Hold the presses, I just tried it again and it worked! Didn't like what I saw, but it worked.
LOL! That was MY reaction too. 3.8 volts unloaded. 3.5 volts loaded.
Cowboy, thanks for the tip.
Hold the presses, I just tried it again and it worked! Didn't like what I saw, but it worked.
orachel said:Hey, could you maybe tell everyone hi, and that since I'm not monitoring threads like i usually do, if anyone needs me, pm is about the best way to get me. I'm trying to check email a few x a day come heck or high water, though. Miss you guys!
No, well yes if you want! But it is NOT needed!
Here is how to use the Vivi Nova V2 (air hole above the 510 threads, not on knurled ring that makes up bottom of tank) with the chrome or SS Lavatube (L-Rider V2) WITHOUT an adapter (510-510 shorty) or 3.5ml tank cone.
You should only need to follow these directions once. After that you will know where to point.
1, put a mark on the lower knurled bottom ring of the tank (I used a Sharpie) directly over the air hole.
2. screw the knurled bottom ring on to (or actually into) the Lava Tube (Vtube) firmly but not tighter than where it stops.
3. either mark the place where the first mark rests on the top of the LT or (if your lucky) it will line up with a button.
4. simply turn the slit (groove?) in the brass colored center pin to that mark (or place).
Now you should have perfect air flow. Mine is not too tight, not too airy. Each time you want to put your tank on your LT simply turn that slit to the same spot. If you used a mark you will soon learn where the spot is in reference to something. For instance my spot is approx. 1/8 inch to the right of the right edge of the fire button.
OR use an adapter or tank cone. But I knew it could be done!!
I couldn't get that to work either, but then my brass pin moved off the mark when I unscrewed it anyhow. So it wouldn't stay. Unless I'm totally misunderstanding something. But I do have an adapter now, so my vivi is working.
I couldn't get that to work either, but then my brass pin moved off the mark when I unscrewed it anyhow. So it wouldn't stay. Unless I'm totally misunderstanding something. But I do have an adapter now, so my vivi is working.
Oh, BTW, Errol, if you're around.. those modified Phoenix bottom coils... you just drop a few drops on those like an atty, I'm guessing? Figured I'd better ask before I messed em up. VERY cool mod, BTW!!! If they work anything like reg phoenix bc's only for tasting, I'm a convert. Thanks so much!
Can anyone help me with my LT mod?? My threads are stripped and mucked up......I want to know if there's anyone in here that can repalce the ego 510 connection on the LT v2 chrome pv....please drop me a pm thank you guys!