Lets talk ZNA 30

[eda123]

So those of you that have switched tubes.... so you find the tubes easy to screw on or there is some effort involved? Mine are pretty tight..... just curious..

mine is tight, takes some effort. Feels almost like the threads are catching just a little or something. Not a big deal for me.

 

[frazz]

mine is tight, takes some effort. Feels almost like the threads are catching just a little or something. Not a big deal for me.

Mine seems the same. If it is the norm, I won't worry about it. I see many videos on devices that talk about "buttery" threads....I am thinking this not it...lol

 

[devauto]

Devauto, give house of hybrids a call. He will totally take care of you if your zna is acting up

Thanks for the info ... I did call him today, the man truly cares about his customers! I gotta ship it back to him as soon as I can and he will fix it all up!

 

[frazz]

--------------------UPDATE---------------------

Within 30 minutes of posting this, my ZNA has started to auto adjust upwards to 30, every single time I put a battery in it. The only thing I have found that will stop it from constantly climbing is to lock the settings on the device as quick as possible. Of course as soon as I unlock it, it starts rising again... It seems that there is a problem with the button itself, even when I get it to stop rising, simple touching the side of the button causes it to start climbing again. I am at wits end with this device right now!

I saw this with the futura (which went back). I am not so sure this is so much a problem with the device itself and not an overall issue with the DNA board. I had the futura replaced at first and ended up with an issue with the power control on the second as well... one button would not work unless i really pushed way beyond what i should have had to.

I bought two ZNA's and got them yesterday. One seems to work ok... the other does not... the second one is going back. I wonder what the ratio of good to bad has been with this device so far??????

 

[Wingnut73]

Not trying to be insulting either way. Is that a clone or the original taifun GT? I forget which thread, but someone posted a pic of the zna and original taifun GT ant it sits flush..... just curious if there are variances.

It's original. It's all about the 510 adapter as far as getting it to sit flush. I think the only variances are the 510 adapter screw and the actual top of the zna device itself.

 

[oh u mad]

is it okay to clean the dna screen with 99% iso alcohol? or can it fog up?

 

[JENerationX]

I used a q-tip and not too much liquid, although the DNA board is waterproof.

 

[oh u mad]

I used a q-tip and not too much liquid, although the DNA board is waterproof.

wow, did not know that... so nothing will get damaged if juice/water leaks inside the ZNA?

 

[Cjgroe]

Love my ZNA. I filed down 510 screw, now everything sits nice and flush

 

[Loop]

Am I wrong? It looks like there is still a gap in between the top cap and the atty. I read somewhere on Reddit that a user was ordering all kinds of different screws to test for replacing the long screw that comes with the ZNA. I lost track of it, but a google search will do the trick.

 

[frazz]

Am I wrong? It looks like there is still a gap in between the top cap and the atty. I read somewhere on Reddit that a user was ordering all kinds of different screws to test for replacing the long screw that comes with the ZNA. I lost track of it, but a google search will do the trick.

Not with this one baby

 

[joeaux]

A bit of pr0n.

 

[eda123]

Oooo nice! Did you have to throw on the 3D 510 adapter?

 

[joeaux]

Oooo nice! Did you have to throw on the 3D 510 adapter?

Yup. I had to grind the 510 adapter center pin down a bit with the Dremel to get it to sit as flush as possible. This is a clone. It is one incredible device. Vapes like crazy and the little tank in the bottom is genius. I'm gonna get a real one now that I know just how good a device this is. But my Z2 Z-Atty comes first next month.

 

[Mezrein]

Can someone post a pic of the zna in 18650 with a kfl or russian next to a Provari also with 18650 and russian? I want one so bad it's not funny


Sent while on the move with Tapatalk

 

[arh32]

A bit of pr0n.

What is it?

 

[VarosVapor]

Yup for sure. It's only DNA 30 and ENS or SM are the only "authorized" sellers from HoH. If PV has them, they got them from one of those two places and are reselling them. Huh, they're on the website though. And it does say "DNA 20". Maybe a misprint or mistype. Also says "The Perfection Vapes 20 watt ZNA was EXCLUSIVELY produced for us by the Zen master himself at House of Hybrids." And later in the description is says "30 watt chipset". Maybe Mike made them some or has some agreement with him. Also says "out of stock". Imagine that. >.>

If they have them that's good though. The more places selling them, the easier they'll be for others to get a hold of. Which is keeping in line with what Zen wants. More product to the people who want them.

as of 8:18PM 2 left in stock at Perfection vapes, I just grabbed one. I checked with Chris at Perfection and they are DNA 20 which is fine for me.

 

[VarosVapor]

E-Cigarettes in Buffalo New York | Perfection Vapes

 

[joeaux]

What is it?

It's called the 3D by Atmomixani. There are a bunch of reviews on youtube but basically it's a dripper with a 1.5 mil tank under the build deck. The top cap is like a plunger. When your wick gets dry you just push down the top cap and it squirts some juice up into the wick. The thing is a wonderful device. Mine is a clone. As good as the clone is it's convinced me I want a real one.

 

[joeaux]

as of 8:18PM 2 left in stock at Perfection vapes, I just grabbed one. I checked with Chris at Perfection and they are DNA 20 which is fine for me.

Sweet man! It's cool that they have them. And yeah, a DNA20 is good for most things. I really don't need a DNA30. I hardly ever use my Vaporshark DNA20 over about 15 watts anyway.