Let's talk hardware

[MrPicC]

It works but there's a point in drilling where you get less clouds and I hit that point immediately.
I've been in a lot of pain for a few days so drilling while medicated wasn't a smart thing to begin with.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Bunnykiller]

All things being equal, I'd hire you.. But let's say, you created a custom fencing setup for $800 and then another company copied your design and undersold you for 1/2 price to your customer, would you be ok with it?!

Sent from my IdeaTab S6000-F using Tapatalk

if they could afford to do it.....

 

[Bunnykiller]

I'm so upset.. I drilled out my rm2 and like a fool way too big. Its unusable. Ordered a spare and have a brass one coming tomorrow but I hate having to spend money on my mistakes...

Sent from my SAMSUNG-SGH-I747 using Tapatalk

are you good with soldering?? refill the hole with silver based solder and carefully redrill...

 

[Bunnykiller]

It works but there's a point in drilling where you get less clouds and I hit that point immediately.
I've been in a lot of pain for a few days so drilling while medicated wasn't a smart thing to begin with.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

well when you slip with the drill you wont feel the results too bad

 

[Bunnykiller]

Finally got the right switch for the Vamech... works pretty good...

 

[MrPicC]

That picture Dont load ^ for me.


Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Bunnykiller]

That picture Dont load ^ for me.
View attachment 318352

Sent from my SAMSUNG-SGH-I747 using Tapatalk

reloaded the pic hopefully it works now...

 

[MrPicC]

Hey what did you do? Took electronics out?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Bunnykiller]

got some 28ga from Retic, recoiled the 3.1 with a vertical coil .050 ID 1.7 ohms ( 14 wraps) doing Temptation in it... pretty awesome vaping

 

[Bunnykiller]

Hey what did you do? Took electronics out?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

yup, the Vamo got dropped and died so I opened it up pulled the board and cut off the display window part, redrilled the hole for the switch and replaced the top cap...
now I have a "mech"

 

[retic1959]

BK, I don't blame you for purchasing the clones, but at the end of the day, they are still counterfeit products that are a slap in the face of hard working folk that have designed/created them. I'd rather not get into an ethics argument here but suffice to say that I support what Pappy is doing, where he has confirmed more than once that he likes the product and is now paying tribute to it's creator by purchasing an original.

Dusty , sometimes a slap to the face or a kick in the .... is necessary to give a company a dose of economic reality , the clones did just that with SM , I'm not gonna discuss ethics but I have little or no sympathy for companies that overcharge for a product , we'll never agree on this subject this is simply my feelings on the matter .

 

[Bunnykiller]

been reading about the locking rings on mechs becoming jammed and making the mod difficult to unlock.... maybe an o-ring between the body and locknut would solve that issue. Keeps the locknut from jamming into the body but still stops the button from activating...

 

[Chakris]

I'm so upset.. I drilled out my rm2 and like a fool way too big. Its unusable. Ordered a spare and have a brass one coming tomorrow but I hate having to spend money on my mistakes...

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I read BK's suggestion about soldering, which is good if you're good at soldering. However, I seem to remember XFooYen recommending some sort of epoxy or putty that was super strong and when dry was drill-able?

Where is X btw, has he been on the hardware thread much lately? I haven't.

 

[Bronze]

I read BK's suggestion about soldering, which is good if you're good at soldering. However, I seem to remember XFooYen recommending some sort of epoxy or putty that was super strong and when dry was drill-able?

Where is X btw, has he been on the hardware thread much lately? I haven't.

Probably JB Weld Chak.

 

[Pappy]

Probably JB Weld Chak.

That's what I was thinking too.

 

[smitighe]

Hey Bronze, got this GAIA loaded up and you were right. Like a suped up DH. There is a flavor in there I am trying to put my finger on. Not a bad vape for sure. Thx for the heads up on that one.


Sent from my iPhone 5 using Tapatalk

 

[MrPicC]

I read BK's suggestion about soldering, which is good if you're good at soldering. However, I seem to remember XFooYen recommending some sort of epoxy or putty that was super strong and when dry was drill-able?

Where is X btw, has he been on the hardware thread much lately? I haven't.

I'm good actually. Rob from reosmods has a adjustable air prototype thingy or something he's sending me. Plus I already received my third rm2 so no complaints.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[Chakris]

I read BK's suggestion about soldering, which is good if you're good at soldering. However, I seem to remember XFooYen recommending some sort of epoxy or putty that was super strong and when dry was drill-able?

Where is X btw, has he been on the hardware thread much lately? I haven't.

Probably JB Weld Chak.

That's what I was thinking too.

Thanks guys. Whatever it is, he used it on just such occasion.

 

[Chakris]

I'm good actually. Rob from reosmods has a adjustable air prototype thingy or something he's sending me. Plus I already received my third rm2 so no complaints.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

That's cool. Beta testing is fun, sometimes...

 

[Bunnykiller]

Thanks guys. Whatever it is, he used it on just such occasion.

JB Weld would work too but it has such an odd color... be sure to get the "Engine Block" type... holds up to oils and heat.