listing side by side mods

Shawn Hoefer

ECF Guru
ECF Veteran
Verified Member
Jan 21, 2015
11,191
49,147
58
Arkansas Ozarks
Yeah, but I don't vape below an ohm, and then there's the question of coil availability. I read somewhere that it might take Kanger coils, but I wont bet the farm on that. I do like top fill though.
Bet the farm... go ahead... it takes Kanger Subtank coils just fine. AND comes with an RBA...

Sent from my SAMSUNG-SM-N910A using Tapatalk
 
  • Like
Reactions: aikanae1

StealthyTX

Hates brass
ECF Veteran
Verified Member
Feb 13, 2012
1,094
5,849
Austin, TX
Well, took a look inside the battery tube and the thing is filthy. Not exactly confidence inspiring. I tried cleaning it, but normal sized Qtips are too short to reach

Ignore the fish tank tubing :)

JUhSWhn.jpg
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,968
182,764
Midworld

OhTheAgony

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2011
1,583
3,429
Netherlands
I've been following this thread for a while now but wonder, are there any happy Athena Envy 22 owners here?

I did a search but could only find one short thread with some info on it. Is it still to new to be well known or is there another reason why it isn't all that popular perhaps?

I know there is a more refined - or at least better finished version out there that goes by a different name but I just don't like the way that one looks while I love the looks of the Athena.

I'm also curious if the Athena would accommodate a EHPro Bachelor. It is a 22mm tank but it has a slightly wider ring about a cm or so from the bottom.

Any user info one could provide would be appreciated!
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,968
182,764
Midworld
I've been following this thread for a while now but wonder, are there any happy Athena Envy 22 owners here?

I did a search but could only find one short thread with some info on it. Is it still to new to be well known or is there another reason why it isn't all that popular perhaps?

I know there is a more refined - or at least better finished version out there that goes by a different name but I just don't like the way that one looks while I love the looks of the Athena.

I'm also curious if the Athena would accommodate a EHPro Bachelor. It is a 22mm tank but it has a slightly wider ring about a cm or so from the bottom.

Any user info one could provide would be appreciated!

Hi OTA - It wasn't one of the more popular mods, due to the internal battery design, but I do believe that those who have one are pleased with them. I think you'll see some of them pop in at some point.

@aikanae1 comes immediately to mind, as one whom I'm fairly certain is pleased. At least I THINK that's the case.
 

OhTheAgony

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2011
1,583
3,429
Netherlands
Hi OTA - It wasn't one of the more popular mods, due to the internal battery design, but I do believe that those who have one are pleased with them. I think you'll see some of them pop in at some point.

@aikanae1 comes immediately to mind, as one whom I'm fairly certain is pleased. At least I THINK that's the case.

Thanks for the reply
24639996112_5365340198_o.gif


The build in battery is actually a plus for me personally. I'm trying to avoid replaceable batteries if I can help it, but I realize I am a minority there (and I'm starting to change my mind somewhat, but I'm not quite there yet).

Lets see what Aikanae has to say about it then, thanks again!
 

OhTheAgony

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2011
1,583
3,429
Netherlands
Yes bachelor rta fits in eny 22 . The eny for my tastes is too boxy looking. Second thing if you accidentally touch one of the up or down buttons it does not stop till you touch it again. They can't be locked


Hmmm, that doesn't sound good. I was looking in to it as an on-the-go device but that would probably become an annoyance when bagging or pocketing it.

I personally think it's very sexy in black with those chrome accents, but beauty is in the eye of the beholder I realize.

Thanks for the info nevertheless
24639996112_5365340198_o.gif
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
I've been following this thread for a while now but wonder, are there any happy Athena Envy 22 owners here?

I did a search but could only find one short thread with some info on it. Is it still to new to be well known or is there another reason why it isn't all that popular perhaps?

I know there is a more refined - or at least better finished version out there that goes by a different name but I just don't like the way that one looks while I love the looks of the Athena.

