Let's talk hardware

[bappo]

Yeah, that's it. Good movie, even if you don't like zombie movies.

How could one not like zombie movies, er, documentaries?

Tried the PeterK method of wrapping coils and just can't get it right. Just switched over the AC9 back to my normal, ugly, 4 wrap 28g hand coil and it is hitting properly. Pirate's Booty clouds

 

[Schnarph]

Bill Murray.

Adam is Mr Heather of Heather's Heavenly Vapes. He posts in their vendor thread as 1atom12.



edit: Heather's husband that is. He's the guy who does the tobacco extracting.

I am now one more step away from ignorance. I posted in the HHV vendor thread so I can find it again. Maybe you can tell me who signed my HHV receipt with a bubbly thank you and the letter K?
it wasn't Bill Murray...(Must to be a girl)

Zombieland starring Woody Harrelson.

You meant to say, starring Bill Murray?

How could one not like zombie movies, er, documentaries?

Tried the PeterK method of wrapping coils and just can't get it right. Just switched over the AC9 back to my normal, ugly, 4 wrap 28g hand coil and it is hitting properly. Pirate's Booty clouds

You would probably like my hand-guard spiked kukri, but I'm not going there right now, even if this is the 'Let's talk hardware' thread. It is used for it's intended purpose on a regular basis, whackin' big weeds and cleaning the smaller branches off trees I have cut, nothing too weird going on here.

Booty clouds, nice imagery. How about Booty fog? (Starring Bill Murray)

I really appreciate all of your advice, folks. I know this isn't the 'Let's help Schnarph figure out what he needs' thread'. You people are truly awesome.
Today I scrounged up enough dough to get 3 more 30ml bottles from HHV: DF, Huntsman, and Heavenly Army. If I get them by Friday they might get to steep a week or two before I run out of what I have.

Bill Murray.

 

[Chakris]

I got my REOMizer 2.0 RBA's last night. Been playing with them this morning. Only think I have to compare them to is a Hornet, which costs twice as much ($76 compared to $43). The 2.0 has alot more room inside, which is good for my dumb calloused fingers. The 2.0 hits a little airy as compared to the Hornet, but not so much as to be a problem. Construction obviously favors the Stainlees Steel Hornet, as the 2.0 is nickel-plated with a ceramic catchcup and a brass base. The posts on 2.0 are spread apart, which I like. Overall it is pretty good, and a decent cheaper option for anyone thinking of trying an RBA.

Say Papaw, that looks neat! Do you think one would work on a VMod XL? They look a lot easier to work with than the AGA-T2s.

 

[PapawBrett]

Say Papaw, that looks neat! Do you think one would work on a VMod XL? They look a lot easier to work with than the AGA-T2s.

I don't own a VMod or an AGA, so I really can't say.... sorry I can't give a better answer. I do know it's made for a 510 connection, and that Rob O'Niell had to increase the size of the catchcup on his Mods (slightly) to accomodate RBA's. He will custom make one. I've got a REOMizer 2.0 coming in that Rob 'shaved' the base to fit my older REOSmini. He goes by redeyedancer on the ECF, you could PM him or email through REOSMods website to get a more diffinitive answer if you wanted to...

 

[Chakris]

Thanks Papaw, I just might send him a PM, although I really can't afford any more gear right now. Mrs. Chak has been giving me the evil eye the last couple packages. She understands the consumable items, but she's got her eye trained on new mods and tanks.

 

[MrPicC]

Bill Murray.

I am now one more step away from ignorance. I posted in the HHV vendor thread so I can find it again. Maybe you can tell me who signed my HHV receipt with a bubbly thank you and the letter K?
it wasn't Bill Murray...(Must to be a girl)

KARI

http://www.e-cigarette-forum.com/forum/hhv-army/384926-heavenly-army-mug-shots-43.html#post9073568

 

[Dusty_D]

I'm going to forget anything bad that I've read about the Vapeonly BCC, because the one I have on my Evic is kicking my behind. As with most other wickable stuff that's making it's way out of China, I had to take off one of the "flavour wicks" for it to work right. I just got through my first full tank, and have to say that I am impressed thus far. It is on par with the ProTank right now with the exception being that it is made of plastic.

 

[Bronze]

I'm going to forget anything bad that I've read about the Vapeonly BCC, because the one I have on my Evic is kicking my behind. As with most other wickable stuff that's making it's way out of China, I had to take off one of the "flavour wicks" for it to work right. I just got through my first full tank, and have to say that I am impressed thus far. It is on par with the ProTank right now with the exception being that it is made of plastic.

Dust, did you see Adam is getting some Protanks in his gear lineup? VAMO's too.

