Limitless+ Help

[humax]

Okay got the SS coils in the Limitless+ power is set at 32W and temp is set at 440F and i can honestly say its rubbish i get better clouds from my Bellus.

 

[abn75]

Cloudz man? Get you a buddha v2 rda, throw some 20 gauge in it, 6 wraps at 3mm, wick it, crank the power up and gooooooooo. Don't be vaping at no sissy 32 watts. Crank....it....up.......
Lol. Sorry had to do it.

Sent from my SM-G930V using Tapatalk

 

[Smoke_too_much]

Hi Humax
Last weekend I did the same pulling one of my Limitless +'s from its semi-retirement with a vow to make it work better. Its design is virtually identical to several other RTA's I have and as such couldn't understand why they had't performed for me, I have 2 of them.
I ended up pulling out the claptons that were there and went to a SS 316L 8 wrap dual tight coil with rayon wicking and was surprised at how much better it was performing at 0.2 ohms and 60-65 watts. Make sure your airflows are properly adjusted to give it max air flow to the coil, that dosen't mean wide open it, it means the opening's pointed directly at the coil and closed down for max air flow pressure toward it.

 

[Cheallaigh]

heh smoke, you wouldn't believe how many i've encountered who haven't clued in to the airvent placement... they fiddle with the caps blindly and end up making it even louder and less tasty etc... i pop their cap off place it right and poof, much happier and less whistling.

 

[mongo74]

Set power to 45w and temp to 390-400f and try again. Make sure your vents are aimed at the coils and DO SOME WRIST CURLS!
And one and two and three and VAPE
And one and two and three and VAPE

 

[humax]

Thanks guys going to give this a try

 

[mongo74]

Remember, unless you're using rayon, cotton starts scorching at 420f.

 

[Smoke_too_much]

Remember, unless you're using rayon, cotton starts scorching at 420f.

What does Rayon scorch at, do you know?

 

[mongo74]

Ignition temp of cotton is 255C....rayon 420C

Wool Burns

 

[danny c]

Okay guys in my quest to blow man clouds i am going to break out my Limitless+ rta in the past i have had no luck with it and its just gathering dust behind the back of my TV. What do you guys recommend coil wise for it. Everything i have tried so far has not worked and i get a sickly feeling when i vape it almost like i sucking in more juice than vapor i just find it a bit overpowering and i only vape at 30w.

I use the limitless plus all the time, in the house there is an avocado, a twisted messes, baby tfv8, tfv4...the limitless is my top choice....anyway.
I smoke on a wismec rx200 and I try different styles a lot but my favourite and current is this.
Dual parallel kanthal at 24awg. (So each side of the post I wrap two coils at once)3.5mm id, 8 wraps long, 0.18 ohms. It throws clouds, big clouds and i vape it at 130w all the time. It takes all the 200w the wismec has. (Well baring in mind it's what the wismec takes from the batteries,either LG hg1 or efest)
So I wick with cotton bacon, I don't get any spit back from juice. Maybe try wicking differently, but the limitless is great. Hope this helps.

 

[gotch23]

I've got the limitless plus. I too find it best at 60-65W. That's where i vape it at,
and that is with the airflow more than half closed off. Way more power is also possible with this one.
Coils... if you're on a regulated mod, they're not that important. That 26awg SS sounds reasonable,
maybe with 8 wraps around 3 mm for a decent coil surface, better spaced if you also want to run temp control (i don't).