Lambo 4.0 trouble

[bulldog63h]

I'm having trouble with my Lambo. When it gets jarred it shuts off. I can hear the battery hit the top. I assume it's compressing the spring and opening the circuit. I have to jar it again or unscrew the bottom and screw it back on to get it to work again. I'm using the 65mm 18650's. Does anyone have any idea of how to fix this?

 

[AnsonJames]

Are you using flat top batteries?

 

[bulldog63h]

Yeah. Should i get a button top and try that?

 

[haiqu]

Sounds like the battery is jamming in the cylinder. The battery should return to the top by spring pressure unless it's wedged in tight.

 

[AnsonJames]

Yeah. Should i get a button top and try that?

Could be your problem.

 

[Thorbear]

I use a button top aw imr battery, and I have the same issues. I use it only at home so it doesn't bother me that much, But I do find I have to open and close the battery compartment a few times sometimes to get it to work.

Sent from my Galaxy Nexus using Tapatalk 2

 

[steved5600]

Well I have a special high wattage soldering iron and had to make a button on one but I don't recommended doing that unless you have the skill and iron to do the job. Some buy small rare earth magnets and put that on the end of the battery but they can slip and git into the controller. Best thing is to make sure you get a button top battery and clean your contacts with a swab and alcohol including the center post on the PV. I had to do that on my Provari recently some how stuff gets in there. Keep the contacts on the battery clean and make sure the pressure spring has not gotten compressed.