 

[MrPicC]

Protanks will sell for sure! Vamos Don't follow~

 

[Bronze]

Protanks will sell for sure! Vamos Don't follow~

I love my VAMO MP. I use it as much as my Provari. And I actually like the variable wattage. Great for switching up feeders without fussing with it.

 

[MrPicC]

I love my VAMO MP. I use it as much as my Provari. And I actually like the variable wattage. Great for switching up feeders without fussing with it.

Oh I'm not dissing the vamo, i just don't own one so I'm not available to have a say.)

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Dusty_D]

Dust, did you see Adam is getting some Protanks in his gear lineup? VAMO's too.

Yeah, I saw his post about it. It's nice that folks will be able to pad their orders with "popular" hardware.

 

[*RJ*]

Bill Murray.

I am now one more step away from ignorance. I posted in the HHV vendor thread so I can find it again. Maybe you can tell me who signed my HHV receipt with a bubbly thank you and the letter K?
it wasn't Bill Murray...(Must to be a girl)

You meant to say, starring Bill Murray?

You would probably like my hand-guard spiked kukri, but I'm not going there right now, even if this is the 'Let's talk hardware' thread. It is used for it's intended purpose on a regular basis, whackin' big weeds and cleaning the smaller branches off trees I have cut, nothing too weird going on here.

Booty clouds, nice imagery. How about Booty fog? (Starring Bill Murray)

I really appreciate all of your advice, folks. I know this isn't the 'Let's help Schnarph figure out what he needs' thread'. You people are truly awesome.
Today I scrounged up enough dough to get 3 more 30ml bottles from HHV: DF, Huntsman, and Heavenly Army. If I get them by Friday they might get to steep a week or two before I run out of what I have.

Bill Murray.

EDIT reason "Bill Murray". That made me crack up!

 

[Chakris]

Yeah, I saw his post about it. It's nice that folks will be able to pad their orders with "popular" hardware.

Exactly what I plan to do - I'm pretty sure Adam's prices will be reasonable. It'd be nice to get the things on my wish list and restock juices all at one place. Been thinking about another Vamo for a while now and can always use another Protank or two.


EDIT: And why not throw in a "Bill Murray" just for Beckums.... *Chak waves his Bamboo Vamo* (ghost buster gear in rehab)

 

[smitighe]

How could one not like zombie movies, er, documentaries?

Tried the PeterK method of wrapping coils and just can't get it right. Just switched over the AC9 back to my normal, ugly, 4 wrap 28g hand coil and it is hitting properly. Pirate's Booty clouds

Yeah it's tough to do the petarK method is and get the wick just that size. But it does make a nice coil.


Sent from my iPhone 5 using Tapatalk

 

[XfooYen]

Yeah it's tough to do the petarK method is and get the wick just that size. But it does make a nice coil.

I did the PetarK method when I was first starting out with gennies. I've found that the method is a band-aid at best and very overrated. It's better to hand wrap the coil and pulse-power it to work out hot spots. As long as you don't wrap it too tightly, you'll always get a better setup because you're ensured to have total contact between the coil and the wick. The PetarK leaves tiny gaps which leads to burnt taste and hot spots that are hard to work out.

Oh I'm not dissing the vamo, i just don't own one so I'm not available to have a say.)

As much as I'm into mechs right now, I have 2 vamos which get used daily; one for my dripper and one for my carto-tanks. I only wish they would use the Nivel chip instead of the Chinese one so we could get filtered PWM.

 

[Pappy]

EDIT reason "Bill Murray". That made me crack up!

I wonder if saying Gunga Galunga would get me a "like" from Becky.

(That's a very obscure Caddyshack reference for those not in the know.)

 

[bappo]

Say Papaw, that looks neat! Do you think one would work on a VMod XL? They look a lot easier to work with than the AGA-T2s.

Chakris, I will save you some money. I know the Hornet and Reomizer 2.0 do not fit Vmods. The Vmod requires a 510 atty diameter device to fit down into the cup. Reo's have a wider open cup that accept RBA's. Course with Vmod's closed design they never ever leak. Ever. Just cant use an RBA. Stick with the Vapage or Avidvapes stuff.

 

[Blix]

Rocking Legend in a cartotank at 0.8ohms (yes 0.8) thanks to the Diver rebuildable, quite awesome!
Mod placed in from of one of my B&W prints, no Photoshop trickery.

 

[Dusty_D]

Rocking Legend in a cartotank at 0.8ohms (yes 0.8) thanks to the Diver rebuildable, quite awesome!
Mod placed in from of one of my B&W prints, no Photoshop trickery.

Very crisp image. Beautiful picture of a beautiful mod!