I'm also curious if the Athena would accommodate a EHPro Bachelor. It is a 22mm tank but it has a slightly wider ring about a cm or so from the bottom.

Any user info one could provide would be appreciated!
It looked too Joyetech eGrip-ish to me.
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
I like the Smoant Knight V1 a LOT!!!!! Buuut I have to say I was a bit surprised it didn't come with extra coils. I'm sure that was an assumption on my part due to every kit I've purchased always came with a few extras.

And remember what I said about needing my mods to have substantial weight to them? Well, this is a nice hefty monster. Makes it feel premium to me.

Resized_20160430_195813_20160430_200733_zps07npwgbm.jpg
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
It takes kanger subtank coils so they are really easy to find and get. Kanger even makes temp control coils if you want to try the TC out.
Thanks Pokey. I was aware it uses the Kanger coils; just expected to see more stuff in the box is all. ;)

Kanger coils are to easily gotten so not a big deal.
 

Shawn Hoefer

ECF Guru
ECF Veteran
Verified Member
Jan 21, 2015
11,191
49,147
58
Arkansas Ozarks
I've been following this thread for a while now but wonder, are there any happy Athena Envy 22 owners here?

I did a search but could only find one short thread with some info on it. Is it still to new to be well known or is there another reason why it isn't all that popular perhaps?

I know there is a more refined - or at least better finished version out there that goes by a different name but I just don't like the way that one looks while I love the looks of the Athena.

I'm also curious if the Athena would accommodate a EHPro Bachelor. It is a 22mm tank but it has a slightly wider ring about a cm or so from the bottom.

Any user info one could provide would be appreciated!
I have an Athena eNVy 22, and I'm quite pleased. I do not have the Bachelor to test. Send me one, and I'll let you know :) I typically run either my Goblin V1.2 or Bellus in it. Both tanks are 45 mm from base to top. The Goblin has a nipple. The battery life is good. Although it claims to have a 3300 mAh battery inside, I think it's likely a bit underspecced. Or all my other 3xxx internal battery mods are seriously overspecced. There is a review of the mod on my site.

Sent from my SAMSUNG-SM-N910A using Tapatalk
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,968
182,764
Midworld
I like the Smoant Knight V1 a LOT!!!!! Buuut I have to say I was a bit surprised it didn't come with extra coils. I'm sure that was an assumption on my part due to every kit I've purchased always came with a few extras.

And remember what I said about needing my mods to have substantial weight to them? Well, this is a nice hefty monster. Makes it feel premium to me.

Resized_20160430_195813_20160430_200733_zps07npwgbm.jpg
Looking GOOD, Lex!!!
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
It looked too Joyetech eGrip-ish to me.

Agree, Lex, and even fatter than the eGrip.

I like the Smoant Knight V1 a LOT!!!!! Buuut I have to say I was a bit surprised it didn't come with extra coils. I'm sure that was an assumption on my part due to every kit I've purchased always came with a few extras.

And remember what I said about needing my mods to have substantial weight to them? Well, this is a nice hefty monster. Makes it feel premium to me.

Resized_20160430_195813_20160430_200733_zps07npwgbm.jpg


Premium and then some! Congrats, dear one. How is the heft? Feels ok to you? Really not too heavy?

Can you shoot it next to another device we'd know? Just for comparison's sake.


It looks fab, sweetie. :)
 

Shawn Hoefer

ECF Guru
ECF Veteran
Verified Member
Jan 21, 2015
11,191
49,147
58
Arkansas Ozarks
Here's Todd's take on the Smoant

I actually think the tank is a tetch nicer than the Toptank Mini. The coils are set down into a small well. This does make it a bit harder to build on the RBA deck, but it certainly maximizes the e-liquid consumption. The Toptank Mini has the coils, and thus the wicking holes, set up a bit. As such, there's always the last ml or two sitting in the bottom of the tank... Other than that, I think Todd's right on.
 

Users who are viewing this thread