Let's talk hardware

[Bronze]

Bronze, you would love a kayfun Lite. Convenience of a DRA build, 3ml capacity, condensed flavor, and VV friendly. I love all kinds of devices. I've got tri-post drippers, gennys, DCTs, Protanks, HH357, Odysseus, Terminator, but none of them match the ease and vape quality as the kayfun. It is the best of all worlds for me. Sure, it's $100 but absolutely well worth the coin. If you ever consider gifting yourself a high-end device, I strongly recommend the K-lite.

I'm planning on breaking into a bank vault soon so I'll be able to order one of those Kayfuns. Thanks for the tip X.

 

[Bronze]

Hey General, question about your shifting resistances. Do you fire your wire before wrapping? I've never noticed a drastic shift in resistance when I wrap a coil unless there is a short somewhere in the system..

Yes Dust. I run my wire through the torch flame before winding. I'm certain I am getting good oxidation on my mesh as well. I torch it pretty good before rolling. Then I crease one end to make it smooth. Torch it again after it is rolled. Put on 3 - 4 coats of juice and burning in-between. I do it identical to Busardo's method. Not that it is better than anyone else's but it works (I think). We'll see where it goes in the next couple days. I'm sort of leaning with the gunk crew. Maybe this DF just cruds up fast.

 

[XfooYen]

I'm planning on breaking into a bank vault soon so I'll be able to order one of those Kayfuns. Thanks for the tip X.

When you do, order it from Intaste.de. It's the cheapest price and fastest shipping. Ended up $100 to my door in three days.

• from tapatalk •

 

[DantesInferno]

Actually, I find I have to rarely clean or dry burn my RBA's. I go a long, long time before I do. That was the best thing anyone has ever sent me MP.

I'm not sure I ever have. Taste starts getting funny or vapor starts to diminish I just throw on a new coil. You know I agree though I'd trade my genesis for my rda any day.

Sent from Galaxy Note 2 via Tapatalk 2.

 

[DantesInferno]

Yes Dust. I run my wire through the torch flame before winding. I'm certain I am getting good oxidation on my mesh as well. I torch it pretty good before rolling. Then I crease one end to make it smooth. Torch it again after it is rolled. Put on 3 - 4 coats of juice and burning in-between. I do it identical to Busardo's method. Not that it is better than anyone else's but it works (I think). We'll see where it goes in the next couple days. I'm sort of leaning with the gunk crew. Maybe this DF just cruds up fast.

Lmao. Oh how I hated doing all that. That was exactly why I never liked ss mesh. You could try some of that silica sleeving on the mesh. Gurantees the insulation that way. And since you like rdas like I do you also get a similar vape. Since the coils are still burning the juice right off of the silica like usual. Certainly been the most foolproof method I've tried.

Sent from Galaxy Note 2 via Tapatalk 2.

 

[Bronze]

Genny has been holding at 1.2 ohms. So far so good. Jury is still out though.

 

[DantesInferno]

Genny has been holding at 1.2 ohms. So far so good. Jury is still out though.

Lol. Agreed. Can't get off this dang rda. Even with my genny set up good it's still only maybe 90% of the rda. Gonna get my mod today so I'll throw a sub ohm genny on that and see. Congrats on keeping it going though.

Sent from Galaxy Note 2 via Tapatalk 2.

 

[MrPicC]

My favorite wire is bakero. It always just works and doesn't take much to get it all fired up immediately.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[*RJ*]

My favorite wire is bakero. It always just works and doesn't take much to get it all fired up immediately.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

mmmm....Serendipity....

Awesome collage of pictures! WTH is Bakero?

 

[MrPicC]

Ribbon wire and thanks
Actually I have no idea why I even started calling it that. Must Google.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[*RJ*]

Ribbon wire and thanks
Actually I have no idea why I even started calling it that. Must Google.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Bakero supposedly means peace and love to Japan. It seems it's been discussed on ECF for a while, introduced by a member called ziggy2fast. Ribbon wire...yep. I googled.

 

[MrPicC]

Yup I did also. From henceforth I'll be calling it ribbon only.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Chakris]

Haven't been doing much at all with my RBAs. No time to fiddle. I'm kinda upset with one of my Richmans - I took them apart to clean and rinse them out, while screwing the nut back onto the positive post it stripped the thread before it was even tight. I took the nut back off and tried the other and in doing so, noticed that both were real loose on the post, they would tilt up & down. I could almost pull it off without having to twist! It's like I got the wrong size nut for the post.

Writing a letter Richman to see what can be done about it.

 

[Blix]

Kayfun Lite is absolutely awesome, love mine!

3.1 will be sold soon....

 

[XfooYen]

Agreed. K-lite is the best. I'm keeping my 3.1 until my other lite arrives from Russia. Probably a couple months from what I've heard. I'm on the list for the kayfun conversion for the ody/term also. Who knows when that will come around.

• from tapatalk •

 

[Volcanoboy]

I've been enjoying my eBaron dripper lately. It really does bring out the flavors. Waiting for my K Lites still...

 

[Bronze]

So several fillups on my AGA-T+ and ohms are 1.3. Started 1.1/1.2 (toggled back and forth). Went up .1 basically. So looking good so far.

 

[XfooYen]

Could use some bump action from the army. I've quickly moved to page 4 for my EA classie sale.

Thanks, PicC for this morning's bump.

 

[Bronze]

Could use some bump action from the army. I've quickly moved to page 4 for my EA classie sale.

Thanks, PicC for this morning's bump.

Link us X and we'll bump the crap out of you.

 

[Blix]

K-Lite is da ...., and rocks on the Super T ELA!