oh well ....
You can still get on the reserve list. There are only 5 people on it.
- Status
You can still get on the reserve list. There are only 5 people on it.
Not entirely sure, I'm going to play around with it though.
If you look at this pic.. It seems the adapter can be removed. So I'd just use the one that was made for the Killer ... as long as it fits!
It's my understanding they leak if you don't use theirs. Wonder if you use theirs and add the killer's....
I'll figure it out.
And unfortunately, it won't be tonight. USPS was doing their thing and instead of sending my package to the closer sort facility (closer to the last facility AND closer to me), they sent it to a random facility in NC. Oh well. Tomorrow, then.
Okay, so this AGR tank has the Killer performing FLAWLESSLY.
I'm really excited to get the Kir Fanis tank, because there are some extremely annoying things about this AGR that make it really hard to use the Killer.
Everything screws together. Every single thing. So trying to adjust the juice control is like trying to pass a jobs bill through Congress.
Gotta remove the airflow control thing on the bottom to adjust the juice control by the threads on the bottom. Don't forget, the bottom cap of the tank is threaded, so you gotta pay attention and make sure you don't end up wearing a lap full of juice.
Can't use it without the airflow control thing, because the bottom cap of the tank is flanged so your Killer won't slide down -- it's not making contact.
So to fill it, I have to take off the bottom airflow control thing. Close the juice control on the Killer. (Re-attach the airflow control so it doesn't leak? Maybe? Don't know yet.) Remove the top screw and refill. Put top screw back in. (Remove airflow control?) Reopen juice control. (Screw on airflow thing?) Reattach to your PV.
... man.
This would be awesome if everything didn't screw together. And if the bottom cap weren't flanged.
But, again, perfect performance. There are tradeoffs in life I guess.
Until my Kir Fanis gets here.
Oh yeah and in my initial fill, I ended up dumping a crap load of juice. No idea what happened there.
But so far no leaks, and I replaced the giant airflow control with a smaller one I bought elsewhere, so it's not like 4 inches tall.
I'm really excited to get the Kir Fanis tank, because there are some extremely annoying things about this AGR that make it really hard to use the Killer.
Everything screws together. Every single thing. So trying to adjust the juice control is like trying to pass a jobs bill through Congress.
Gotta remove the airflow control thing on the bottom to adjust the juice control by the threads on the bottom. Don't forget, the bottom cap of the tank is threaded, so you gotta pay attention and make sure you don't end up wearing a lap full of juice.
Can't use it without the airflow control thing, because the bottom cap of the tank is flanged so your Killer won't slide down -- it's not making contact.
So to fill it, I have to take off the bottom airflow control thing. Close the juice control on the Killer. (Re-attach the airflow control so it doesn't leak? Maybe? Don't know yet.) Remove the top screw and refill. Put top screw back in. (Remove airflow control?) Reopen juice control. (Screw on airflow thing?) Reattach to your PV.
... man.
This would be awesome if everything didn't screw together. And if the bottom cap weren't flanged.
But, again, perfect performance. There are tradeoffs in life I guess.
Until my Kir Fanis gets here.
Oh yeah and in my initial fill, I ended up dumping a crap load of juice. No idea what happened there.
But so far no leaks, and I replaced the giant airflow control with a smaller one I bought elsewhere, so it's not like 4 inches tall.
Last edited:
Okay, so this AGR tank has the Killer performing FLAWLESSLY.
I'm really excited to get the Kir Fanis tank, because there are some extremely annoying things about this AGR that make it really hard to use the Killer.
Everything screws together. Every single thing. So trying to adjust the juice control is like trying to pass a jobs bill through Congress.
Gotta remove the airflow control thing on the bottom to adjust the juice control by the threads on the bottom. Don't forget, the bottom cap of the tank is threaded, so you gotta pay attention and make sure you don't end up wearing a lap full of juice.
Can't use it without the airflow control thing, because the bottom cap of the tank is flanged so your Killer won't slide down -- it's not making contact.
So to fill it, I have to take off the bottom airflow control thing. Close the juice control on the Killer. (Re-attach the airflow control so it doesn't leak? Maybe? Don't know yet.) Remove the top screw and refill. Put top screw back in. (Remove airflow control?) Reopen juice control. (Screw on airflow thing?) Reattach to your PV.
... man.
This would be awesome if everything didn't screw together. And if the bottom cap weren't flanged.
But, again, perfect performance. There are tradeoffs in life I guess.
Until my Kir Fanis gets here.
Oh yeah and in my initial fill, I ended up dumping a crap load of juice. No idea what happened there.
But so far no leaks, and I replaced the giant airflow control with a smaller one I bought elsewhere, so it's not like 4 inches tall.
Gez, this is depressing. My favorite tanks are the Phiniac (tops cap it very hard to get off) and the AGR (and now this problem).
Ok, setting the juice control problem aside, why can't you just fill it by unscrewing the top cap on the AGR?
Gez, this is depressing. My favorite tanks are the Phiniac (tops cap it very hard to get off) and the AGR (and now this problem).
Ok, setting the juice control problem aside, why can't you just fill it by unscrewing the top cap on the AGR?
The Phiniac works great! It's just the refilling that isn't fun (can't use the fill tool). Once I got the airlock right with the pressurizing puff or whatever we're going to call it... it was pretty good.
I do fill the AGR with the top screw. But you gotta close the juice control before you fill or you'll flood. Hence, all those steps.
It's just a minor annoyance to get it done. Once I did it a couple times I realized it wasn't that bad, and doesn't actually take too long. And it performs like a dream! Just play around with your tanks. I'm sure you'll find a setup to make you happy.
The Phiniac works great! It's just the refilling that isn't fun (can't use the fill tool). Once I got the airlock right with the pressurizing puff or whatever we're going to call it... it was pretty good.
I do fill the AGR with the top screw. But you gotta close the juice control before you fill or you'll flood. Hence, all those steps.
It's just a minor annoyance to get it done. Once I did it a couple times I realized it wasn't that bad, and doesn't actually take too long. And it performs like a dream! Just play around with your tanks. I'm sure you'll find a setup to make you happy.
It sounds like more than just an annoyance.
I don't have any other good tanks to try the killer on so I guess I better start strengthening my thumbs to get that Phiniac top cap off. 
What tank is that? I really really like it
It's the AGR tank. There is a co-op going on right now for these but it's full. BUT....one guy ordered 10 of these and he hasn't paid yet and if he doesn't they are going to be available so I would get on the reserve list if you are interested. They are on $8 + shipping and incidentals. http://www.e-cigarette-forum.com/fo...to-punch-igo-l-igo-s-aga-s-round-2-co-op.html
Payment is through Popmoney only, so if your interested you need to sign up for a Popmoney account now.
I don't really know for sure but I think so. They have some weight to them. Discount Vapors says they are stainless.
AGR Tank - Stainless
Killers finally arrived. Picked up today. Not sure when I'll have time to play though. Since no one has reported using them on bottom feeders first thing I'll try is on REOs.
Feisty Alice
Sent from my SPH-L900 using Tapatalk 2
Feisty Alice
Sent from my SPH-L900 using Tapatalk 2
It's the same one. It comes with a small tube and a lg tube. Don't know the ml.
Hey Alice, Be sure to let us know how it works out as a bottom feeder. I wasn't aware that it was.
GV Telescopic tank
This is one of those things that I'll need to see it working flawlessly with the Killer before I purchase it...
- Status
Similar threads
