evil. I'm sure your hubby is quite different though.
You're right! He's got a hell of a bark... I call him my "sheep in wolf's clothing." Though he's about as far from a sheep as it's possible to get, WITHOUT being that wolf. I suppose, factually, he's more "ethical sensitive modern male in biker's clothing" than anything else.
An anti-intellectual with a near-genius IQ. You would never imagine his depths, just from looking at him or having a casual conversation. I've had partners who were abusive in various ways... there's a lot of GOOD reasons why I've been with my husband for over 29 yrs. 
And somehow he manages to put up with me, too. Andria
- Status
Similar threads
